John Deere 2030 Removing the Gear Shift Cover
Vložit
- čas přidán 2. 08. 2020
- As part of the repairs to my John Deere 2030 I ma going to split the tractor to look at the POT brale and see why it is jumping out of reverse gear. This is the first part of that job.
Our parts store is here: www.queenslandtractorspares.com.au
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project. - Auta a dopravní prostředky
Hi Bundy,you are a fantastic profesor off traktor repair,
Wen I fix my JD2030, always look in your video's,they help alot
Thanks for all work, its great
Best regards from Poland 🚜
Glad to help
hello..just want to say thank you...your vids are better then any ive try to use in the states....got to admit..i need my hearing ads in to try to desifer your words...but heck....your hands tell the truth!!!!....your voice just makes it more interesting!!!!!..blessing to you brother down under.....steve in texas
Is there an Aussie to USA translator? lol.
@@BundyBearsShed yes....but it only works with like minded men who know how to get the job done..after resealing 7 of 8 hyd leaks on this stinkin green 2940 junk....lololo i told the boss....ok...now sell it !!!!!!....the pitting in the rt steer tube was to deep to hone out...so...im not as good as i used to be.....and after 45 yrs of wrenching....my feelings are not hurt...tks bro...
This was awesome Lance and thanks so much for posting. I was amazed that the cover basically comes straight up and off (albeit carefully) once the PTO lever/control housing is removed as well.
I have a bad leak coming out underneath the right gear shift Boot on a 1640 during hot weather and running heavy PTO equipment so your video is very much appreciated. Cheers.
Good to go I would think now Jim.
Good to see you working on a bit of green for a change Lance, watching with interest as my 2035 is very similar but without hi-low. cheers, Derek
Cool, thanks
That was a good one Lance it was interesting stay healthy regards John
Thanks John, you too.
Hi Lance,
I live in a town, never owned, driven, or worked on a tractor however i find them really interesting... Looking forward to the next episode.
Cheers
Paul,,
Thanks for watching!
Lo que necesitaba... Gracias! Saludos desde Argentina!!
Thankyou.
Working on a 1973 John Deere 2030 myself. I’ve got to tackle a major hydraulic leak at the base of the steering wheel. It’s going to be a pain, but doable. Looking forward to watching the rest of the repairs to your 2030. They’re great tractors. Thanks for doing the videos.
A while back I did a video on doing up the steering column and removing it, that might help.
@@BundyBearsShed sant din romania spunetimi va rog pompa de transmisie cati bari scoate
I have a feeling i will be binge watching your videos. You know your stuff and are a good teacher. I've got a 2020 with no brakes and the hydraulics chatter and sometimes stop when using the loader. It's new to me and doesn't appear to have been maintenanced regularly. I'm hoping it's just clogged filters from brake parts.
Welcome aboard! Check the screen and it will tell you a story.
@@BundyBearsShed hopefully i like the story !😁
Would love to get some tractor advice from you. I have a 2030 that has stopped moving, after sitting out under open sky for a week. Hydraulics work well. Back PTO engages. but it just won't move once put in gear. not grinding, at least i feel no griding sounds or vibrations. Clutch pedal goes in well. I mean I'm able to engage the back PTO no problem. Wheels are not locked, cuz we tried towing it and it rolls free.
I had one that sheared the crown wheel rivets off so you could look in the rear oil filler to see if the crownwheel is moving, we fixed it in the field with trailer wheel studs. You may have torn the centre out of the clutch plate possibly.
Great stuff! Looking forward to seeing progress on this one.
You and me both!
Sound make a video of putting it back together
One day, it is still apart
A great video! I had to remove the shifting levers. How do you get the shifting lever snap ring back in without damaging the aluminum cover?
Use small snap ring pliers or feed it in as a spiral.
I separated my 2040, open center hydraulic series, between the clutch and transmission and your videos are very helpful. I have the manual and to find the information about the 2 hidden bolts under the shifter plate takes careful reading. I’m replacing the transmission pump. The pump gears were destroyed. Have you came across in your repairs?
Yes it is a common thing with the older tractors especially if the oil has been dirty.
hi, thank you for very good videos it helps a lot to repear my john deere 2140. But I have one question so mayby you know what happen. After trakctor spliting and changing transmition pump I put back everything in place, but after a test drive my gears starts swich out off possition and traktor stops. With gear box I don't do anything. What can be wrong?
The main gearstick? It is hard to say as you are not in the back box.
Hi lance, my John deere 2030 has been sitting only a couple of months now it's clutch is literally locked on for some reason. I'm going to try drive it around and hit the brakes hoping it will free up again. Maybe clutch adjustment might need attention ?
Thank you
Pete Rizzo
They get sticky in humid weather, Tie the pedal down and get in a high gear if possible and bang the brakes on a few times and see if it comes loose. If not it is a split but they often do come free.
I am interested in your up and coming videos for this tractor split because I may have to do the same split on my 2130. I am having a hydraulic issue on my tractor and finding many culprits to the shuddering hydraulics and pump chatter: fluid leaking past the loader control valve, power steering leak (still need to do, thanks for that video), SCV valve leaking oil into the rockshaft housing. I have checked and eliminated the other possible issues like the bypass valve(again thanks for that vid), the screen behind the housing drain plug, resealed the rockshaft valves and the loader is ported correctly to the filter housing. I just had my shift cover off and was testing the oil supply pipes with compressed air to find a leak. The large supply pipe closest to the engine was not holding pressure and I could hear air blowing lower down in the case I think this may also be a problem. Could you detail testing these pipes a bit? Thanks I really need this tractor fixed, it's the middle of hay season here in Canada and I am down on my main bailing tractor... I still have my faithful David Brown/Case 996 going though.
If SCv is leaking in to the rockshaft housing the valve is crook as on a closed center system there should be nothing with everything closed.
@@BundyBearsShed Yeah I have the valve capped at the SCV line in at the moment and I also capped the power steering line but the hydraulics were still acting up.
Do you think its worth trying to rebuild my SCV valves or should I just get an aftermarket spool valve? Seems like the SCV parts are more expensive as just buying a new spool.
How do you put that pto housing Hi-Low back on? I'm having trouble aligning that fork thing on the bottom I'm working on a 2440 kinda similar but mine only has one for the the HI- LO
Make sure the box is in neutral.
@@BundyBearsShed thanks I was able to put it back, but now my PTO won't engage, I replace the brake and clutch line, and also the PTO brake band, when it came in the rear PTO shaft was free spinning with tractor on, but now it won't engage
Hi, I have just taken off my cover as I have a leak. My welch plug is not there! So explains the leak but can't for the life of me find a part number for one. Do you know the part number or can I improvise with something? Many thanks
Let me check
Saludos hermano estoy en Venezuela quisiera que me ayudarás con mi tractor JD e mi primera vez con maquinaria
What is wrong with it?
Looking good, but wait its the wrong color? Am I in the wrong place? Haha
lol
have a 2030 jd is not equipt high low have 115 psi at shifter top front pump is starving for fluid have checked by pass in shifter top and both check valves on side of transmission can fill resivor tank by oil cooler and front loader works perfect till tank runs dry filters are good too? any sugestions would be very helpful thanks in advance
Check press with PTO engaged and see if there is a difference. You might have a high pressure leak that is not letting the front pump catch up so blank off the steering and look in the trans filler and see if there appears to be leakage in there.
@@BundyBearsShed thanks when you turn on pto pressure drops down to 50 psi for about 1 second and goes back to 115
have replaced front pump too which was not the problem
That's fine
@@BundyBearsShed so you think i still need to block off steering with good pressure while pto is on if so how do i do that thanks again of all the people ive talked to you are the only one that knows what hes talking about ive looked in fill hole for a leak cant see one but that dont mean theres not one
I have problem my John Deere brake hydraulic filter cap
New caps can be bought.