Ford Lightning Turkey Pan Mod, JC EGR Delete and Oil Separator. DIY
Vložit
- čas přidán 27. 08. 2024
- This is a complete tear down start to finish. Removing and cleaning the intercooler while plugging the turkey and completing an EGR delete with the JC Customs kit.
www.jccustomsc...
Sweet! I just did a JLP heads and Stage 3 cam swap on my 2002 L. She blew her passenger rear plug and I was like "never again" 🤣
Post some pics or video. I bet she sounds so sweet
I used Easy Off heavy duty oven cleaner for my intercooler, worked great
I would like to request a video showing the meaning of "self suplanitory"! 🤣
Sometimes you can't spoke on camera, so leave that stuff for all my fans 😂
make a slower video of the vacuum lines please
I'll see if I get one done this weekend. Thanks for the heads up.
Quick question i need to do mine as well but i do not see or hear of anyone replacing gaskets on this job did you just reuse your gaskets?
I always buy new OEM just to make sure you have zero issues. Thanks for asking
@BuiltMikesWay that is what I'm doing too I just wanted to make sure everyone else was as well lol
Do you have to plug the back where elbow was after removing ? Or Jst npt through inside of pan and call it good
Just the plug on the inside and your good
Thank you !!!
Another question. I see everyone fighting like hell to get the elbow out of the lower intake is there a reason you can't just plug it from the inside and leave that elbow there? or does it thread to far in?
You have to take it out, not enough threads to have both. But you can install the plug form the inside. Good question
@BuiltMikesWay did you have to run a 3/8npt tap to plug it from the inside?
Yes sir 3/8 npt
@@builtmikesway1167 just following up i finally did my egr delete and turkey pan mod and i didn't have to use a tap to get it started it went right in so weird i'm wondering if maybe different years the pan is tapped differently?
show a video of how the tune its done
Johnny Lightning did the tune they just emailed it to me
How was the experience driving the truck after doing these upgrades?
Pretty good, sounds good and runs great. I just got a dragy so I'll have some 1/4 times pretty soon. What do you have done to your truck?
Hmmm! So I'm doing a lighting conversion in my 97 f150 with a t56. Learning as I go.. so what is the purpose of this? Engine is on the stand now so now us the time to do this..
It recycling exhaust/carbon back into your upper manifold. Bring up the heat fast on warm ups. I'd do oil catch can to, so the oil does get recycle it back into your upper manifold. If you both of these your intercooler will never have to be pulled and cleaned. It's not a easy job in the truck but it can be done. Hope this helps.
@@builtmikesway1167 Yes.. yes it does help. And I appreciate the info!!
@@builtmikesway1167 so on the turkey pan mod.. just put the plug in and get rid of the hose all together?
@@19jody72 yes but run the hose to a catch can for the oil blow bye
@@builtmikesway1167 Thanks man..👊
Did this require any new gaskets?
I always use new ones cheap insurance that you don't have to redo anything
Mr BMW
There's another CZcams channel called boosted Dave who did the EGR delete he rerouted in a way that he didn't need to get a custom tune to delete the EGR function
Are you aware of this method? The reason I ask is my 97 E350 has a 5.4 2 valve as well and the EGR setup is similar
I am not, custom tune is the only to get rid of the dash lights after a egr delete. As far as I know. Hopefully that helps, have a awesome day
any tips getting that elbow out? cant get mine to budge
Mine wasn't a problem, work it back and forth. Take you time. I hope it's works out for you man.
are you talking about the elbow on the back of the turkey pan in the middle at the bottom?
egr delante no chack engine ligth!???
Yes the check engine will come on, I had a tune ready to install that fixed it. johnny lightning can help you there.