#05 2009 silverado blower fan replacement

I will show you how to replace the blower fan.
I hope the video helps you.
Additional help at.
static.nhtsa.gov/odi/tsbs/201...
⭐️⭐️⭐️ SUBSCRIBE TO DIY REPAIR CORNER NOW ⭐️⭐️⭐️
youtube.com/@diyrepaircorner?...

[@bad_influencer5888]

Thanks, I went to the ac repair shop and gave me an appointment to come back in a couple of days.
When I did go back, they forgot about my appointment.
So I went ahead and ordered the blower from Amazon, and decided to check out some vids.
This vid was the most straightforward, and short.
I did this on my 2008 Avalanche, and ac is blowing penguins 🥶

[@diyrepaircorner]

Glad it helped 👍👍

[@lHasRage]

Glad I am not the only one struggling to get the new blower motor assembly back in.

[@jwood8590]

Thank you for sharing this video! I was able to accomplish this task with little help from my hubby. A little tricky getting the motor out and in, but figured it out. You have to align the part into the slot in the back, using a flashlight, doing it upside down to make it fit and click into place. What a sigh of relief, and whala have air flowing again! I couldnt live without my defroster especially. I had to get this fixed, better now in the summer, than quitting in the winter months of Maine. Very helpful! :)

[@GoldcoinDigger]

J Wood
Glad it helped 👍

[@jeremysutherland295]

Super easy job. Thanks for the help. These vids are always so useful. Like pulling back that foam....honestly was the most helpful to me. Also I tore it out went to the parts store and sized it up as there's the 3 flavor variety on this model. Thanks again

[@scottthiele2916]

After having the same problem with getting the wrong part 2 times, i finally just ordered the right one online. A week of using my ice scraper to bang on the old fan to keep it running and 5 mins of work when it arrived, saved me 120 dollar labor bill at the shop. Thanks for taking the time to post this my friend!

[@yanceycuellar5510]

1
0 mins

[@astroadventures3559]

I noticed tapping it down there with kicking it back on for me I just didn't know quite where the blower motor was. As soon as I started watching the video and saw where you had your blower motor I went down there and knock it with the back of my drill and it kicked right on. Now I know that's what it is you just saved me a lot of money at the repair shop. Thank you so much for taking the time to make an edit this video.

[@diyrepaircorner]

Glad it helped

[@juantootri2721]

My mannn!! I was about to break all kinds of stuff and duck tape the new blower back in place! Thank you so much. 38°F windy in oklahoma and gotta take a 2hr road trip.🥶

[@williamchevalier2224]

Thanks, it's prolly the easiest mechanic project

[@claytonlongworth1145]

Every part that gave you grief would happen to me. Including getting the wrong motor. Now I know what to expect. Thank you!

[@diyrepaircorner]

Glad it helped. 👍👍

[@troyyoung953]

The best video on this. So easy, thank you

[@diyrepaircorner]

Thanks

[@philliptetreault9311]

Thanks for the video. Saved me a lot of time. Much appreciated!

[@diyrepaircorner]

Glad it helped 👍

[@Cadenas24]

Thank you, it really saved me Big time ❤️

[@diyrepaircorner]

Glad it helped

[@tysongerhold7478]

Speed the video on the parts where you start cursing to not hear it is priceless 🤣

[@jhh243]

Thank you very much brother!

[@diyrepaircorner]

Glad it helped

[@stevenelson4509]

Thank you for sharing! This video will help me greatly

[@diyrepaircorner]

Glad to help you

[@micahgreenlee6694]

Thanks bud you made it easy I'm definitely not a macnic and it was simple Thanks again

[@diyrepaircorner]

Glad it helped 👍

[@yeshuwan-chupcowakenbear1626]

Thanks much appreciated

[@GoldcoinDigger]

Glad it helped

[@calitalia2000]

If it's just making some racket but still working, you can spray some love into the small hole in the black plastic. Should take care of your issue. I used lithium grease into it with the tube that every can of lube has, and it took care of my issue. No need to replace it.

[@diyrepaircorner]

Glad that worked for you 👍

[@montyrackley8861]

Good job, but isn't a good ideai to also change resistor when changing motor?

[@diyrepaircorner]

Probably would be a good idea to

[@412manyshotspittsburgh3]

Did this take 3 hours like they are telling it will take at the shop?

[@ericramos5166]

Any help on resistor

[@diyrepaircorner]

Sorry I haven’t replaced one.

[@user-it2sq6cs7g]

How do you know it is the fan and not a switch or something

[@diyrepaircorner]

The motor keeps cutting in and out. You tap the motor and it starts up again. This means motors done.

[@tysongerhold7478]

I got a kick out of you speeding up the video to drown out you cursing at the cover with that small ratchet 🤣

[@user-fe5js6uv3o]

شغلك ممتاز بس تصويرك سيى

[@WoodPile81]

You spent over half the video taking the plastic cover off....smh

[@shanerushing2574]

Im fat so i already know im gonna have a time. Plus i got that big ass center console so its gonna be a pain getting that last one out he took off

[@Hugeroost]

Call Kyle, 15 second job for him