Video není dostupné.
Omlouváme se.
#car
Vložit
- čas přidán 6. 07. 2024
- The main car beauty products, whether it is to repair the damage of the car or make your car more new, you want the product I have.
Polishing wax, mirror treatment agent, gloss maintenance agent, headlight repair solution, scrub machine and so on...
If you want more, let me know in the comments section.
WhatsApp: +86 15621647158
Вы можете ознакомиться с моим магазином автозапчастей на главной странице моего аккаунта. Я надеюсь, что смогу вам помочь!
Is that your missing 10m?
Maby 13mm 😂😂😂
Don't forget it can be a bearing 😅
That's no socket.
😅😅😅😂😂😂😂
@@Eli-jah098 It is a roler from a big bearing 🤣🤪😁
You saw it sitting there and still proceeded to start the car real smart
It’s called a quick dislodge😂
Man I can tell your about as smart as mule and have extra donkey in ya then most
"ooga booga gotta make a video"
That's where the 10 millimeter sockets end up
Exactly!
Not only did you see it and still start the car but you also stood right next to it threw out everything....this is devotion to the craft my friend
Paint it that color, gotta show it off. Pretty pretty.
Remove the key 10 socket from the i
Поршня тоже покрась😂
Зачем поршня красить лучше бензин покрасить 😂
So that’s where they go 😂
Looks like an alignment dowel to me
На мем авто так же гайка каким то образом оказалась в полости маховика. В один прекрасный день она попала между зубьями маховика и колоколом. Раздался визг и тишина. Я сначала подумал что двигатель дал клина, хотя не должен был. Потом решил что АКПП заклинило. Пришлось разбирать, а оказалось что сраная гайка столько проблем создала😂
I
Ain’t got no gas in it
One more time 😮
So its the the thrust bearing 😂
So instead of fishing that thing out of there you start the engine and risk that this thing gets acceleratet through the casing?
Mine always fell in the oil Pan ! 😆
Thats where the 10mm went. Dang.
guy was casually standing in the line of fire
Center force clutch setup.
The Little weights spin to balance the pressure plate and clutch out.
That's what happened to that 5/8 socket
I wondered where that socket went😂
No way that socket got in there 😂
Это его счастье, что не закусило и не отломало половину делителя😂
I've had that problem with a bolt.😅
Somebody left their socket in there
Nickelodeon green, nice haha
So what is this supposed to be You painted the damn torque converter green what's the big deal with that
1/99 10mm sockets found ,98 sockets are still out there
They would need to show the customer this video thats why they recording it. Probably gone in garage for a knocking sound and the guy is missing his 25th 10mm socket attachment. Fortunately for mechanics owners stupidity is a lot of their income.
Seems fine to me
Those 10mms always missing 😂
I mean... we all been there 😢😂
That's not right as a mechanic the gearbox has to come out because it's will only kill the gearbox
Don't hate when u find thing in wierd places lol
So that's where the ten mm socket went too 🙈
10 mil. I had the same issue, it was done by a crappy mechanic, but it was not only the socket, there was 2 extensions rattling inside the tranny pan & one of those got stuck in the clutch.
Pay Crappy Money get Crappy Work......
Looks like the missing 10mm got found
Lucky it didnt get jammed and destroy your bellhousing. I dont believe you started it like that!
Pull the starter and get it out.fixed 😊
Wtf man you want that socket to blow a hole in your bell 🛎 end 😂
That damn 10 mm😅😂😅😅
Loose torque converter bolts
Ремонт в 50 т обойдется😅
Welp someone effed up..
Смотрется😂
theres my
socket
Это карбюратор засорился, ничего страшного!
found his 10mm
башку 😂 что ли забыли , в карзине
On dirait une Ducati 😂
Снимаем коробас😂😂😂
А что так можно было.❤😂
is that a fucking lifter?? 🫣🫣😵
10 mm?
Customer states. Lmfao
Unnecessary part 😅
Per di tekanan kopling ada
بلبرینگ
Повезло что эта фигня в дюндель не вылетела
een boud Ier uit ge lopen 🤔
The fucking 10mm
La copa 10
😮
No okey 😮
So T56 with removable shroud, looks like a weekend drag car…. How you going to leave a socket in there😂
Porque le faltan 2 bulones de anclaje inferiores a la caja ?
Probably a swap
😮😢
Это шуршик завёлся
Выжимное
릴리스 포크 & 베어링 손상😅
Damm 14 mm
12 mm socket not 10
Kerp doin that, it will come out thru the new hole eventually.
Так и должно быть