I Spent $500 on Tools from TEMU so You Didn't Have To!

Sdílet
Vložit
  • čas přidán 9. 06. 2024
  • TEMU deals have been all the rage here lately so I decided to buy some tools to see if they are worth it. I spent $500 and discovered these TEMU tools to avoid.
    Videos To Watch Next
    I Actually Found GOOD TEMU Woodworking Tools for CHEAP • Cheap TEMU Woodworking...
    PLANS: www.731woodworks.com/store
    Greatest Free Gift I've Ever Received: story4.us/731Woodworks
    Recommended Better Alternative Tools
    Woodpeckers Square - amzn.to/3LzSwRW
    Better Center Punch - amzn.to/3ryS7Z5
    Better Double Stick Tape - amzn.to/3RBL2l7
    Better Router Radius Template - amzn.to/3tdKWGw
    Kreg Router Radius Template - amzn.to/3PzAPD5
    Incra Ruler - amzn.to/3t4ufgl
    Knipex Pliers - amzn.to/46JUSWL
    Suizan Flush Trim Saw - amzn.to/46ts58n
    Kreg Pocket Hole Clamp - amzn.to/3Rzzsaa
    Better Moisture Meter - amzn.to/3PSTScY
    Pica Pencil - amzn.to/3ZB7nBA
    Graphgear Pentell Pencil - amzn.to/46uWeUO
    TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
    REAL Gripper - amzn.to/3EYs1BO
    SawSet - amzn.to/3tdK7NW
    T Bevel - amzn.to/46r3EIN
    iGaging Caliper - lddy.no/1i0hy
    Mitutoyo Calipber - amzn.to/3ETQIiU
    TEMU TOOLS - Buy These Tools at Your Own Risk (Better Alternate Tools Below This List) These are TEMU affiliate links. If you don't want to use these links, just search for the product name on Temu.com. Affiliate links help support my channel and allow me to buy tools without taking on sponsors. My goal is to keep this channel as sponsor free as much as possible.
    Flat TEMU Square - temuaffiliateprogram.pxf.io/Y...
    Red TEMU Square - temuaffiliateprogram.pxf.io/L...
    Red Shoulder Square Thing - temuaffiliateprogram.pxf.io/9...
    Super Sharp Center Punch - temuaffiliateprogram.pxf.io/0...
    Crappy Circle Drawing Thing - temuaffiliateprogram.pxf.io/2...
    Sticky Double Stick Tape - temuaffiliateprogram.pxf.io/5...
    Plastic Router Radius Template - temuaffiliateprogram.pxf.io/e...
    Fake Incra Ruler - temuaffiliateprogram.pxf.io/E...
    Pliers Knipex Knockoffs - temuaffiliateprogram.pxf.io/y...
    Mini-Multi Tool - temuaffiliateprogram.pxf.io/6...
    TEMU Flush Trim Saw - temuaffiliateprogram.pxf.io/e...
    TEMU Right Angle Pocket Hole Clamp - temuaffiliateprogram.pxf.io/Q...
    TEMU Moisture Meter - temuaffiliateprogram.pxf.io/k...
    Fake Pica Pencil - temuaffiliateprogram.pxf.io/r...
    Fake GRIPPER - temuaffiliateprogram.pxf.io/Q...
    Dumb Angle Finder thing - temuaffiliateprogram.pxf.io/V...
    TEMU Caliper - temuaffiliateprogram.pxf.io/D...
    📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
    Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Add the word VIDEOS to the text to be alerted when I post new content.
    The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommen...
    Other Tools/Equipment I Use and Recommend:
    Ariat boots I wear (super comfortable) - ariat.dkkdet.net/9gJ5BY
    Table Saw I Use - amzn.to/44XhPF5
    Miter Saw I Use - amzn.to/3OqDIWi
    Table Saw Blade I'm Using - shrsl.com/3xv5i
    Toolbox in Background - homedepot.sjv.io/x9B2xy
    Tool Organization Wall over Miter Station - amzn.to/45cQUFa
    Digital CZcams Sign - amzn.to/3GL2a2e
    Work clothes I wear = TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
    Camera Gear I Use - kit.co/731Woodworks/camera-ge...
    Computer Equipment I Use for Editing - kit.co/731Woodworks/731-woodw...
    🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
    Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks CZcams channel www.731woodworks.com/youtubed...
    Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. This helps support my channel so I can continue to make content like this.
    0:00 TEMU Haul
    0:38 Temu Woodworking Squares
    2:35 Temu Ruler vs Incra Ruler
    3:31 Temu Set Up Gauge
    4:04 Temu Angle Gauge
    4:54 Temu Tenon Caliper
    5:26 Temu Router Radius Gauges
    5:39 Temu Got Me on This One
    6:24 Temu Double Stick Woodworking Tape
    7:18 Temu Wood Moisture Meter
    8:38 Temu Pliers vs Knipex
    9:28 Temu Flush Trim Saw vs Suizan
    10:10 Temu Digital Caliper
    10:47 Temu Knockoffs
    12:02 Temu Pocket Hole Clamp vs Kreg
    12:40 Temu Center Punch
    13:03 Pica Pencil vs Temu Knockoff
  • Jak na to + styl

Komentáře • 292

  • @731Woodworks
    @731Woodworks  Před 8 měsíci +3

    Watch Next - Hidden Gems I Found at TEMU - czcams.com/video/cGexUfCMAT0/video.html
    Recommended Better Alternative Tools
    Woodpeckers Square - amzn.to/3LzSwRW
    Better Center Punch - amzn.to/3ryS7Z5
    Better Double Stick Tape - amzn.to/3RBL2l7
    Better Router Radius Template - amzn.to/3tdKWGw
    Kreg Router Radius Template - amzn.to/3PzAPD5
    Incra Ruler - amzn.to/3t4ufgl
    Knipex Pliers - amzn.to/46JUSWL
    Suizan Flus Trim Saw - amzn.to/46ts58n
    Kreg Pocket Hole Clamp - amzn.to/3Rzzsaa
    Better Moisture Meter - amzn.to/3PSTScY
    Pica Pencil - amzn.to/3ZB7nBA
    Graphgear Pentell Pencil - amzn.to/46uWeUO
    TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
    REAL Gripper - amzn.to/3EYs1BO
    SawSet - amzn.to/3tdK7NW
    T Bevel - amzn.to/46r3EIN
    iGaging Caliper - lddy.no/1i0hy
    Mitutoyo Calipber - amzn.to/3ETQIiU
    TEMU TOOLS - Buy These Tools at Your Own Risk (Better Alternate Tools Above) Below are TEMU affiliate links. If you don't want to use these links, just search for the product name on Temu dot com. Affiliate links help support my channel and allow me to buy tools without taking on sponsors. My goal is to keep this channel as sponsor free as much as possible.
    Flat TEMU Square - temuaffiliateprogram.pxf.io/Y9jYVK
    Red TEMU Square - temuaffiliateprogram.pxf.io/LX5103
    Red Shoulder Square Thing - temuaffiliateprogram.pxf.io/9g9ZVY
    Super Sharp Center Punch - temuaffiliateprogram.pxf.io/0Zn5ZL
    Crappy Circle Drawing Thing - temuaffiliateprogram.pxf.io/21geRM
    Sticky Double Stick Tape - temuaffiliateprogram.pxf.io/5gqGko
    Plastic Router Radius Template - temuaffiliateprogram.pxf.io/eKQ2n6
    Fake Incra Ruler - temuaffiliateprogram.pxf.io/EKxPq9
    Pliers Knipex Knockoffs - temuaffiliateprogram.pxf.io/y2Ovqy
    Mini-Multi Tool - temuaffiliateprogram.pxf.io/6ex1e3
    TEMU Flush Trim Saw - temuaffiliateprogram.pxf.io/eKQ2KZ
    TEMU Right Angle Pocket Hole Clamp - temuaffiliateprogram.pxf.io/QyGXjz
    TEMU Moisture Meter - temuaffiliateprogram.pxf.io/k0kvOv
    Fake Pica Pencil - temuaffiliateprogram.pxf.io/rQ0yad
    Fake GRIPPER - temuaffiliateprogram.pxf.io/QyGXY9
    Dumb Angle Finder thing - temuaffiliateprogram.pxf.io/VmQKxJ
    TEMU Caliper - temuaffiliateprogram.pxf.io/DKqmKq
    📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text!
    🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks
    (If you use one of these Amazon and other affiliate links, I may receive a commission)
    Some other useful links:
    Daily Tool Deals on my website: www.731woodworks.com/tool-deals
    Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
    Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
    Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

    • @LollipopWoodworks
      @LollipopWoodworks Před 8 měsíci +1

      shame on you for sending money to a company that uses slave labor to produce stolen ideas, just for youtube views.

  • @FixItFrench
    @FixItFrench Před 8 měsíci +17

    I’m a full-time mailman, and Temu is taking over everything lol

  • @Trapper_Creek_2024
    @Trapper_Creek_2024 Před 8 měsíci +5

    When it comes to buying underwear, you get what you pay for. When it comes to buying a luxury SUV, you get what you pay for. When it comes to buying tools, you get what you pay for.
    You’re always going to have a better tool if you buy a higher quality tool. Plus, a higher quality tool will always last longer than a cheap knock-off. The proof of that is almost all of us a couple of tools that Grandpa purchased back in the early 1930’s … the point is that we still have them, and they still work as they are supposed to.
    Thank for the video, Matt!

  • @schwemdog1
    @schwemdog1 Před 8 měsíci +9

    the first piece in your video you screw together needs to have a square held to it as you tighten the screws. I did it that way and mine is perfectly square.

  • @Dragonited
    @Dragonited Před 8 měsíci +14

    The biggest issue with Temu is not poor quality but the data harvesting and security problem with their app. They had a news segment about it recently.

    • @brendasmith1533
      @brendasmith1533 Před 8 měsíci +1

      There are reports from businesses saying Temu has knockoffs of their products but with much lower quality. And Matt showed us one. I take those businesses' advice and won't buy from Temu.

    • @rnorwood2815
      @rnorwood2815 Před 8 měsíci +2

      I watched that segment on youtube and just like others who commented on it I have given the same information to Walmart, Amazon, Bass Pro, and every other online vendor that I shop from. You take chances no matter if the company is foreign or domestic.

  • @ZealousDragon
    @ZealousDragon Před 8 měsíci

    Great video!!! Looking forward to the next. Thank you for investing so much back in the channel. Keeps me coming back. Keep the awesome videos coming..

  • @jimrosson6702
    @jimrosson6702 Před 8 měsíci +1

    Great video Matt thanks for doing this and showing the junk they are selling. I know there’s a few good things on there but not many can wait to see what you got that’s good

  • @johnmack537
    @johnmack537 Před 8 měsíci +16

    Folks need to understand that within Temu’s offerings for woodworking tools, they’re not “knockoffs” of what’s being sold on Amazon, many are the SAME tool; Temu just bypasses the middleman importers.

    • @petersoumanis5494
      @petersoumanis5494 Před 8 měsíci +1

      So, they're just ripping off other people's IP.

    • @johnmack537
      @johnmack537 Před 8 měsíci

      @@petersoumanis5494 If eliminating the middleman and sourcing directly from the manufacturer is “ripping off” that middleman, so be it.

    • @brendasmith1533
      @brendasmith1533 Před 8 měsíci +1

      There has been reports of Temu using knockoffs and harming other businesses that put out good quality. Just look at the comparison Matt showed and how similar they look but the quality was not there.

    • @johnmack537
      @johnmack537 Před 8 měsíci

      @@brendasmith1533 As I said, MANY are the same product selling on Amazon, but NOT all. There is unquestionably a lot of crap on Temu, but there’s crap on Amazon as well. Caveat emptor.

    • @shellianne5767
      @shellianne5767 Před 7 měsíci

      That's true. Many of Amazon's offerings are from China.

  • @MADMANmakes
    @MADMANmakes Před 8 měsíci +16

    Are you sure your Woodpecker square was actually...square? It seems weird that most of the ones you compared to it were "off" in the same manner. I have bought a few woodpecker clones from Temu and my experience was completely different. They were ALL perfectly square! The only issue I had was the measurement markings were consistently off a little.

    • @731Woodworks
      @731Woodworks  Před 8 měsíci +1

      Yeah, I'm sure they are square. I think it's just a mixed bag on what you'll get from TEMU.

    • @Meyerwoodworks
      @Meyerwoodworks Před 8 měsíci +1

      I don't even own WP's tools, but they mill them and use optical data/CMM to ensure precision. Safe to say WP's are VERY square. Tolerence is like 0.001" over 30" or something crazy.

    • @gillicous11
      @gillicous11 Před 8 měsíci +6

      That is not how to even check to see if a square is square
      If that is the only square that you have how will you check it

    • @snowsurfr
      @snowsurfr Před 8 měsíci +1

      @@gillicous11do enlightenment me. How does one properly check for square?

    • @gerardbroussard6336
      @gerardbroussard6336 Před 8 měsíci +1

      I’ve had a very good experience with squares and a miter gauge from Banggood, a more reputable source from China.

  • @jwilson115
    @jwilson115 Před 8 měsíci +8

    I purchased the knockoff grr ripper on sale for 22 bucks on temu. I absolutely love it. As a hobbyist I can't justify the higher price of the grr ripper. To each their own i guess.

  • @brendasmith1533
    @brendasmith1533 Před 8 měsíci +2

    Loved this video and can't wait for the next one, Matt. Absolutely no reason for you to apologize. You clearly stated there were some hidden gems in the beginning of the video. Your video was based off your opinions and you showed us why you had those opinions. I appreciate you for your time and effort, and the quality of your videos. You bring a lot of expert value to us for free. Don't change!

  • @motor.mental
    @motor.mental Před 8 měsíci +1

    You make my day so much better when i can watch your videos keep up the good work

  • @nickvaughan4069
    @nickvaughan4069 Před 8 měsíci +2

    Thank you so much for this video,I was about to try Temu for the square and ruler's and well as my late Father always said 9times out of 10 you only get what you pay more for,and you have just proved it 👍💯

    • @danielcedar2699
      @danielcedar2699 Před 8 měsíci

      I bought several of the things he showed, like the shoulder square, and they have been dead on. The iris tool was horrible, and some of the items were smaller than what you think they are. Overall though, I definitely will keep buying temu

  • @user-nx3zk5qi8t
    @user-nx3zk5qi8t Před 8 měsíci +5

    I’ve gotten some useful stuff from them. Mainly coat hooks, cutting board feet, the closest thing to a tool was a gauge to check the blade and fence to the miter slots. I was actually impressed with the quality of it. I always wanted one but couldn’t bring myself to buy one at those prices. Some have actually come down since but either way, I probably not going to buy any tools but they do have some decent odds and ends to complete projects

    • @ajames7139
      @ajames7139 Před 3 měsíci

      I guess they do have decent odd’s and ends. But you have to go through a whole lot of garbage before you find anything decent. This is the new age “wish”
      You maybe might find something usual every now and then, but generally speaking, all junk.

  • @danielparker6102
    @danielparker6102 Před 8 měsíci

    Which moisture meter would you recommend please? Would you please check out the Temu Corner clamps. I would like to know what you think about them.

  • @richm.1583
    @richm.1583 Před 7 měsíci

    If already ask, I apologize! Will the colored lead refills fit into the Pica Pencils? Thank You for your time and videos.

  • @garymiller5937
    @garymiller5937 Před 8 měsíci +1

    Thanks for the reviews Matt. Most of us would rather not waste our money.😊😊 I certainly appreciate it.

    • @brendasmith1533
      @brendasmith1533 Před 8 měsíci

      Bingo! Definitely appreciate Matt and his opinions.

  • @brentfowler2317
    @brentfowler2317 Před 8 měsíci

    Your awesome Matt!! Thanks for the great content. Ands I almost fell for Temu's woodworking crap. But I ended up not ordering.. and after seeing this video I don't regret my decision at all. Anyhow nice work. Can't wait to see what's next.

  • @rnorwood2815
    @rnorwood2815 Před 8 měsíci +2

    I completely agree with you in regard to the inaccurate tools that would cause you to have errors in your work however where I disagree is on items like the Gripper. I actually have 2 of them and I love them, they greatly increase my safety using a table saw. For someone that wants to get into woodworking but can't afford the higher end versions I would still encourage them to get one of those items because I would rather they have it and be safe than not buy it because they copied someone else. Some people don't have the budget to buy the Festools, Woodpeckers, or Sawstops and that should not stop them from being able to enjoy woodworking.

  • @nathan1sixteen
    @nathan1sixteen Před 8 měsíci +2

    This may be a dumb question, but did you check to make sure your woodpecker squares are square before comparing??? I mean, they may be “square” to one another, but that doesn’t mean they are actually square. You’d need to get a precision instrument to verify squareness. Maybe the woodpeckers are all off by half a degree

  • @norm5785
    @norm5785 Před 8 měsíci +1

    Thank you for sharing this video. I am sure there is some things worth it from TEMU. They have so much available, but I just do not feel comfortable ordering from them. I was given a couple rolls of the same tape. You are absolutely correct, in removing it is a very hard chose. I had to make some repetitive cuts on my Mitre saw that was outside of the rulers limits. I used it to secure a stop block. Went to remove the stop block and it removed a chunk of the melamine top. Just to see if it would work, I used it to secure a 20x20 metal babinet to the wall. Full strip from side to side, across the back, top and bottom to a 1x4. To see if it would hold the cabinet to the wall. It has not come loose yet. Is did also put 4 screws in slots, to catch it in case it did. But had not come loose yet. This stuff might be stronger than Medical tape.
    Everyone stay safe, happy 😊😊😊 and healthy. From Henrico County Virginia

  • @donbrunodelamancha1927
    @donbrunodelamancha1927 Před 8 měsíci +6

    731 Matt, thank you for graciously, taking the bullet for us. I never would’ve done it. But you were very gracious to go ahead and do the research and do your due diligence and pointing out the screamingly obvious if there was no way this would be a source of quality tools, or ethical tools.

    • @stevengreen4316
      @stevengreen4316 Před 8 měsíci +1

      Respect to you sir. Thank you for reply👍

  • @paulmannix1760
    @paulmannix1760 Před 8 měsíci

    Thanks Matt, been tempted by Temu’s tool offerings. I use the “beer principle”, if you’re going to buy disposable items & buy them often you need to find the best value, like who’s got the best price for your favourite beer. If you only buy it once (or not very often) then buy quality, you’ll be happier in the long run.
    I did buy some drawer handles from Temu & now I get bombarded with special offers!

  • @rickgibson8220
    @rickgibson8220 Před 8 měsíci +1

    Looking forward to the Temu gems

  • @julianolivos9378
    @julianolivos9378 Před 8 měsíci

    Question, had you ever used Bora tracks for circular saws?.

  • @hampusbp1414
    @hampusbp1414 Před 3 měsíci

    9:20 Its a splitring plier, mainly used for fishing, to change hooks etc.

  • @keithspinner5970
    @keithspinner5970 Před 8 měsíci

    Great video Matt! Really funny at 150% replay!

  • @troywuestefeld2893
    @troywuestefeld2893 Před 3 měsíci

    I have a super small area to do some woodworking so I have to be very selective on what equipment I buy. I need things that serve more than one purpose. Have any suggestions??

  • @yoseflugashi9820
    @yoseflugashi9820 Před 8 měsíci

    Thank you for this video. On the Grrrriper, what are your thoughts on the Milescraft Grabber pro?

  • @draco4444
    @draco4444 Před 8 měsíci

    Great Video Matt. Only thing i would have a question about is the Digital Caliper. While I use a Mitutoyo for work at times, and I calibrate them for customers, for my personal woodshop, I use an inexpensive one from Harbor Freight. I calibrated it using accepted accredited practices, it was just as accurate from .001 inches to 6 inches. I won't say all inexpensive Digital Calipers are as accurate, but a good comparison would be to get a battery and calibrated blocks and measure it. Biggest difference I found though was the battery life. The Mitutoyo battery lasts a long time. The inexpensive, ones you need to remove the battery or when you go and use it again a few weeks later, its dead.
    Looking forward to the other video.

  • @joshuabray37
    @joshuabray37 Před 6 měsíci +1

    Oh man, I wish I'd known about the pocket hole clamp (or what ever it's called). I REALLY could have used one of those this weekend. My usual setup wasn't going to work for the situation I had this weekend. I made it work, but having one of these clamps would have solved the problem... I guess I'll add that to my Christmas list.....

  • @Danko88
    @Danko88 Před 8 měsíci

    love my I-gaging caliper use it allot, almost every day very nice.

  • @BrazaFreek33
    @BrazaFreek33 Před 8 měsíci +1

    I only just heard about Temu and I’m just about to get into woodworking. I was going to try and use Temu to get some starter tools that wouldn’t break the bank so I really appreciate this video! I don’t like to buy knockoffs but until I can afford the American made, it’s the only option. Looking forward to the hidden gems!

    • @privateprivate31337
      @privateprivate31337 Před 8 měsíci

      I bought a bunch recently off Wish and so far they all work really well and I have zero issues. Best of all, it was all just under $50. Just don't buy a power drill and expect it to have any torque ;)

  • @_wardavewoodworks
    @_wardavewoodworks Před 8 měsíci +4

    A Florida journalist uncovered that the TEMU ap drops spyware on your devises. I have not and will not download their ap no mater how enticing they make their pricing. I support our US companies.

  • @michaelwillson6847
    @michaelwillson6847 Před 8 měsíci

    Good video Matt. Agree with most apart from the pencil. I have one these granted was an Amazon but was still very cheap never had issue with it. I have bought few things from temu. There resin moulds are actually pretty good and cheap future video! 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

  • @NapKingCole84
    @NapKingCole84 Před 8 měsíci

    I've bought a few things from them. I try to stick to things that are hard to screw up: some bulk sanding discs, triangle stands for staining, or simple tools like a cheap spoke shave. That worked out ok for me. Oh and I have this weird mortising router jig coming, we'll see if that's a total waste or not lol

  • @InspiredCraftsman
    @InspiredCraftsman Před 8 měsíci

    Another good pencil is the pica fine. I'm running white lead for fabric in mine. Works great with dark woods.

  • @adamc3474
    @adamc3474 Před 8 měsíci +3

    I have a lot of different hobbies, so I have a lot of tools. I started with less expensive tools to get started. If you don't know if you are going to like a new hobby, then it makes sense to go cheap to start then upgrade later. However, from what I've seen even before this video, Temu is not the place to buy tools no matter what. Yes, they might have a gem stuck in there but that is like going to the casino. You might get lucky 1 time and have a winning hand, but the house is going to win the other 99 times. In my opinion it's not worth it. Keep making and stay awesome.

  • @PreparationH67
    @PreparationH67 Před 8 měsíci +2

    I seem to have gotten luckier with one of those shoulder squares. Had some good results with a square that makes center lines on square or round pieces. The circle things nice when it works but I had the glue holding the case together fail resulting in me having to rebuilt the thing and glue it back together which worked out but it was a very annoying and fiddly process even if you put aside getting a nice finger cut in the process. I suspect the glue holding the case failed on yours too causing the blades to slip out of the tracks. Also had good results with the really cheap plastic caliper. Accurate and I can keep it out on the bench without worrying about my nice one getting damaged.

  • @jameslangston7642
    @jameslangston7642 Před 8 měsíci

    Mr. Outlaw You Da Man thank you for your efforts in showing us these products and giving your opinion !!!

  • @GrantButler
    @GrantButler Před 8 měsíci

    9:41 spotted your Milwaukee Fastback, I love mine, I use it more than I thought I would.

  • @matolittleelkwells5377
    @matolittleelkwells5377 Před 6 měsíci

    That folding saw would be great in a bug out bag

  • @paulhopkins1905
    @paulhopkins1905 Před 8 měsíci +1

    I bought a track saw square from Temu, and a miter slot bar. The track saw square is outstanding, especially for the $25 I paid for it. The miter rail is too short to be very useful on a table saw

  • @LarryDickman1
    @LarryDickman1 Před 8 měsíci +1

    I had to click on the video because I didn't know what a "Temu" was. Thought is was related to an Emu. :) BTW Starrett tools are worth the money. Ask any machinist. All my squares, rules, and micrometers are 50+ years old. Even my dial indicators and verniers.

  • @farmterminator4777
    @farmterminator4777 Před 8 měsíci +1

    I can vouch for pica pencils, mines been through some stuff (ran over by multiple tractors with 15 tonne loads, and multiple concrete drops) i’ll admit it doesn’t work as well as it should but i works

  • @SRG-Learn-Makers
    @SRG-Learn-Makers Před 8 měsíci +1

    I understand your point on the gripper, but honestly, 100$ (quick change between €) is a lot for a peace of plastic. For a hobby, I rather be safe than to be right. I think this a point that comes for all the tools, if you are a pro go ahead, it will save you money on the long run, meanwhile, if you are a hobbyist, you don't want to spend a lot in something is not making you money and also you are just trying tools, maybe is not a good fit or maybe you don't really need it. This kind of tools, despite being garbage some of the time, are a great intro that may develop into buying original tools.

  • @alaskagwen2110
    @alaskagwen2110 Před 8 měsíci

    I bought a digital caliper from Temu and ut came with the battery. It also measures heighth. Its amazing. 96% of what Ive purchased from Temu is amazing and continues to be.

  • @v3c7r0n
    @v3c7r0n Před 8 měsíci +6

    Matt, I've got to be honest, while I agree with the others about "missing the mark" to an extent, what sticks out to me the most is that it seems like about half way through you appeared to be entirely "over it"
    Now, this is not unreasonable, especially if it was garbage item after garbage item, and while I won't pretend to know the ins and outs of video production or scheduling, with all due respect, it really seems like you should have taken a break and gotten out of the shop for a bit.
    The frustration and negativity, which is exceptionally rare for your videos and while clearly valid (the circle jig that wasn't round for example) was definitely palpable. Again, I mean no disrespect to you or your editor. Maybe it's just how the footage was edited, the order each tool was placed in or maybe I just haven't had enough coffee myself (always possible) - I'm not sure.
    With that in mind, the criticism of the Micro-Jig clone is 110% valid!
    As for the tools themselves, I have a few observations:
    - Those adjustable jaw pliers appear to be clones of the Crescent or Irwin versions (which are very similar to each other) - they're a little different than the Knipex
    - The squares & protractors are not a particularly fair comparison to Woodpeckers unless it's a direct clone of a Woodpeckers tool. I think a fairer comparison would be to Empire / Swanson / Husky / Kobalt tools off the shelf from HD / Lowe's (they're much closer in price). I bought my first Woodpeckers tools based on your reviews, and I do love them but again, with respect, it's not a fair comparison between a sub $10-$20 tool and an $80+ tool
    - With calipers you have to be VERY careful where you order Mitutoyo calipers from and should only buy them from a reputable known distributor (meaning Grainger, McMaster-Carr, Fastenal, etc - a real industrial supply house who ONLY get their stock from the OEMs - definitely 100% NOT Amazon! Knock-offs ABOUND and some are VERY hard to spot if you don't know what to look for)
    - That said, for woodworking, even cheapie calipers are "good enough"... Personally I prefer the cheap ones because at $20-ish a set, you don't care as much if they fall and hit the concrete. Also, you should not leave the batteries in them as they tend to drain much faster (it's the circuit that "wakes" them up when you slide them apparently)

    • @731Woodworks
      @731Woodworks  Před 8 měsíci +1

      Thanks for the feedback. It was originally one single 28 minute video with good and bad. I split them so it wasn't so long. More info on my behind the scenes video I released earlier to my Tubafour Nation members here czcams.com/video/v9cNqCAi0Vw/video.htmlsi=Cp0Hy3Eq-kQ512SA&t=62

  • @chandresh87
    @chandresh87 Před 8 měsíci

    I too purchased quite lot of things from Temu recently. I think it's time to check how accurate they are. Thanks

  • @Ericnelson1001
    @Ericnelson1001 Před 8 měsíci

    May I ask you a question please? It is: What online drafting software do you utilize?

  • @davidbreazeale7257
    @davidbreazeale7257 Před 8 měsíci +7

    Thank you, Matt. I have thought the same as what you posted. But I have found that some things are not that bad. Dremel sanding drums are pretty good, just use a real Dremel drum. the ones that came with the Drum papers were wonky, that is the tech term. The Dremel bits I got are not that bad, with the prices being really cheap, they don't have to last as long as the Dremel branded ones. The biggest thing I found was the lack of info on descriptions. So buyer beware on getting things from them

  • @jameskirk3
    @jameskirk3 Před 8 měsíci

    5:40 you gotta lube those up with a dry lube, and theyre only good for copying something you can put inside it. They do ok for that, but you cannot use them to fabricate a circle. You must copy a circle.

  • @Matt-zt7rd
    @Matt-zt7rd Před 8 měsíci

    I have a few of the items you showed here and haven't been able to fault any of them. The squares in particular have all been spot on - I mean how hard is it to get that right? Until I start to do a lot more projects, their stuff is a great compromise. It's a lot like my Ryobi battery tools - sure Milwaukee would be nice, but for now I'd rather have 10 Ryobi tools than 3-4 Milwaukees I'd get for the same price.

  • @PJRayment
    @PJRayment Před 8 měsíci

    That digital caliper's battery looks like a LR44/A76 1.5v battery, that are commonly used for various small electronic items one might find in a home. The tool looks identical to one that I bought from Aldi some years ago, which worked quite well. At least here in Oz, they can be readily bought in supermarkets and 'big box stores' (to use an Americanism).

  • @TalzMitto
    @TalzMitto Před 5 měsíci

    I feel like the Temu flush cut is meant more as a camping saw or something

  • @BandSWoodcraft
    @BandSWoodcraft Před 8 měsíci

    😂😂😂 That butterfly pocket saw is a must have 😂😂😂

  • @bryanharness1122
    @bryanharness1122 Před 8 měsíci +1

    I'd say for most folks some of those would work. I work with metal alot and that ain't cutting it for me

  • @grimmjusten
    @grimmjusten Před 8 měsíci

    What about the Wnew 3-in-1 wood doweling jig. It was features in an episode on Hook on wood episode 42 look at that

  • @antaholics
    @antaholics Před 6 měsíci +1

    The squares I got from Temu were pretty hit or miss too, but I did get a different digital caliper as a "toss around, don't care if it breaks" one for $5-6 from Temu and it's almost dead on accurate to my $40+ iGauging. I think it's 0.02mm/0.01in off at max extension or something, which is way more accurate than I need it for.
    Other than that I actually thought the pencil was fine. It's a pencil, and it works. $20 for a plastic pencil to me is bonkers.

  • @kennethpulliam5031
    @kennethpulliam5031 Před 8 měsíci

    Fowler dial calipers are a good quality for what you pay. Their cx service is great. I bought a couple and one has a skip in the teeth. Fowler had me send it back and they replaced it. No fuss.

  • @Jimc4007
    @Jimc4007 Před 8 měsíci

    I bought that micrometer and had to go back to order the batteries. It uses a slightly odd voltage. Seems to work fine for my uses so far.
    I bought several router bits also. They will be throw aways when they start getting dull but for the price figured I would give them a try. As I find ones I really use I will head to TayTools or Bit&Bits for a more quality permanent bit.
    Doubt I'll be buying much of anything else thru them, the odds and ends I ordered were more curiosity, got about what I figured I would so I'm not going to complain.

  • @bsr8129
    @bsr8129 Před 8 měsíci

    Nice bambu in the back ground there, on the 3D printing train

  • @trokt2
    @trokt2 Před měsícem

    Great video. Very relevant to my interests. Glad I didn't buy any squares on Temu. Regarding Grr-ripper, it costs about 80-100 eur in Europe without shipping. I wish I can justify spending this much on a push block. While it's a premium product and looks amazing, I'm gonna buy a chinese one in gray or a grabber pro.

  • @wyattsutphin
    @wyattsutphin Před 8 měsíci +68

    I absolutely despise TEMU and hate that people enjoy dumping money into Chinese ripoff companies. But to each their own. I do rather enjoy these comparison videos though!

    • @mrniusi11
      @mrniusi11 Před 8 měsíci +11

      I hate people that support intellectual property laws. What you're doing is gatekeeping. You're protecting mediocre products with patents. You're saying poor people can't have access.
      Imagine if only Kreg made pocket hole jigs. We would be stuck with their mediocre design revisions and cheap plastic. I much prefer the armor tool jig.

    • @alexorhuxley
      @alexorhuxley Před 8 měsíci +14

      ⁠@@mrniusi11 Actually, companies like Temu harm poor people by manufacturing easily-breakable or functionally useless junk. Tools that require repeat purchase will often cost someone more than more durable products. Temu is just as, or more, exploitative than other companies. There’s a lot to be said about lowering the barriers to entry into a hobby or profession like woodworking, but it’s a little naive to suggest that Temu is somehow a benevolent actor here.
      Also, I have no idea what IP laws have to do with it here, since in your second paragraph you acknowledge that different companies make different versions of tools that perform the same function. IP laws have nothing to do with Temu’s cheap, non-durable products.

    • @jodilea144
      @jodilea144 Před 8 měsíci +2

      @@alexorhuxleyyou beat me to it. Well said.

    • @sabarjp
      @sabarjp Před 8 měsíci +5

      @@mrniusi11 Kreg did not invent pocket holes or pocket hole jigs, they are actually an example of taking existing concepts and improving on them.

    • @paulhopkins1905
      @paulhopkins1905 Před 8 měsíci +3

      ​@@mrniusi11So you support counterfeiting?

  • @fmzamoranod
    @fmzamoranod Před 8 měsíci

    Love your videos!! As a newbie, aspiring worker, invaluable. Thank you!
    On this video though, I wish you had also shared the “gems”. I knew most was going to be bad.
    Last, does the push block work? I know we don’t like knock offs, but that’s not the question…
    I did the same experiment, and 80% was bad stuff. The few hidden gems made it worth it because I got them under an initial offer of “buy 13, pay for 2”. But a lot was trash. What was not, was probably worth the

    • @731Woodworks
      @731Woodworks  Před 8 měsíci

      Thanks. I had originally put both the good and bad in one video but it was a nearly 30 minutes long. Full explanation I made a video to the Tubafour Nation behind the scenes explaining it here czcams.com/video/v9cNqCAi0Vw/video.htmlsi=zY7dts3gPcz0v4VR&t=62

  • @refactorear
    @refactorear Před 8 měsíci +2

    lol, the difference between objective and honest reviews and a paid ones is abyssal (we are still looking at you, Taylor).

  • @aerohard
    @aerohard Před 3 měsíci

    Damn, I remember when you could get a 30cm x 20cm CNC router on Aliexpress for $500.

  • @JohnnyUmphress
    @JohnnyUmphress Před 8 měsíci +1

    I bought a Mitutoyo caliper, which lasted about a month out of the warranty. After trash canning that pair of $150 calipers, I bought a Husky brand from the Home Depot for $39. Those lasted about 5 years. But they have a lifetime warranty. Home Depot did not hesitate to give me brand new calipers.

    • @SimonPEdwards63
      @SimonPEdwards63 Před 8 měsíci

      There are a lot of knock-off Mitutoyo tools out there and I suspect that's what you got. We have several that are still good after 20 years.

    • @JohnnyUmphress
      @JohnnyUmphress Před 8 měsíci

      @@SimonPEdwards63 I don't think W.W. Granger was selling Mitutoyo tools.

  • @deanadiaz8669
    @deanadiaz8669 Před 3 měsíci

    I used to make fun of the way you used to pronounce Temu. After seeing the Temu commercial during the SuperBowl, I realized you are the only person who pronounced it accurately. My boyfriend says I owe you an apology. So, I am sorry 😞.

  • @bigredracingdog466
    @bigredracingdog466 Před 7 měsíci

    11:09 The patent on the Gripper has expired which is why you're suddenly seeing so many very similar products. I have the Milescraft version which is excellent and much more reasonably priced. My main objection to this Temu one is that they chose to copy it right down to the color.

  • @PirateFlag7
    @PirateFlag7 Před 6 měsíci

    I love the way he says temu

  • @sefleming44
    @sefleming44 Před 8 měsíci +1

    I have heard of several people whose bank account was hacked and the common thread was temu. Also BBB has warned against the site. I’m staying away from the site buyer beware

  • @coreypacillo8204
    @coreypacillo8204 Před 8 měsíci +1

    About the Gripper copy. Why wouldn't I want to buy a complete ripoff of that for a fraction of the price? I mean, the speed square is copied by everyone (even if the quality is a downgrade at times), yet I shouldn't buy this Gripper copy because it copies the design? Seems like its a better deal to me.

  • @shawnferguson7477
    @shawnferguson7477 Před 8 měsíci +1

    • @731Woodworks
      @731Woodworks  Před 8 měsíci

      Reference square is accurate.

    • @stefanaas1455
      @stefanaas1455 Před 3 měsíci

      bla bla bla, your record is hanging.

    • @axeman33333
      @axeman33333 Před 3 měsíci

      @@731Woodworksok but you know this, how?

  • @williamchase6298
    @williamchase6298 Před 8 měsíci

    Watching as a temu ad is right under the video lol

  • @ailivac
    @ailivac Před 6 měsíci

    6:25 sounds like a good deal on carpet tape though!

  • @fins9584
    @fins9584 Před 8 měsíci +4

    Turns out, all the Temu squares were perfect, and it was the Woodpecker square he was using as reference that was out of square. :)

    • @731Woodworks
      @731Woodworks  Před 8 měsíci +1

      lol wouldn't that be something…..but sadly not true lol.

  • @markduggan3451
    @markduggan3451 Před 8 měsíci

    I've had some great things from Temu, but then I haven't had the top of the range stuff to compare it with.

  • @chrisforker7487
    @chrisforker7487 Před 8 měsíci +1

    I’d never order from them, just due to their incessant ads on the weather channel, I ended up deleting that app.

  • @officialtree5245
    @officialtree5245 Před 8 měsíci

    Neiko calipers are about 10-15 on amazon, awesome quality

  • @Tommy.461
    @Tommy.461 Před 8 měsíci

    I bought two different squares from temu and both are square. I checked them several different ways. My wife likes to get home junk through them.

  • @michaelseigel1927
    @michaelseigel1927 Před 8 měsíci

    Nice shirt swaps :D

  • @SRG-Learn-Makers
    @SRG-Learn-Makers Před 8 měsíci

    I've bought cheap tools before and do some work to make them better. That means that you need at least a reference that you can trust. I can't afford hundreds on tools but I can spend some time to improve the ones I have.

  • @randywilson4529
    @randywilson4529 Před 8 měsíci

    I have order from TEMU and also found a few jams myself, also so trash too. I see you had in your pile the “Woodworking Rounded Corner Chamfering Template Tool Quick Change R Angle Arc Right Angle Bevel Angle Electric Wood Milling Trimming Machine Model”, I was wondering if you have tried it out and can give me a honest opinion on it. I like that it is aluminum and not poly. Love watching and learning from your videos, as I just started out into woodworking as a hobby and can’t waiting to start making stuff

    • @731Woodworks
      @731Woodworks  Před 8 měsíci +1

      Aluminum ones were good. They'll be in a future video of the gems I found at Temu.

    • @randywilson4529
      @randywilson4529 Před 8 měsíci

      Can’t wait for that video 👍

  • @aidenshobbies
    @aidenshobbies Před 8 měsíci +1

    The caliper battery is most likely an LR44 battery.

    • @Jimc4007
      @Jimc4007 Před 8 měsíci

      That's it. LR44 or SR44.

  • @garyjewett6349
    @garyjewett6349 Před 7 měsíci +1

    The squares were all off by the “exact same amount.” Suggest you throw the woodpecker in the trash, where it belongs.

  • @paulhampson71
    @paulhampson71 Před 8 měsíci +1

    You talk about paying extra and getting from a US firm. I live in Europe that is not an argument that I find very convincing. Why, as a European, should I pay a massive markup for a item just because it was made in the US? The microjig is a good example, you say that the cheap chinese one is the same in almost every way, but microjig is twice the price in europe and dificult to find.

  • @RandolOlah
    @RandolOlah Před 8 měsíci

    I enjoy watching your Videos and I enjoy your livestream. Shows and the things that you build. You and missus seven thirty one have taught me a great deal and Im grateful. It is nice to be able to go buy expensive tools, i can not. I wish i could go buy al US TOOLS, but can not aford them.
    However, you do realize that most of the tools you buy off of Temu are they same tools that you buy off of Amazon and other places. I don't have the money to go to rockhart and spend hundreds of overpriced dollars for a tool I can get cheaper. I am disabled and on a supper tight budget.
    Sorry i can not aford ROCLER...

  • @Animal_House_Prints
    @Animal_House_Prints Před 6 měsíci

    I’ll take some of the rejects lol I’m just starting out

  • @user-yn6ho4gr8s
    @user-yn6ho4gr8s Před 8 měsíci +2

    I have ordered from TEMU and love the stuff I got from them

  • @user-tu6cj3fg2n
    @user-tu6cj3fg2n Před 8 měsíci

    Can I just say thank you. I have ordered from them twice and didn’t feel right. So I don’t order from them anymore . I just wonder what is our values are worth anymore.

  • @RDSWOODWORKING
    @RDSWOODWORKING Před 8 měsíci

    The thing with temu is watch your credit card lots of problems with stolen card numbers

  • @j316finewoodworking6
    @j316finewoodworking6 Před 8 měsíci +1

    Temu is simply Walmart without the middle man. I like it. Great place to buy junk and turn into treasure 😅

  • @slanwar
    @slanwar Před 8 měsíci

    I ordered a watch from Temu and I could use that watch as weapon, that was made for 8 foot tall people with arms thicker than my leg.

  • @terrybeckham8118
    @terrybeckham8118 Před 4 měsíci

    As sharp as that spring loaded center punch is, that would be good to have in the door of your car to break out your window if you got in a wreck and got trapped. But no, not as a woodworking tool

  • @ronalves9118
    @ronalves9118 Před 8 měsíci

    I guess you bought some nice aluminum to take to the scrape yard

  • @dondale68
    @dondale68 Před 7 měsíci

    As for those Knipex wannabe pliers,, Using hand tools you're always better off spending a few more dollars and getting a tool that will last for years (if you take care of it) I only buy the cheap tools as ''loaner tools'', I WILL NOT loan out my good tools!
    I bought a cheap set of calipers from Temu, had to get an SR44/LR44 battery for them. Lowe's or Home Depot doesn't have the SR44/LR44,, had to go to Walmart by their jewelry counter and found an equivalent,, '357'.

  • @andrewsherman-dadsfinances7205
    @andrewsherman-dadsfinances7205 Před 8 měsíci +1

    Interesting you don't like the 1pc tenon caliper gage. I seem to remember a while back that you really seemed to like the Kreg router height set up bars. Is it because the Kreg are just longer and that make it easier to use? Because the first thing that went through my head was that as an all in one, it'd be great.
    Also the criticism of the Gripper is interesting since the Milescraft Grabber seems never to get any hate.
    Lastly, I'm most surprised that you are a member of the Temu affiliate program if you are so against their tools. Seems weird that you criticize products from Temu, but then are signed up as an affiliate.
    Overall, I think you have a good video. I mean I detest Festool and Woodpecker tools (mainly because of cost), but I cannot deny that if the tool you're reviewing isn't square - then you can't recommend buying it. That's fair and that's honestly all anyone can ask for is actual honesty in the process.

    • @731Woodworks
      @731Woodworks  Před 8 měsíci

      Link in pinned comment on a longer explanation to what happened with this video, but short answer, it was originally a long video with good and bad products intermixed. I decided to split it into two videos. Other video comes out tomorrow.

  • @rubenlindley3490
    @rubenlindley3490 Před 8 měsíci

    They're taking all of our information... so I've heard 😂

  • @jameslinn6918
    @jameslinn6918 Před 8 měsíci

    Let's see it.