Video

Are you trying to say that seeing what was necessary to pull a car up on a trailer using a second vehicle, using a strap and a Quick Link or "Connecting Link" was not descriptive enough? That you needed to actually see the slow process of actually pulling the vehicle to see how it was actually done? Use your imagination.. Everything else needed was in clear view in the video. All I did was pull forward, which pulled the towed vehicle forward and then stopped.. Did you think I did something else sneaky off film? Just in case,, it took 2 people.. One in the Blue Tahoe and one in the towed vehicle getting pulled up. I didn't flag anyone down on the highway to video that part.. BUT,, at least you should know how the Strap situation works, and, that is the most important thing... But, you might consider doing something else other than what I did to be safe, since you feel like what you saw was "No Help at all".. It could be dangerous for you. Personally, I felt like there was zero danger, but, that video would have been enough for me to begin with.. Kind of like using a table saw without a riving knife and every other Safety attachment.. Didn't use them for 60+ years, why should I bother with using them now.. But, I would highly recommend "You" use them all..

BTW... What is your CZcams Channel and what Free Contributions have you made to the CZcams Community to help others who help you? Just wondering.. I don't see where you have uploaded anything!! But, you still complain? I see you didn't waste your time, showing someone EXACTLY what to do and how to do it, only to have someone complain about it.. Get the trailer and see if you can figure out how to do it yourself.. When you do, and you see what the problem is, since you have trouble imagining it,,, when you do, you can refer back to the video and see exactly what I did that you can also do to make it easy to load up what you want to load up... I wish CZcams would force people to upload content to be able to see content here on YT.. It would reduce "keyboard driver errors"like are above. Maybe you could put something up about the Clinton Global Initiative, or, maybe something about how Radical Islam is a Religion of Peace.. Maybe quote some of the verses in the Koran that tell you not to even associate with people like me, and to c-u-t my head o-f-f. Let me know if you don't know the verses, I'll send them to you.. I wasn't surprised to see your Subscribe list.. It just goes to show. The Fox News Tampa did seem to be out of the ordinary for someone subscribed to the Clintons Initiative.. BTW.. What does Jihad mean again?? Talk about wasting my time!! But, I type with all 10 fingers, so, well worth the comment..

No.. Nothing in there that is wet.. Just drawers of tools and materials.

Still going.. It was pretty cold, and my sinuses were pissed, etc.. But, smoking is not good for you and, they put so many extra chemicals in Cigarettes, they should be made illegal.. I'm sure half of them are designed just to be addictive.. I have done a lot of things in my days, but, cigarettes has to be one of the most addictive things I have ever dealt with.. I'm sure it is equal to or worse than Meth, Heroine, etc... But, it was handy during the Plandemic.. Nicotine kept the venoms off of my Ace 7 Receptors and didn't have any problems with Covid.. My girlfriend (non-smoker) was coughing/hacking for 2 weeks, sleeping in the same bed, me taking care of her. I worked a project all night and got 7 hours sleep over 5 days, woke up the 6th day and said to myself,,, aw shit, it got me.. Took a double dose of Ivermectin and about 6000IU of Vitamin C, went back to bed, woke up 4 hours later and I was fine.. First thing she asked me was,, "What was that you took"?? I told her, the "Horse Shit" is what you called it when I tried to give it to you.. Ha..Ha.. Can I have some?? Ha..Ha... Yep,, 3 days later, she was back to work after 2 weeks of coughing/hacking... Makes you wonder why Fauci and the FDI lied about Ivermectin working.. Besides,,, it was invented for Humans for what is called River Blindness, and, it is listed on the WHO as an Essential medicine and one of the few that earned a Nobel Prize.. It and Hydroxychloroquine(best in early stages of Covid, but, not later), are safer than taking a tylenol.. Shame our Government and Medical Systems are so corrupt.. Just search the NIH.Gov website as a google advanced search for the term "Ivermectin + Cancer" and spend an hour reading the studies.. Same with Corona and Cold/Flu.. Yep.. The Medical books up until the Mid 1970's, had a section called "Disease Transmission", and there was ZERO mention of Virus, which in Latin convert to "poison or Venom", it was all about Parasites.. So, Ivermectin first for ANY problem you have, because, it is THAT GOOD!!! Something they hoped we would NEVER learn about... Ha..Ha.. Too Bad... Look up Alfa 7 Nicotinic Receptors and Nicotine.. The receptors prefer Nicotine over the Venoms they were pushing in the water, etc.. Next favorite is Ivermectin, but, you need to use Binders to get the venoms out.. Bentonite Clay 1/8 tsp per 32oz a day, every day you take the IVR, and it should be taken in 3 doses.. One per day for 3 days... A double dose the first day.. Best IVR is the liquid for Cows/Pigs.. Simple dosing is on the bottle.. 1 CC or ML per every 110lbs.. Get a 3cc syringe with the largest needle you can buy for it and you are ready for their next plandemic. Be it Disease X or Bird Flu.. Not sure which one they are going to push on us.. Good Luck.. Don't smoke, you can get nicotine from the patch, or chew while they are pushing the shit on us.. BTW.. Google Covid-19 and Venoms and spend an hour reading.. It's not a secret any more.. Too many studies to hide it.. But, don't expect to see it on CNN/MSNBC OR Fox/Newsmax.. They are ALL owned by the same people, follow the money trail high enough.. Same as the Democrat and Republicans are two wings on the Same Bird, same as most Prosecutors/Judges and Defense attorneys act like the fight and hate eachother in Court, but, they eat/drink and spend their bribe money on the weekends together.. Cheers!! Trump 2024, or, live in this Country by yourself.. I'll be elsewhere..

Glad you are still hanging in there!

No. Wine finnning is more of a degassing process than filtering.. Degassing pops the tiny bubbles that the particles are attached to and then, it starts clearing. Maybe if you had an off flavor and wanted to see if it would do something with it, etc.. But, no, that is not what the filter would be for, and I would imagine would require cleaning the charcoal a lot more often.. I have a video on degassing wine, which is what they call Secondary Fermentation.. I clear my wine pretty quick. It usually takes me an hour or so to initially degass it, then, I run it again the next day/morning, just to see if I have any more, then, I hit it with the bentonite and the next day, it's either completely clear, or, one of those that is going to take 2-3 clearings to clear up nicely.. There may be other finning agents that work as well, but, when I first started, I tried a few, and bentonite always did the trick for me, so, I stayed with it. Every now and then I will make something that is heck to clear, but, I am not experimenting like I used to. I have 4 or so favorite brews, so, don't run into it often.. I did a bananna once and oh boy.. But, I know a lot more now and wasn't degassing back then either, or degassing manually... Talk about degassing manually on a wine makers forum and they will give you a hard time, but, when I introduced the idea, the three moderators started doing it quietly and were all talking to me about it.. It was one of those "How did you come up with that idea things".. Well, these tiny little yeasts create enzymes that eat sugar, fart CO2 and piss Alcohol,,,, just how small are the CO2 Bubbles they are creating? I pulled a vacuum just to see and was totally shocked and figured that was where all of the particles were suspended.. Made sense to me, so, I tried it and it was exactly what I thought to begin with.. A rather simple concept if you just ask yourself.. What actually takes place during secondary fermenting.. I stop the fermenting before the yeast get sick and die from alcohol poisoning (when distilling), or, get sick and die from a lack of food when doing wines/beers, and that keeps that bitter edge off of the wine.. They say I make Hootch, not wine, but, I can't send them a taste in their email, but, I know from the wine connoisseurs that have tasted mine,,, I would beat them in a competition... Ha..

I would think so. Get the old paint off, or, it will not cover the same.. Why don't you see if you can get a quart of hydraulic oil and do a 5 to 1 mix and choose an area to test and see what you think. Do the worst spot and you can see what it does. It should really soak in and protect it. You should be able to pressure wash and re-treat it, if it collects dust, etc... But, I doubt any mold/fungus, etc, would grow on it.. I am not sure of the area, tree cover, rain, sun, etc, but, it sure as heck works on the trailers and protects the wood. I still have not recoated the trailer and the original wood is still there and no sign of rotting, etc.. I also have it on a vertical dump trailer (1x6 deck boards treated), and those really stayed clean and look nice.. I would think it would work nicely... I would have some slight concern that things are flamable, but, can't really say that would be anymore of an issue that it would on a trailer.. Just thinking of any reason "Not" to install it.. Just thinking out loud... My trailer sits out 24/7/365. In the sun and shade. It has turned darker, but, I have never washed it, tried to keep it clean, etc.. But, I have not done any applications other than on the dump trailer, vertical boards, and they do look nice still.. No strong discoloration, never any thought of fire, etc.. I think it would work great.. If you put a clear on there and it just baked off, it is because it did not flex at the same rate the wood does (Heating/cooling, etc,).. With an oil base impregnated, there won't be any covering to crack etc.. It would have to be better than a clear coat, urethane, epoxy, etc.. Whatever you put on there has to remain flexible. Do the bottom log or something and watch it and see how it looks the first week or two. It won't change much after that..

Thanks again@@MarkThomas123

Thanks @LockBits-ts6eo. Don't let anyone tell you that Skateboard wheels don't work and don't last. I don't work in the shop every day, but, I still use it quite a bit and still on the same wheels AND bearings... But, I would not use the Chucks the wheels attach to. The Flex point in the middle, I have had to tighten down 3 times since I built the thing, but, then again, 3 times since I built it?? Ha..Ha. Who's complaining?? Ha.>ha.

It seems your Channel needs a little something to get it started. I have some ideas, but, I need to work through it. I saw something I did that, changed/refined might work! And I have some other ideas I know would help based on that trigger. . Is your D.....m@Protonmail.com email address a good working email? I have some ideas, but, I need to send you some screen captures of your channel. If you want to look at some of my videos, let me point you to 3 videos, and give you some stats and info to review while looking at them.. Keep an eye on the view count as you watch them. See if you can see any correlation to the view count. I have never made a thumbnail, don't think much about the titles, have only edited a few videos here and there. You might see one with a splash screen, if so, I had to assemble to post them, so, edited them a bit. But, let me give you some info on the 3 highest count videos and why, so, when you see them, you have some background/Guesses as to why. --- Title: Quick/Easy/Safe: Use Existing Plugin/Breaker for Generator hook up to your house Panel box. 474,847 Views 11 Min Video If it matters, 78.3%/2.3k Likes.. 1,228 Comments This one started off with the Safety Police Attacking me. I used a Suicide Cord. But, anyone with common sense can do this safely.. I had a few Thank you and one or two Safety police at the beginning. I responded to any questions and really responded to the Safety police. That turned into multiple attacks daily, and, I addressed each and every comment and debunked each and every one, only to prove, if you have common sense, it works great. So, lots of comment activity.. I did not put Harbor Freight in the comments or title to keep from getting hits based on just that. I know it would have gotten more. But, after 10 to 14 days, lots more views per day. You choose. Google finally hear me say "Harbor Freight" 4 to 5 times, or, the comment activity increased the pushing of the video.. It lasted for 2-3 months, then tapered off. I think because, YT found another good Generator Plugin video to promote and I fell off of the list. NOTE: There were 5-6 users other than myself who were responding to the Safety Police comments, so, a good bit of user to user interaction also.. --- Title: Wrong Restaurant - Gun Control Funny Video 234,132 Likes 98.3%/5.4k, 574 Comments. 1:13 Min Video. Posted, and sat there doing nothing for a long time. The guy passed away,. Old Movie star, and, the video views it got were over about a 1 month period. I think searches due to his death. Not sure how many views after that. I have not looked closely at the analytics. So, percentage of likes, likely not a big deal. Another note. Most were viewer comments, and no real reason to reply to them, so, much less total "INTERACTION"(Creator/Viewer - questions/answers). I maybe posted 5-10 comments to viewers vs 4-500 comments. Much less user/user interactions. I consider it typical for most videos. So, although good comments, I don't think it is required by a Poster to interact with the viewers to get views.. NOTE: I did ask in the comments area, why the sudden views after sitting 2 years with little to none.. I got several replies. All very similar... Popped up on my screen, I was searching guns, Gun Control and it popped up.. Some,, I recently did some research, and it just popped up based on Previous searches.. So, again, it appears like a random selection based on some gain of popularity on a particular search term "Lee forgot his last name) when he passed. But, not all were searching for his name. Just the related Topic. ---- Title: $30 (2" x 72") Belt Grinder Home Made, No Special Tools Required. 229K views, 93%/1.5k Likes, 229k comments 21:48 Minutes. This size/style of Belt grinder was popular back then. Blacksmithing/Bladesmithing/Hammer Inns were getting more popular. The grinders were $4,000 average cost new. DIY was popular. I was the first one to figure out that Skate board wheels would work ($30 vs $200) and the Drive wheel (scrap wood vs $150). Lots of Positive Comments.. Brilliant, Excellent, Great Job, Fantastic, Impressed, Keep it up, Thanks for the video, Beautiful, Love the video, I answered a lot of questions, very little user to use comments.. Channel Statistics: Joined 09/21/2012 (11 years randomly posting non-professional Videos) 3.75k Subscribers now. 190 videos 2,159,90 views total.. Summary: Title: Quick/Easy/Safe: Use Existing Plugin/Breaker for Generator hook up to your house Panel box. 474,847 Views 78.3%/2.3k Likes.. 1,228 Comments 11 Min Video --------- Title: Wrong Restaurant - Gun Control Funny Video 234,132 views 98.3%/5.4k, Likes 574 Comments. 1:13 Min Video. --------- Title: $30 (2" x 72") Belt Grinder Home Made, No Special Tools Required. 229,000K views, 93%/1.5k Likes, 229k comments 21:48 Minutes. So, if you compare, It's not the Like %, although, they will have "Some" relevancy maybe betting it started. It's not the Number of Comments, although key words in the comments could be a deciding factor and probably is. Length of video is Irrelevant. I have just scanned the analytics, but, not studied them. I don't feel confident to say much, because, I have not looked at it much, and may say something that is not correct. But, if selecting Audience and "Since uploaded(Lifetime) tells you the total number of subscribers gained/lost from that particular video, I gained 1,607 Subscribers from these 3 Videos. So, I'll go back up and add this number without an explanation, because, I am not sure if that is what that means.. OK.. Yes, that makes "Some" sense. Not sure why someone would subscribe to a channel because I had the Diner Video up, but, Considering 264 did out of 1607 Subscribers, or 264 Unusual Subscribers, vs 1343 I feel I earned, this is a pretty decent percentage of users. At least that is some food for thought.

By LABs, I think you are referring to either the KNF or JADAM Methods? I would say so. There are good and Pathogenic Bacteria and Fungi, and, Milk Kefir has a dominance of Lacto bacterias, but, also has a nice variety of Probiotics and Probiotic organisms, along with a variety of Yeasts and Fungi's. So, lots of goodies.. I have not done any of the KNF or JADAM Techiniques. I live in a Gorge. Sun from 11am-3pm at the latest.. But, I will be providing my own food when I get a second place to do so.. I will be using the Mittleider Method for food production, while working on the Soil using KNF/JADAM, and, techniques from the Soil Food Web. Nutritional Fruits/Veggies being the Target, and longer term building the Soil Microbiology with lots of good Composts. Bacterial and Fungal, and will be producing Worms to help with the Castings, Teas and Extracts to get things moving along. Yes. I will absolutely be adding it and home made Kombucha(Much cheaper to make), to my Composts. Milk Kefer probably added after being diluted, or put into an areator and made into Teas/Extracts to spray on the Compost piles.. Figure I can do a lot of testing, playing, etc.. I have not gotten deep into either JADAM or KNF, but, from what I know up to this point, I see benefits of both and I see no reason why a Mixture of the two systems could not work out perfectly. On a side note.. Don't discount Urine as a Nitrogen Source.. I did some study on Uropathy. It was quite amazing as a Health tool. I know. Sounds crazy, but, I have direct knowledge of it that will blow your mind. I am not going to get the numbers exact, but, I think they will be close. Urine Captured and kept in a room temperature environment for 21 days, has a Stem Cell Count of I think 2500/ltr when it is fresh. 21 days later, approximately 1.5 Million of the same. Can't see why Anyone would pay for Stem Cell Therapy.. Not sure how that same thing would apply in the plant world, but, it is definitely a good source of Nitrogen. If I can swing a green house, I plan on always having a few extra plants to experiment with. Fresh and Aged just to see what happens. But, just for grins.. I knew and old fella. Had two bad sores on the back of his heels.. Bed Sores. 7 Months on Wound Care 2 times a week. I told him about it. I said, what do you have to loose? I'll treat one of the two.. He said, what the heck. That was on a Sunday, Nurse came Mondays and Thursdays. I treated the worst one. Overnight, it shocked the Daughter who came to remove it Early Monday before work, so the Nurse would not see it. Sent me a picture. Wow.. Treated it Tue,-Wed Morning, removed it, then Thur, Fri, Sat, and it was just about gone by Sunday. Monday, the nurse was shocked, knew something on the last Wednesday, but, didn't say anything. Took that wound off that day, left the other on.. Three days treatment on the next before she took that one off. The daughter was there. Nurse said, I don't know what you guys did, but, it was amazing.. She knew something was going on after 7 months. The Daughter told her what she and I had done.. Surprisingly, she said, Damn,, I didn't believe it.. About 5-6 years ago, I had something just like this happen and they said the same thing and started laughing when they saw my face... I though they were joking.. The second time I asked them, they laughed and said,, "We told you already",, and she said, I though they were joking with me.. Damn,, they were telling the truth.. Then she said,, I was wondering when I saw that Mason Jar on the table, but, I said,, No, Apple juice, because, I saw a jug on the floor... Ha..Ha.. She opened it and said,, Here, not apple juice, and the Nurse got a good laugh.. Some people call it "The Perfect Medicine".. Think about this.. You are way out in the Congo and get bit by a snake.. You are 3 days from the Hospital.. What do you do? Yep, ,within 15 minutes of the bite, consume and keep consuming. It has the exact instructions in the body for the body at any given second in time.. We do not Detox through our Urine.. Dr Edward Group. He has a website related to Urotherapy Research. Not his Standard DRGroup.com that has a bunch of free books on it. Here it is: urotherapyresearch.com/resources/ The Golden Secret is a good starter book. And, if you want to listen/watch a video with him in it, start at about 48 minutes here. Anything Dr Bryan Ardis says, should be listened to closely. Dr Group also. He was on Trump's Task force.. rumble.com/v29cz8s-bo-episode-2.mp4.html If you hear Venoms, they are talking about the mRNA, just so, you don't get hit broadside.. It's true and backed up by researchers around the globe. Dr Ardis was the one who figured it out. Watch the Water on Stew Peters(Rumble) did not come out just right, but, you get an idea. Here is the version 2 of that same video. STEW PETERS AND BRYAN ARDIS!! PREMIERE: Watch The Water 2: Closing Chapter rumble.com/v2nh8xc-premiere-watch-the-water-2-closing-chapter.html If you want more, send me an email and I'll send you a "Good Videos.txt" file. Good Luck!

I highly doubt that. You may have set your regulator at 70psi, but, you didn't bring up the pressure "IN THE DRUM" to 70PSI. I would bet a paycheck on it.. If you did, and the drum somehow survived, which I would bet a paycheck against, it sure as hell would not sit flat on the rim any more.. This drum both the top and bottom bulged (not sitting on the rim) at less than 10psi.. 70??? Ha..Ha..Ha.. I have looked at a lot of drums and never seen one built that would withstand 70psi.. Why would you build one like that, if 3-5psi like this one could hold the 400 or 450 pounds of liquid material? Ain't happening. But, feel free to experiment on your own and upload a video to show me I'm wrong.. Make sure you capture the drum blowing out and show us the after effects.. I would say, keep an eye on it around 25 psi. That would be my best bet on the top/bottom seams blowing out,, if not before.. I am ABSOLUTELY CERTAIN, If I had gone above 20-30, this drum would have split the top off.. I think you need to look at the video and pay attention to what I was saying before you advertise your Computer or phone that you have some serious "Keyboard Driver Errors".. Someone else might actually think you have a clue about what you said and do something OBVIOUSLY STUPID,, based on this video.. But, like I said.. I did the video as an experiment and documented my findings.. If you are sure enough to "Blow Out Dents All Day Long with 70psi", then, why don't you video you doing this and educate the rest of us.. But, since this is a challenge, make sure there is no funny business with the Gauge and hoses not in sight.. Obviously, my video was educational and, I had nothing to hide.. Ha..Ha..Ha.. Some People!!! BTW.. I like your CZcams ID.. @user-lm5eo7hx4n What is that? Someone paying you to go around and make ignorant comments for others to see and try some bullshit like that?? What do you have? 50k Different Id's??? I would not put it past being funded by the Current Admin to be honest with you... I stopped being amazed by anything they do these days..

Why? I do it every couple of brews. When they get sticky and clump together, or I get too many in the jar, I rinse them and put them in another jar in the refrigerator to store them.. Then, when I fill that jar, I rinse them again, pat them dry on a paper towel and dust them with powdered milk and put them in another jar and put them in the freezer for safe keeping.. I have paused the operation several times, just putting them in the fridge.. And, I have taken grains that were frozen for a year and put them back in fresh milk, and after a couple of days/runs, they work like they were never frozen.. Why would you say,, "Don't rinse them with Water"? Obviously, someone else said that, and you are repeating it? Or, do you have some valid reason you have tested that tells you not to rinse them? Because, I rinse them every 3-4 or 4-5 days max and I have never had any issues.. Just asking.. "Don't rinse them with water" sounds like you had some sort of problem rinsing them.. They are tough, and you can't hardly kill them.. I have left them in the refrigerator for 6 months in the same milk.. They stink pretty bad, but, rinse them, put them in fresh milk, and give them 2-3 days runs and they work like brand new... Why do you say that?

@@MarkThomas123 I was thinking that there may be clorine or floride in the water. I guess it can't hurt them.

@@ginasahin5634 Oops.. Yes. Sorry. Yes, you should test that. I have always lived outside of the City Limits. Always on a well. Always try to get Raw Milk, but also have used store bought. Take some grains, rinse them. Cold water only. Restart them on their own, and compare to the others. I think they will survive a rinse and dump back into Milk. Then, rinse them daily and see if you can get them to fail. Soaking them might stunt them. If you can stunt their growth, stir them briskly and break them up into smaller pieces. That might get them going quicker if they survive the Chemicals. I know you can kill Kombucha Starters with White Sugar. Too much Residual Bleach. Lacto Bacteria is the most Resilient of the Gut Flora. Biffido, not as tough. Covid wipes them out, creating a huge imbalance, affecting the immune system. Documented cases of gut balance after the Biffido depletion, which fixed severe cases. 38 cases severe, 100% reversed by returning the balance. Kefir has Biffido, but more lacto. Kombucha is more balanced. Good to add to the household drink list.

Not sure what you were going to finish saying, but ,Yes, it is back in the hole. 2 people did it. I pushed it in the hole and a friend walked the end of the pipe with the fittings to me, to keep it from dragging on the ground. I did add a 1/4" Braided Nylon Rope to the pump, then a 3/8" braided Nylon rope from that 1/4" all the way up to the top and taped the wire to the pipe about every 3 feet, then the rope to the pipe about every 10foot, and dropped it in the hole..

You got it.. That's why I put them up.. Once I figured this out, I have not tried to make it any better or easier. Works great. Just two of us stabbed it back in the hole. Took us 10 minutes once we had the new pump on, added a rope to it, taped the wires to the pipe again to drop it into the hole. Everything works now. I even got a used pump from a friend.. Didn't think twice about installing it.. Didn't even test it before we dropped it in the hole.. No big deal.. If it does not work, I'll pull it back out.. Ha.Ha. Someone else would have paid $1500 to have it pulled.. Ha..Ha.. I have a second well which went out at the same time (freak thing to have my primary and my secondary well to go out a the same time.. Just got the 2hp pump in from Amazon $185.00, and will be doing that pull/drop within a few days.. Had to fix a toilet flange and fix a minibus power steering box in the mean time.. What a week..Ha..Ha... :)

@@MarkThomas123 would you mind if I shared your video with my Well company ?

@@egreenspot Ha.Ha.. Yea.. Go ahead.. They might not like guys like me telling people how to DIY.. They charge $1500 around here to pull one.. But, they should charge a more reasonable rate, so, get a grin for me when you show it to them.. Ha..ha.. Bet they are saying,, "SOB" under their breath.. Ha..Ha.

@@MarkThomas123 not to worry, this outfit only sells to DIY folks and told me they don’t recommend any one single way to remove an old Pump, though yours is probably the easiest way I have seen on CZcams

@@egreenspot Oh.. Ok.. No problem.. If it helps anyone, that is a good thing. I learn alot from others on YT. If you have black pipe, it is the way to go. I pulled another today and put a new pump back in.. 185 feet. Same technique. If you use a portable generator around at your place, I have another idea about as slick as this one. If you have any doubts, we debated it quite a bit in the comments below it. You just make a Male to male short extension cord and use an existing 220 volt at least 30 amp plug like a dryer or stove plug, or, install one near your generator. I use my Welder or Compressor plug for my Generator when I need it.. Not going to use my 220v Welder or Compressor while running the Genset anyway.. Lots of different ways to skin the same cat. Ha.. Cheers!

Our pleasure!

Ha..Ha.. If it still works, keep it.. You can always find used/no good refrigerators at your local dump, where they collect the metal to throw it away separate.. But, yes.. They make good toolboxes.. But, you have to dig the foam out of them usually to save space and get the box braced up, so, no need to waste a good working refrigerator.. Can keep water/beer, etc in your shop, or sandwiches, etc.. I kept mine with Food, etc.. I didn't have to stop to go into the house when I wanted a snack or lunch, etc... But, it is yours, so, do what you wish with it.. But, it is easy to get one from the dump.. I see them every time I go to my local dump, to dump my dump trailer. Good Luck. It was an interesting project..

@@MarkThomas123 I think I changed my mind probably going to leave me original but I'm just going to put plywood top of the racks make it slide in and out screwing anything in it the compressor has been upside down for a long time because you could take it off it may not work anymore I don't know I'll find out

You get the picture. I was in the Tahoe. Kind of hard to video when driving away. For me, the point was getting it on the trailer. I shared the video, so people could see how I did it. If you noticed how I did it, you should have Also noticed it could be done without the truck hooked up to the trailer, Using a pair of chocks. I had to try to figure out how to do it by looking at online u haul pictures... Watch the video again and try to use logic and reason and physics . Because, This is not a project to do if someone needs to hold your hand. That project is to show you some possible things to use and some ideas.

My kind of state.

Que bom que te ajudou. Obrigado. Tradutor do Google se eu disse algo errado.. Ha..Ha.. :)

I'm sure that would help.

@@MarkThomas123 I imagine it would hold hundreds of pounds of air pressure. The Drum would not be lending much strength to the operation at all only air tightness. Whether the pressure was able to bust the vessel on not would depend on the concrete.

@@herbertbell9438 Yea, plus if you put air in there, it will rust, so, not the greatest plan for the effort and cost. Keep your eye out for a good air tank, or, some other kind of pressure vessel.. Check to see how much pressure a Freon tank holds.. Might be able to connect several with hoses until you find a good tank. Propane tanks would be another option. They can only get so old before they have to be retired.. Not sure of the pressure capacity, but, if you only need 90 psi or something like that, it might work... I was just wondering if I could straighten out the drum and use it to store oil... Ha...

@@MarkThomas123 I'm just thinking about what might be possible. Say in a SHTF type situation and you needed some compressed air. It would probably even work with a plastic drum thinking about it. The strength comes form the concrete so you could probably even blow up a thick trash bag and pour cement over it if you could somehow get a pipe to fit on a thing like that. As long as the air doesn't get into the pores of the concrete it should work at lest for a quite a while. In the case of a plastic drum maybe a long while. It's hard to say though, probably no one has ever done it.

@@herbertbell9438 Put some fiber and reinforcement wire in your concrete, just for safe keeping.. Might even be able to pour a form of some type, leave a square hole in one end of the concrete form, coat the inside with an Epoxy to seal it, and use two metal plates inside and out for your bulkhead and use some silicone or maybe better some construction adhesive to seal around the metal plates.. Weld around your air fitting, cut the bolt heads off you used to pull the plates together and weld those up solid one at a time.. The weld shrinkage would pull it back tight I would think... Then, burry it in the ground,, just in case.. Ha...Ha... :) Or, find some boiler mechanics in your area and have them keep an eye out for a used tank for you. Could also search industrial scrap yards for a piece of steel pipe and some flat plate and build one. Probably would want to do some research on boiler thicknesses and PSI, etc, just to stay on the safe side. I think water pressure tanks might be an idea also. They run at 40-60psi, so, are probably rated at 60 to 90, but, might surprise you, but, error on the side of caution. If something you build ever bursts, there is likely going to be flying debris, or, at the least, some portion that splits and flies away, likely with sharp edges and speed, which if you were standing close could give you something to worry about for a long while... You can always find old air compressors with blown heads or motors, and just the tank is left at junk yards, etc.. Especially if you take a Card of some sort to the local junkyard and tell them to keep an eye out and call you when they have something. A $20 tip should go a long way in finding something much better than what you are contemplating, and probably less expensive in the long run.. I wanted some different size coil springs to make some chisels, tools, etc, around my shop.. I told the guy what I wanted and the NEXT Day,, he called me and had more than I thought I would find searching myself in 2-3 months.. They know what they have out there.. I think I gave the guy $40 and had just about every size I could think of. Anything from Bicycle seat springs, to Motor cycle shock springs, to 1-2 and 3 ton Coil Springs from some old equipment they had sitting waiting to crush.. He just took a torch out there for an hour and cut everything I needed.. Worth a shot for sure.. I can just about guarantee you, your local "Dump" who recycles has a place to deposit metal items.. If someone is on the lookout for something that will hold air for you, guaranteed within a week or two, you will have your choice... Just give them your Cell and let them send you some pictures.. Good luck with the Project..

Still working fine... I would not use the Trucks if I didn't have to.. I have them cranked all the way down to stop them from moving. They are supposed to be flexable, which is not what you want.. Just use a bolt and some other method of attaching it.. I have several comments of what I would do different, but, I have done a lot of shop grinding with it and I have another that I am about 1/2 way through building, but, always have other things to do, because, this one does what I need.. Ha.. Thanks..

Yea.. Ha... Actually two running to get the 3rd on the trailer.. Ha... But, there is always someone around interested in helping in a well thought out project.. :) Honestly, it was easy, but, I was surprised at how heavy the thing was to pull it up on there.. I had to put it in 4wd low and put some pressure on it.. Not sure how else you could do it.. Unless you figured a winch into the deal, which I have, but, not to mount on the uhaul.. Ha.. I have one mounted on a 3.5" Square tube stud that I can move around on a trailer with 4" square pockets.. Something I build to move a 3,000 lb injection mould I had to move without a forklift... Even had to build a metal skid I could drag down a gravel alley to the trailer.. Long Story!! Ha... Always getting these crazy projects they say can't be done.. Ha..Ha..

@@MarkThomas123 Know what ? I figgered it out. I’m going to buy A SPEED MOUNT WINCH adapter, Mount a $98.00 Home Depot 2,000 # Winch - Champion Brand to the Winch adapter. Then bolt the Winch adapter to an ELONGATED DROP HITCH. This way, the Car Trailer in on the 2” ball, the winch is safely mounted on the elongated drop hitch’. PROLLEM SAWLL’ D

@@tommaika9121 That would definitely do it. Sounds like a great idea.

Correct.. 17 volts is pretty high for a 12v battery. Usually 13.8 new 12.8 approx after they get a little life on them..

I understand your Theory, but, 220v 30amp, best to just plug it in before you crank it. I would not want to plug it in with the breaker on either. That would create a pretty good snap on the generator and things plugged into it. I always turn off all of the 220v breakers, and then, flip the generator breaker on to power the house Electric box. But, I know that does not put that big of a load on the generator. I usually wait at least 10 seconds, or let the generator catch up to the load before turning anything else on. Usually just a few or a second or two.. Then, I turn on my 220v Deep Well pump, but, I have the Hot water heater breaker off, which I am lucky enough to have inside.. Then, when I want to warm up the hot water heater, I do not use the water, and I turn the Electric Hot water heater on. When I hear the load release, I turn the Water heater off and use the water as I wish again. If both the Hot Water heater and Deep Well Pump come on at the same time, it either lugs the Genset down way, way too far, or kills it, or, flips the generator breaker. When I turn everything off, Generator feed breaker First, then, I turn the House Main back on, Turn the Genset off, Unplug the Genset, and I'm done until I need it again.. When I get ready to run on it again, Before I go outside, I turn the Water Heater off, then going outside, I pass by the Electrical Box, Turn the House Main Off, (Leaving Genset breaker off), Hook up Genset Cable, Crank Genset, Go back to the Box, Turn off all 220v breakers, Flip the Genset breaker feed on, let it stabilize, then flip the 220v Deep Well on, and run as long as I have to.. It's just safer to not crank the Generator unless both ends are plugged in. If I were not the only one around here who fooled with the Genset, I would disconnect both ends of the Male Cable. But, I know, no one is going to crank the Generator but me, or someone I am on the phone with cranking it for my Girlfriend, or my Girlfriend if for some reason I am not home.. But, she would call me before doing anything, because, I have not trained her. But, I have the same setup at my Mom's who is 84, and, she has called me on the phone several times, and just tells me what she is going to do as she does it, and she does fine. But, I put a 3x5" index card with the instructions anyway, because, it can be a while between her doing it herself. Never had any problems... But, if you pick up a Male to Male extension cord and don't have any respect for it,, (Gives me the Heebie Jeebies) you really have no business doing it this way. You know what I am talking about. Anything Male to Male has a potential to get you.. It's just that simple.. Just a thought on Grounding though. I have gotten bit with one hand touching something with a good pair of rubber sole boots/shoes on. I can tell you one other strange thing about Grounds. I have a 220v Deep Well Pump that is only driven by a 3 wire cable (2 hots and a ground). I never paid any attention to it, but, one day I was looking for my grounding rod by my Main Electrical box, and there was None. Only thing I can figure is, it grounds through the ground to one of the closest telephone poles, which is probably a good 50 yards from the well. So, don't discount the fact that the Earth itself is ground, and, you can get shocked when wearing rubber boots, only touching a hot with one hand. Better to be on the safe side any way you slice it.

@@MarkThomas123 Yeah, I actually do it your way. I was just pointing out that the plug can hurt you but prolly not kill you. I did one time pull the plug hot. I don't recall what I was checking. The plug is large enough that I didn't get fingers close to blades but I found a safe place to lay it down until I plugged it in again.

It seems that the more you use them, the more they grow to be honest.. We have been making Kefir every day now since I made this video. Seems like every 2-3 24 hour runs, I have enough to pull some out. I usually do it once per week because, it cuts down on the volume of finished Milk Kefir and messes up my recipes that I mix up with them. I use more grains now than when I started too.. In the picture at 0:33 in the video, I probably use that much(Half of it, or just one side) in a quart jar daily. when it gets doubled, (The size it is now), it is too much, and I go ahead and pull them out and drop them in another jar and put them in the refrigerator. When I get a full quart of them, I will rinse them, put them in a big bowl, sprinkle powdered milk over them and shake them around a bit. Then, pour them through a collendar, shake out as much powdered milk as I can and put them in a zip lock, and freeze them. I have pulled some out several times and started them just to make sure they work, and have given them to friends.. The first batch is a little slow, doesn't seem like it is going to finish, 2nd run in 24 hours does better, by the 3rd run, they work like they did before I froze them, so, freezing does not hurt them at all.. And, I have left them in the refrigerator, almost a full quart of them with just 3-4 oz of milk, so, mostly grains, and I have kept them in there for 4-5 months and started a jar or two just to see. They taste a little strange/strong after being in the super strong kefir until you run them 3-4 times, then, they are like they were before I stored them.. As far as Kombucha.. I have put scobies in ziplocks and let them sit on a shelf for 6 months in the same kombucha liquid and they were fine, so, you can bet you can refrigerate or freeze them also.. Good Luck with it.. You can't do your gut microbiome much better than Fermented Milk/water Kefir and/or Kombucha, but, throw in some fermented veggies and home made Saurkraut and your gut can even hold up to McDonalds and some junk food. Ha.>ha.. Careful with the Bleached white sugar. I have destroyed a whole batch of starters using white sugar,,, not paying attention, on the phone, etc.. Cheers!! And, if you made it this far, and are willing to and see the value in drinking Bacteria and Yeasts, start looking into Urotherapy.. I think it is God's greatest Gift to Mankind. Had an 83 year old man, had 2 sores on his foot. Had been seeing wound care once per week for 8+ months and, they were really no better. I told him, I can show you a quick/easy way to fix that, but, you have to do what I tell you to do, and, you have to trust me, and if we get rid of it in a couple of days, you have to promise NOT to tell the Nurses what you did.. Just say, someone came and Prayed with you, which I will do before I leave, so, you will be telling the truth. He put one application on that day, the next day I thought his house was on fire when he called me,, I said, I told you, now, once more,,, and he did it again, now, I told him to take 5 drops, and tomorrow 10 drops, and, by the time the nurse came back, she could hardly tell where the wound was. He kept taking it, 10 drops 2x per day, then 10 then 20 per day, etc.. His wife said his mind was clearer. He is finally getting thirsty and actually drinking like he should, has more energy, mind is clear. Back to the Jokester he once was, etc.. He is a stroke victim since about 3 years ago. His wife thinks he is going to be walking again soon. But, with today's Medical System, you just can't share it with them.. They can't use it and they wouldn't if they could. It costs nothing, and, it fixes the problem at the source and Doctors loose customers like that.. Read the book on the top right of the page first. urotherapyresearch.com/resources/ The Water of Life.. It should get you going. They have been doing this for Thousands of years. I wonder if you read the Greek and Hebrew texts of the Bible, before the Non-Rightous King James Translated the Bible, if it wasn't spoken about often in the Original texts... But, just to let you know it's not uncommon or out of style, here is an article someone did on it in 2015. qz.com/india/401725/indias-bizarre-and-occasionally-horrifying-obsession-with-urine Don't say someone never gave you anything great!! :) Cheers!

That would be a pretty expensive idea.. Ha.. Just sharing it because, the damn sockets are so expensive, and you don't really need one. There are always more than a single way to skin the cat.. Ha.. But, if you want to patent it, go right ahead. If you market it, and make millions, send a little thank you.. :) Cheers!

Not when that it is made/marketed for...

Yes. And a Q follower, so, I've been down just about every rabbit hole you can imagine in the last 5-6 years. And, I have something you want.. I work all night, and rest during the day right now. Are you still up?

If you have telegram, the transcript to the Raland Brunson video is here: t.me/c/1870201172/99

@@MarkThomas123 Thank you so much.

@@janetallaire Did you get it? You have to have telegram, or you won't get the whole thing. It's pretty long.

Yes. If you look closely in the video at the bottom burn chamber and riser connection point, you will only see two tack welds. I had that Riser as an extra piece of scrap(cut off). They said it would not work, but, based on my experience I knew it would.. But, it is a bit finiky. Requires good dry wood etc.. But, yes, if you look at the final version, you will see it is taller. But, I built it based on the height of the top burner comfort, not on draw needs. I knew I would have more than enough with +12 inches. Final temps are 850 to 1000 deg on the bottom and 450-550 on top, with the risers at about 140 to 160. I was making this for cooking Beans and Rice and keeping coffee warm.. A complete success.. The others I have are for fast boiling of water for purification, etc.. I have a family of them. Ha.. Does all I need for sure for a family of 4.. :)

Yea.. It's a game of give and take.. Keeping it behind the tow vehicle is the key. I always cross my safety chains under the tongue. That way, if it falls off, it is in a chain cradle and stays behind the truck. You can break and it will slide forward and,, if they are snug, and not too loose, should bind up before the trailer gets too far under the truck, hopefully keep the tongue off of the ground and you can brake it to a stop.. But, if the damn thing goes crazy, sometimes it is best to let it go.. Hopefully off through the woods and not into oncoming traffic.. If you are not cris crossing your safety chains,,, start today.. Also, no looser than the chains need to be to let you turn all the way left and all the way right.. Any safety chain of a reasonable size should hold 8k lbs, if it is not whipping around back there.. I learned my lesson pulling a 20' aluminum boat and had loose safety chains,, too long.. It went side to side and I was damn glad when it ripped the tongue off and went down the hill.. It was a new truck and I was having a pretty hard time holding it on the road.. Never again my friend..Ha..Never again!! Good Luck!! BTW.. The bolt in the tongue on the trailer just snapped off to start the whole ordeal.. Wasn't my boat, but, I hooked it up and didn't see anything wrong with it... It was the bolt that held the nut that pulls the lip up under the ball that broke.. I had just crossed a little bridge on the road which bounced the truck/trailer up and down a bit.. Nothing drastic.. Which,, thinking about it now, the tongue weight had to be a little light too.. Hmm..