Video

Put an apex trigger in when it was new was waste of money. J.M.O.

I'm curious what you paid for it brand new when you bought it?

There's rings you can buy that go around the bottom of them extended clips that make the grip continue right on down just like it is above it, I bought two of them.

Bought this pistol in 2017 for $751 for home/carry. I added the Sig flat trigger and just recently added the factory manual safety as I'm an old 1911 guy. This is one of the best shooters in my collection.

I went a similar route but different 😆. I purchased a PSA Micro Dagger C-1 it's a G48 with 15rnd magazine, RMRc cut slide, and rails. I am not a fan of the hinged trigger and will have a Tacical Pontoon or Apex soon. I love the grip angle and put a Handleit grip on mine. The barrel is the same length as a G43 but the slide is about 3/4" longer to accommodate a 2 port compensator on the slide. Uses stock G48 holsters or PSA Micro Dagger specific, I've got 100 rounds downrange so far, and no problems. It's also right at 4 hundred shipped to my FFL.

Recoil seemed very minimal at the range

I just shot this for the first time. It beat all of my compact guns including the m9a1, p01, archon type b and p10s. I was really surprised because I can usually shoot the archon type b and p-01 better than my shadow 2.

The back strap texture is razor sharp! Painful points! I used a foam sanding block to knock off the pointy dot texture. I'm 73, tough working hands, and the PDP grip texture is velvet by comparison. Thr P10 should include Fine and Course back straps in the carry case. It's really painfull !!

What reviewers don't convey is the sharpness of the back strap texture dots which are down right POINTED! Nasty sharp! I used a sanding foam block to knock the sharp points down to a dull nubs texture. I'm 73, worked 47 years in german car dealer service, master technician, and my hands are ExLaegs size, calased still doing farm wirk. The P10 back straps are cheese grater sharp. PDP texture is velvet by comparison. CZ should include Fine and Course back strapes in rhe carry case spares.

Get the .40 S&W version, and then get a .357 Sig barrel for it (many vendors). Then you've got something the same size as compact J-frame .357 (Bodyguard, Centennial, etc), but you've got 8 rounds. Hell yeah that's worth carrying. Even better if you do a 4 inch slide swap

Good gun but my canik sfx rival shoots better than any sig I’ve ever shot

Sorry I missed it KS. Great as usual. Thanks

Picked one up..along with my 365..

Hello from Glendale Arizona USA They are jumping the wall Please send troops and weapons

S&W upgraded their trigger, is your opinions still the same?

👍🏻👍🏻🇺🇸🇺🇸🔫🔫💯💯☕️☕️

The one I have jammed constantly 🤦

I have the SIG 320 10X. The only complaint I have it’s picky on ammo Other than that, it’s a nice shoot

I wish you did the DH3 as well. I have the DH3 9mm and it's amazing. I bought the X-Carry Legion and not the X5 because I knew I was getting the DH3 so I have both. I would like to hear your thoughts between the two!

Just bought this as my first firearm. Feels good in the hands with the extended mag.

Surprise ending!

150.00 plus tax and 15.00 shipping worth buying multiples? Thanks William

Meanwhile, 2023 the G26 Gen5 has front slide sarrations, 'improved' trigger, marksman barrel, removal of finger grooves As Martha Stewart says " its a good thang ". 👍 I replaced my Gen5 G26 with a H&K VP9 SK

clickbait. Fuck you. Enjoy my dislike

I would love to see you do a P10F vs P-09 vs P-07 comparison review. Full size, 4.5" and bigger models don't get the attention that all the compact, sub- compact, pocket fad guns get. Ergonomics matters. Balance weight matters. All this concealability makes me puke.

Get the - P10F OR SR - and get 21round magazines, optic cut, suppressor ready, longer barrel. Full Monty goodness 👍 Good presentation ⚠️ The back strap texture has razor sharp pointed dots. First thing I did to my Large rear strap was to sand down those painful traction dots. The Walther PDP is velvet by comparison.

I have a CZ P-10 C. It’s a great weapon and the price can’t be beat. Light recoil. Feels great and You can also interchange the P-10 series mags. So the P-10 S can use the F 19 round mag. Common brother. You missed that. The Glock Gen 4 is still in the $400 range and CZ is under $400. I would say Glock has interchangeable parts by CZ is limited. Both good guns but CZ is a better gun for Me.

Metal weight and the shape of the 75 family of grips matters. The base model 75 is a gold standard since 1975 ! All these 75 variants have the basic fill-your-palm perfect ergonomics. And bonus of replaceable screw on grip panels to your liking. Textures, materials, colors, the grip panels are a buffet. I love my p-07 & p-09 Suppressor Ready pistols but wish the grips had 75 ergos. That's the loss with polymer design. VP9, P30, PDPs have it right in the ergonomics designs. Too many great choices. Don't know if I will ever boil my team down to Just One Pistol My A team as it stands now?: Glock G17L PDP Full 5" Sig P226 Elite VP9 SK G19X P-09 & P-07 Suppressor Ready Love your presentations 👍👍

My every day carry is a Glock 42 with Trijicon HD XR Night Sights and a 9 round ETS magazine fitted with an XGRIP for a full three-finger grip. I load the magazine with 8 rounds maximum, plus one in the chamber, to ensure 100% reliability. Ammo of choice is Underwood Extreme Penetrator 380+P. This combination has very little recoil, is very controllable and EXTREMELY accurate! I carry it 24/7 in a DeSantis Nemesis Pocket Holster and honestly it's so light and compact that I forget it's there. The best self-defense pistol is the one you never leave home without!

I’ve had the compact version for 4 years now. Same internal works, just a shorter slide, barrel and grip. For takedown I’ve always used a shell casing or live round to pry the pin out, no tools needed. Just use common sense and don’t have a live round pointed at you while doing this! I’ve kept the stock sights but I do also use a rail mounted laser. And I practice with both. Someone commented this gun has a combat trigger, not sure what that means. But as far as hammer fired triggers go, this one is excellent. You’re never going to get the feel of a striker fired trigger in a hammer fired gun, at least not in this price range. I’ve got a Glock 36 and a 9mm Shield. But the Security-9 compact is my EDC. Small enough to conceal but still has enough heft to absorb felt recoil. I’m not sure I would ever opt for the full size version. If I’m going full size duty pistol then I want a 5” barrel. But if the price is right then I wouldn’t pass on it, these are good guns.

HELP Holsters IWB an OWB for Wilson

I'm not impressed.. I bought a drop-in threaded barrel for my S&W M&P 2.0 C 9mm, it's gonna take serious polishing or smithing to use the barrel because it isn't properly milled or was over coated. No i did not order the semi drop in either.. I've been on the phone with Faxon twice now. I'm probably sending the barrel back because I don't want to pay to have the barrel modified or my slide smithed to use the barrel

I freaking hate grip safeties, just shot my new Bul Armory the other day and it definitely dug into my hand after 200 rounds. I would go Wilson for my next "2011" for that reason alone.

Cool video 👍

What are the prices

Glock is the daddy of handguns

I’ve as the 3.6 optics ready 2.0 and I just got the p320 x compact pro cut…. Definitely prefer the x compact WITH the Wilson combat grip module. The sig has less recoil to me. The M&P feels better and has THE BEST factory grip texture but that means nothing if I don’t shoot it as well.

This video motivated me to get a shadow 2 compact. That pistol is special!

What do you think is better for CCW this HK or the Walther PPS M2 ?

Is the p938 easier to pull the slide back any more than a p365? Thanks!

I love the Glock 26, but not the trigger. So, I changed the trigger. Then, I wanted night sights. So, I changed those out. Later I wanted a red dot, ported barrel, slide cut outs and better stippling on the grip. I ended up with a custom Glock26 pattern Poly80 G26. I think I'm happy now.😂

I agree!!!!!

I agree with you. I didn't think you had enough guts to say it! Great video

Every day I look at the M17 it starts to look more and more like a civilized Desert Eagle🏁

Reality check. Night sights don't work outdoors in day light 99.8% of my shooting is in daylight. I'm sleeping at nite time. Page 6 in the Owner's Manual states do not 🚫 dry fire. Use the provided dummy round with the 4 Green Rubber primer inserts to protect the firing pin.

P-07 & P-09 Suppressor Ready models are the most accurate pistols that I've bought in 60+ years of shooting. Page 6 in the Owners Manual states that you ahould NOT dry fire. Use the supplied dummy round with the 4 green rubber primer inserts to protect the firing pin .

Please do more live streams.

And, when doing qualification, scored 100% on 9"diagonal square for 48 rounds with my G2C. 5, 10, 15 yards. BTW, the near-instant reset is the key. Immediate. Can stay on sights.

Do Security and private investigation. The Taurus G2C is my choice by far. Mechanics. 12+1 Rounds. Trigger. Cost. I have belt clips on all 4- available online. Prefer them to my Glock 23/19 and my KelTech 9.

Page 3 of the CZ Owners Manual states ⚠️ Do not dry fire without the enclosed dummy round, and the 5 rubber inserts ⚠️