@@esaay2167 built motor for sure built by me i will have a full video on everything need to do a full engine build...and on The supercharger we will see haha its a secret 😉
@@boosteddave4603 if you start building engines let us know. . . I need to rod/piston swap mine and once in there replace all the bearings with new ones. Truck has 160k miles and still working great stock.
@@boosteddave4603 gotta admit, I like your videos. Low key on the bullshit. High energy on the things that people wanna see. Something can be learned from our friend boosted Dave if you are picking up what this man is laying down.
Whats up bro. Your vids are helping out a lot !!! Keep up the great work. Quick question. I have a fully stock lightning, if I were to slap a whipple on (2.3L) would I need to do any upgrades? Or can I just slap it right on and getting it tuned. Thank you.
I am glad I could help out bro. Bro and if u do a 2.3l u would need bigger fuel pumps and also run low boost on it bro and also a 2600maf or bigger but on a stock motor u can safely run it on low boost
You mentioned having a few Intakes there. Are you willing to sell any of them ? Or are you willing to sell the 1999/2000 Intake Assembly that you took off ? Thanks for your time...
The same thing I say there design never gets old. Ford really naild it with the svt lightning and the value keeps increasing as the tike gose by. Soon looking to get 03 or 04 cobra terminator another of my childhood dream cars
@@stevenhanna6973 them 5.8l are just something special. Specifically the performance package that comes with the extras. I like the new 2020 but there's just something I just can't maybe because it looks just the same as the gen2 coyote just upgraded bumper in my opinion. But wouldn't mind getting one for free hHa
Curious as to why y’all went with the larger supercharger.? From everything I read is that these trucks seem to benefit better with the smaller whipple.
Thanks so much for the great video! Wish I went with the Whipple. For about a year now I have the kenne belle 2.6 highly recommended by jlp. Took like 6 months to get too. Told that the 2.6kb can net up to 800rwhp. Well, that is really not the case on pump gas plus I had some pinging with the initial tune at 499rwhp. I regret having listened to them and then regret that I am told I need race gas if I want more than 500rwhp! My stock eaton drove and felt better even if there was less peak horsepower. The kenne belle has a lightswitch boost and doesnt come on smoothly like the eaton does. I was told that it has to be set up that way or the rotors can heat up, expand and seize in the case. What?? Why would that even be a thing? Eatons don't have anything like that going on. Where should I be on 93 Octane pump gas with a safe tune? I have stock cams and the built long block with cnc ported heads. I would like a solid 600hp plus (and similar torque) daily driver should not be too much to ask! So wondering if the Whipple is the way to go.
Thanks bro and how much boost are u running? Stock heads can get u more than 600. Depending on your tuner. And jlp they always go with KB because he is a supplier.. It's always better to have ported or aftermarket heads. My stock lightning swap f150 single turbo 76mm on 11lbs of boost it made around 550 or 560 whp and that's a complete stock motor on e85. But I am pushing every boundaries on my stock rods and pistons.
On 93 octane you're going to be limited to 19(ish) pounds and that will be at 10 or 12 degrees total timing. You're correct that a ported Eaton with a 10Lb lower and 2.8 upper will make better and flatter TQ than a KB will...until you get the boost above 20, then the KB will shine. With stock cams you will almost always make 100 more TQ than HP(peak). I have a 2.9 whipple...IMHO it is the best blower available right now. You def need some cams. Who did the heads?
Damn I was hoping this was gonna show how you were able to wiggle the blower on. It was basically "okay its on now" lol. Did you rtv the blower or did you use the gasket? I still appreciate the video tho.
Hey great job buddy!!! I’m doing the same swap on a Harley and I had a question for you. I was doing the inventory on my race 3.4 l whipple kit and noticed that the gasket between the supercharger body and new Inter cooler didn’t came in the kit . I noticed yours didn’t came with one neither when you were unboxing it . Those it takes a gasket there or not?
@@boosteddave4603 ok thanks. I was reading and it says I can use permatex gasket maker also. I’m gonna go pick one up right now. How’s the truck running and how much hp gains?
@@J.PROJECTZ no problem bro anytime and as of now we need to upgrade our fuel system we have twin wd450 now we need the fuel rails and lines and regulator and then add 25lbs
You know your stuff what’s your thoughts of putting a whipple on a “stock” lightning motor. I did an 2.9 on my Cobra looking at a 2.3 on my lightning. 2.3 whipple 60# injectors Plugs MAF sensor Fuel pumps Of course a good tune Any thoughts? On a stock motor
Thanks bro appreciated the feedback and on a cobra its ok because there motor cane ready for 20+lbs. But on stock lightning motor i would go with a 2.9. But ubwont be able to use the full potential because even though let's say u wana run 10lbs of boost the mass or air a whipple makes compared to a stock blow it massive l. I would upgrade the internals and go 20lbs
@@boosteddave4603 bro I screwed my self with the 2.9 cobra cars like 700hp I think I over did it, have to use Torco Accelerator that’s why I am doing a 2.3 whipple. Will a stock motor handle a 2.3 with the right bolt ons the lightning?
I have a curiosity fitment question so I own a 11th gen with the 5.4 3v engine and I have a 2.3l whipple on it can I swap out the supercharger for the 3.4l version?
hi dave I will proceed to the same installation. When you have to split the supercharge to the adapter plate. Did you install a gasket between the 2 to install it on the engine?
yes, on the intercooler adapter housing to the intake manifold, I will use the factory steel stamped gasket, but between the intercooler adapter housing and the supercharger monting flange? did you use a gasket or a sealant
@@boosteddave4603 ok thank man. I wasn't sure at first. I didn't think I had to split the supercharge from the intercooler housing. ok I think I know what gasket it is.
I would say long tube headers, lower pulley 4lb or 6lb, air intake jlt, single blade TB, 2600 maf, e85 would be a great addition some e85 fuel pumps,60 or 80lbs injectors, and if u want ported blower, alos for cooling, bigger heat exchanger, and a big ice tank
Its on 20lbs as of now and made tremendous power and Tq and ones we get the trick flow heads + they will ported more and stage 3 cam we will go max effort on it
@@boosteddave4603 it was dyno tune to 400hp with stock injectors, hey also did u used the same supercharger metal gasket or you bought a new one? The manual says if is not torn and looks good to leave it.
Sup Dave, awesome content! I have a opportunity to buy a 2004 dark shadow grey lightning for $24k its a 3 owner california truck clean title. All stock. Serviced frequently only axle and catalytic converter has been serviced. It has 127k miles tho, what do you think?
Thank u. And It's over price for the miles. And it's a 3 owner already. And have u seen u under the truck for oil leaks,rust,signs of water leaks, engine noise, unusual vibrations. I can find u one for that price same color but with 30k miles one owner.
@@lexuslove7624 if u can add me on Instagram @boostedlife294 for faster response and when u look at the truck I'll tell u what to look for.. and I've seen some spread around the us but around the 25k price range but super low miles in the 30k range and one owner. The thing is that the sonic blues and dark shadow grey are more rare to find. And ppl go up on price
Almost doubled the displacement of the 4.6 L. Very nice! I’m sure it runs great now!
Made some great power.
Awesome job man, lookin and soundin like a monster 💪
Thanks bro.. fuel system is been installed as we txt.. fore triple pump and 10n fuel lines and fuel rails
@@boosteddave4603 hell yeah man, love it! 🤘
That’s looking really good primo 🦍
Was waiting on this
More whipple content on the dyno coming soon
That thang Started right up, shout out from Houston 💪🏼😎
Appreciate bro and soon we will be in houston at royal purple 💯
heck yeah love getting notifications to your channel man! keep up the videos 💪💪
Thanks bro appreciated the support 🙏. And more whipple content coming soon on the dyno
3.4 whipple coming soon for your f150 too 👀👀
@@esaay2167 built motor for sure built by me i will have a full video on everything need to do a full engine build...and on The supercharger we will see haha its a secret 😉
@@boosteddave4603 Can't wait man and keep us updated with the merch definitely gonna get some
💯
@@boosteddave4603 if you start building engines let us know. . . I need to rod/piston swap mine and once in there replace all the bearings with new ones. Truck has 160k miles and still working great stock.
Ahh yeah...B@d @$$ always got good content on your videos bro..keep it up & I was lucky to 👀 it in person..Silver Back ⚡⚡⚡💪💪💪
Badass video cuz💪🏻
Thanks cuzoo
Oh boy! Someone is gonna have some fun!
We sure did bro 🛻💨💪
@@boosteddave4603 gotta admit, I like your videos. Low key on the bullshit.
High energy on the things that people wanna see.
Something can be learned from our friend boosted Dave if you are picking up what this man is laying down.
@@rednekprofessor5127 thanks bro appreciated your feedback and I just try to teach what I know and hope it helps out the community 👍
@@boosteddave4603 genuine personality helps.
You have a good attitude!
@@rednekprofessor5127 thanks bro 👍
sick!
👍
🔥🔥
Great video man 😉
Thanks bro
Whats up bro. Your vids are helping out a lot !!! Keep up the great work. Quick question. I have a fully stock lightning, if I were to slap a whipple on (2.3L) would I need to do any upgrades? Or can I just slap it right on and getting it tuned. Thank you.
I am glad I could help out bro. Bro and if u do a 2.3l u would need bigger fuel pumps and also run low boost on it bro and also a 2600maf or bigger but on a stock motor u can safely run it on low boost
Appreciate bro!!! Keep up the great work.
@@ElNemo22 anything let ne know bro 👍
KEEP EM COMING BRO..
We will bro there's alot of videos coming. All this weeks
👌
You mentioned having a few Intakes there. Are you willing to sell any of them ? Or are you willing to sell the 1999/2000 Intake Assembly that you took off ?
Thanks for your time...
The Lightning’s is the best looking trucks it doesn’t gets old
The same thing I say there design never gets old. Ford really naild it with the svt lightning and the value keeps increasing as the tike gose by. Soon looking to get 03 or 04 cobra terminator another of my childhood dream cars
@@boosteddave4603 lol same here 03-04 cobra and the 13-14 gt500
@@stevenhanna6973 them 5.8l are just something special. Specifically the performance package that comes with the extras. I like the new 2020 but there's just something I just can't maybe because it looks just the same as the gen2 coyote just upgraded bumper in my opinion. But wouldn't mind getting one for free hHa
@@boosteddave4603 yes they are are only 4 off them here in the bahamas
@@stevenhanna6973 wow are they more expensive over there due to the shipping
2001 and up have the upgraded intake and intercooler.
Yes
Curious as to why y’all went with the larger supercharger.? From everything I read is that these trucks seem to benefit better with the smaller whipple.
It al depends on what combination u going with or if u are going with max effort
🤘🏼🔥🤘🏼🔥🤘🏼🔥
Moooooe power babyyy haha
Thanks so much for the great video!
Wish I went with the Whipple. For about a year now I have the kenne belle 2.6 highly recommended by jlp. Took like 6 months to get too. Told that the 2.6kb can net up to 800rwhp. Well, that is really not the case on pump gas plus I had some pinging with the initial tune at 499rwhp.
I regret having listened to them and then regret that I am told I need race gas if I want more than 500rwhp!
My stock eaton drove and felt better even if there was less peak horsepower.
The kenne belle has a lightswitch boost and doesnt come on smoothly like the eaton does. I was told that it has to be set up that way or the rotors can heat up, expand and seize in the case. What?? Why would that even be a thing? Eatons don't have anything like that going on.
Where should I be on 93 Octane pump gas with a safe tune?
I have stock cams and the built long block with cnc ported heads.
I would like a solid 600hp plus (and similar torque) daily driver should not be too much to ask!
So wondering if the Whipple is the way to go.
Thanks bro and how much boost are u running? Stock heads can get u more than 600. Depending on your tuner. And jlp they always go with KB because he is a supplier..
It's always better to have ported or aftermarket heads.
My stock lightning swap f150 single turbo 76mm on 11lbs of boost it made around 550 or 560 whp and that's a complete stock motor on e85. But I am pushing every boundaries on my stock rods and pistons.
On 93 octane you're going to be limited to 19(ish) pounds and that will be at 10 or 12 degrees total timing. You're correct that a ported Eaton with a 10Lb lower and 2.8 upper will make better and flatter TQ than a KB will...until you get the boost above 20, then the KB will shine. With stock cams you will almost always make 100 more TQ than HP(peak).
I have a 2.9 whipple...IMHO it is the best blower available right now. You def need some cams. Who did the heads?
🤟🤟
Thanks broo
That upside down on the driver side bolt at the end next to the fire wall isn’t tied all the way
👍
👍🏼👍🏼
💪
Whats up man great video! But question, what are all the gaskets you need for a 3.4 whipple?
U can use the stock but they will fail at some point... iwoukd recommend the copper gasket rated at 2500hp
@@boosteddave4603 do they make a gasket for the upper manifold to the 3.4 whipple? Someone had told me they didn’t and had to be custom made
@@guererrosbenavides2277 oh I get u I though head gasket u mean Intake gasket.. or the supercharger gasket
@@boosteddave4603 yes supercharger gasket
@@guererrosbenavides2277 u can buy the in Amy auto parts store or on line at lmr
01 and up
Damn I was hoping this was gonna show how you were able to wiggle the blower on. It was basically "okay its on now" lol. Did you rtv the blower or did you use the gasket? I still appreciate the video tho.
I'll have a video soon. We are doing a new build
@@boosteddave4603 awesome I look forward to it🤙🏽
@@lasersgopewpew77 we changed the heads and cams. If u wana see the video it on my play list u just uploaded few days ago
@@boosteddave4603 thanks I'll check it out
@@lasersgopewpew77 💪
Sounds sweet, but I have a 98 2v 5.4 , I was wondering would this fit my 5.4 triton,
No, the 97 & 98s were NPI cylinder heads
Hey great job buddy!!! I’m doing the same swap on a Harley and I had a question for you. I was doing the inventory on my race 3.4 l whipple kit and noticed that the gasket between the supercharger body and new Inter cooler didn’t came in the kit . I noticed yours didn’t came with one neither when you were unboxing it . Those it takes a gasket there or not?
It came with the one for the 02 and up models and we had some laying around also
@@boosteddave4603 ok thanks. I was reading and it says I can use permatex gasket maker also. I’m gonna go pick one up right now. How’s the truck running and how much hp gains?
@@J.PROJECTZ no problem bro anytime and as of now we need to upgrade our fuel system we have twin wd450 now we need the fuel rails and lines and regulator and then add 25lbs
@@boosteddave4603 Yes I gotta do that to I’m replacing the injectors with ID1050X and 2 AEM 340LPM fuel pumps hoping to get to 550hp range.
@@boosteddave4603 build motor?
How long did it take you to get your whipple?
1 month
Hi I have a 99 lightning and I am planning to place a 3.4 L whipple you know where I can get the turkey pan?
Ebay or the lightning pages on Facebook, or the best option jccustom sells the mid plates for them custom
Where can I order the 02 turkey pan and intercooler?
U would have to find a used one bro
You know your stuff what’s your thoughts of putting a whipple on a “stock” lightning motor. I did an 2.9 on my Cobra looking at a 2.3 on my lightning.
2.3 whipple
60# injectors
Plugs
MAF sensor
Fuel pumps
Of course a good tune
Any thoughts? On a stock motor
Thanks bro appreciated the feedback and on a cobra its ok because there motor cane ready for 20+lbs. But on stock lightning motor i would go with a 2.9. But ubwont be able to use the full potential because even though let's say u wana run 10lbs of boost the mass or air a whipple makes compared to a stock blow it massive l. I would upgrade the internals and go 20lbs
@@boosteddave4603 bro I screwed my self with the 2.9 cobra cars like 700hp I think I over did it, have to use Torco Accelerator that’s why I am doing a 2.3 whipple. Will a stock motor handle a 2.3 with the right bolt ons the lightning?
@@boosteddave4603 if I had a set I would live stream the swap.
@@stephendwinells8260 thar would be amazing bro. I want to buy a cobra its my dream car
@@stephendwinells8260 yea bro it can and its all in how much boost and the tuner bro.
What electric fans are you guys running on the truck?
We got them of one of our customers thats sold then but tomorrow ill see what part numbers it has will let u know
I have a curiosity fitment question so I own a 11th gen with the 5.4 3v engine and I have a 2.3l whipple on it can I swap out the supercharger for the 3.4l version?
Yea u can. U just mite need a mid plate. And make small adjustments. And it will work
@@boosteddave4603 in your guess how much power will it make cause with a 2.3l it’s a 100hp gain how much will the 3.4l make?
@@isaacterrazas3509 we previously made 697whp only upgrade ls where cams and fuel system everything else was stock
hi dave
I will proceed to the same installation. When you have to split the supercharge to the adapter plate. Did you install a gasket between the 2 to install it on the engine?
Yes. U will use the stock gasket bro
yes, on the intercooler adapter housing to the intake manifold, I will use the factory steel stamped gasket, but between the intercooler adapter housing and the supercharger monting flange? did you use a gasket or a sealant
@@pascaljulien-girard3602 there's a provide gasket on the kit for that part or u can use a gasket sealant maker as well.
@@boosteddave4603 ok thank man.
I wasn't sure at first.
I didn't think I had to split the supercharge from the intercooler housing.
ok I think I know what gasket it is.
@@boosteddave4603 how much psi do you boost?
What other mods do I have to do to install a whip please do I have to do pistons and all that?
Yea bro its better to upgrade them to get the max potential out of them.
How long is the Rods going to last?
It's a built forged motor. We will see ones we finish the twin turbo set up...
I want to upgrade my stock lightning what upgrades do you recommend to do.
I would say long tube headers, lower pulley 4lb or 6lb, air intake jlt, single blade TB, 2600 maf, e85 would be a great addition some e85 fuel pumps,60 or 80lbs injectors, and if u want ported blower, alos for cooling, bigger heat exchanger, and a big ice tank
@@boosteddave4603 thank you so much I will look into all the suggestions
@@Texas214 anything let us know
Where do you take your trucks to get tuned
In mission tx at sanolis performance .
How much boost do u plan to run with the 3.4 whipple
Its on 20lbs as of now and made tremendous power and Tq and ones we get the trick flow heads + they will ported more and stage 3 cam we will go max effort on it
Where can I buy this whole kit ?
With letah performance bro
That 3rd nut in the back wasn't tight. I am sure you found it on the final checks.
We did bro haha 👍on the last pre inspection
Whats the website you got the supercharger called ?
Lethal performance bro
@@boosteddave4603 thank you
@@JonathanMartinez-jv6nx no problem bro anytime
Hey how’s that supercharger noise level when first starting it is it really loud? I’m just wanting on a tune to fire mine up.
Not really u have to really push it to 20lbs and go wot so u can hear it
@@boosteddave4603 I have the id1050x injectors I really want to start it to check for leaks but I don’t have a tune, u think is a good idea?
@@J.PROJECTZ it will turn on bro but mite be rich depending on what u used to have before
@@boosteddave4603 it was dyno tune to 400hp with stock injectors, hey also did u used the same supercharger metal gasket or you bought a new one? The manual says if is not torn and looks good to leave it.
Is going to the dyno on the 12 again to see what the sc can do with this shamu.
Sup Dave, awesome content! I have a opportunity to buy a 2004 dark shadow grey lightning for $24k its a 3 owner california truck clean title. All stock. Serviced frequently only axle and catalytic converter has been serviced. It has 127k miles tho, what do you think?
Thank u. And It's over price for the miles. And it's a 3 owner already. And have u seen u under the truck for oil leaks,rust,signs of water leaks, engine noise, unusual vibrations. I can find u one for that price same color but with 30k miles one owner.
I'm going to see it Saturday, I appreciate the response. What do you think is a reasonable price like 15k? Also the 1 mention is in texas?
@@lexuslove7624 if u can add me on Instagram @boostedlife294 for faster response and when u look at the truck I'll tell u what to look for.. and I've seen some spread around the us but around the 25k price range but super low miles in the 30k range and one owner. The thing is that the sonic blues and dark shadow grey are more rare to find. And ppl go up on price
Okay, thanks for the info ill hyu soon
@@lexuslove7624 anytime bro 👍
Any belt slip?
Not at all its working good.. we will dyno the truck Monday
@@boosteddave4603 I definitely understand that bud. Take her slow and looking forward to seeing some numbers.
@@Nathan-wn5mc appreciated. We alred have a fore triple pump complete fuel system just waiting on the fuel rails arrived today and Monday dyno
@@boosteddave4603 Definitely exciting, I'll be tuning in for that.
@@Nathan-wn5mc thank u 👍
What cam does it have?
Stage 2 comp cam bro
Soon to be stage 3
Sick build🔥🔥
@@jorgedlc5361 thanks bro
sell me a turkey pan since you have a couple. I need an 01+ too. I can't find one anywhere.
I'll see what I have at the shop bro and will get back to u asp
@@boosteddave4603 thanks. appreciate it
@@flynlow43 we sold the last kit we had bro but if get any parts ill let u know 1st
Do you have a video on the vacuum lines, I’m installing my whipple and these schematics suck.
Add me on Instagram and I'll send u some videos... on how they go @boostedlife294
Why 2002 and up man 😡😤 I got an 01 😂
Lol idk haha ford is crazy jaha
You said 99-00 then went to 02 and up. What about 01?