Video

@adolfovazquez9207 the long block was 13.500 shipped from hhp racing. whipple was 10,800 stage 2 I did all the labor my self and plus the new bolts and gasket, 1320 stall and dusterhoff tune

@@boosteddave4603 oh you bought the block from hhp ok I was thinking maybe some rods and pistons but your whole block is reinforced I just seen your other videos lol might need to go get one out of a truck from junk yard

@drick2659 it all depends on miles years and specially clean title no rust from 18 to 50k plus in really good condition. Right now I have one it's a 2004 model with 8333 miles and it's worth 50k

@@boosteddave4603 I have an 03 . 118,000 Mi on it I've replaced everything and it runs like crap has a massive shutter when you slam it to the floor and it won't fall out of a tree. I'm ready to sell

@drick2659 what parts have u replaced maybe I can help you out getting running

@@boosteddave4603 Plugs tr6. Gaped at .35. New Motorcraft coils' Maf. PVC hose to turkey pan. Truck doesn't throw any codes. Idols just fine. Has smaller upper and bolor exhaust. That was on it when I bought it. It acts as if it has a vacuum like but I can't find it.

@drick2659 gap the plugs to 28 and add me on Instagram so I can respond u faster and help u out

@@alfredomontero3386 yes u have to

@mylilpony71 same set up.. till now. Its been parked most of the time. My bro doesn't drive it as much

@@boosteddave4603 Damm bro! Tell him to knock the dust off of it and bring it back out!

@mylilpony71 for most of the time it's parked bro.. because he works in Chicago a d when he is here same lol just parked

@@chuckz8053 u going forged on your build

@@carwashpowerbrake2779 thanks brother appreciate the support and will be uploading the progress 💪

@@albertogonzalez8270 thanks bro

@StreetTunedJesse it's been running really good for 6lbs. I just bought the fore fuel system and smaller pulley to start tuning it with e85 with dusterhoff and start making good power will have an update video soon

@@boosteddave4603 nice man I’m boutta add a whipple to my 6.1. Did they do a remote tune for you?

@StreetTunedJesse yes sr they did some back and forth street data logs and came out great. And then 6.1 are nice bro is it forged

@@holeshot1721 no stock ecm just tuned using a sctx4

@beans7528 thank u I appreciate the support and with the 2/4 drop u won't. Need any c notch. Anything lower u will.

@@boosteddave4603 much appreciated thank you !

Bearly get boost

@@MarinVargas-ox8qe check your boost by pass valve if it's working properly

I check the boost by pass valve and it work but still no boost .should I change it to a new one ? Or what's another thing that I need to look for ?

@2papinata118 everything was swapped to a 1997 single cab it's in my channel u can check it out

@@MarinVargas-ox8qe vacuum lines or tps or maff

@boosteddave4603 Thank will check does things outs and see if it work out for me.

@Zerfaye u can do it on the stock block.. as well just get your self a drop in forged pistons rod combination

Thanks bro appreciated and the guy that would sell them to me suddenly disappeared never herd back from him...

@@boosteddave4603too bad youre hella far bro would love to go to the carmeets you guys go too. Im in Sac in CA .

@juansblue9898888 I have fam in Cali.. bro hopefully this year I'll be up there for week

@@boosteddave4603 nice what part of cali? Would like to meet you seen like a good dude.

@@juansblue9898888 fresno bro like wise hopefully one day I have alot of subscribers from cali

Thanks bro appreciated

Thank u bro appreciated

Haha tuners make a big difference lol

The bulb bro

@@boosteddave4603 right one is dimmed, so should i check for fuse or just replace the bulb? Appreciate your reply though!

@@bhavitavyasharma1903 I would replace the bulb

Yes sr

@@boosteddave4603 awesome. Thanks!

Thank u bro.. appreciated and we still here I'll be posting every Friday again

Thank primo

Yes sr will do this Friday I'll update ya on the lightnings and thank u bro 🙏

Would be nice for content

They are really fast bro and lightweight

Si mandame un msg en Instagram @boostedlife294

Congrats on your purchase 💪and they are great cars. Specially boosted 😄

@@boosteddave4603 now that a considerable amount of time passed since this video, how well does it hook? Or are you still having trouble with it

I haven't really messed with the power much. Still running 7lbs of boost. I'll be adding the fuel system soon and more boost.

If you plan on boosting the car, it may be a good option to trade in the Scat for a Hellcat. It's not just the engine, but the transmission difference.

@@1320_ikimasho don't think ill trade in this one ever tbh. I love the car as is. Im just starting out too so it delivers my every want and need, thats realistic for street driving and won't end with me going to jail 😅🤣🤣🤣🤣

To be honest we haven't used the nitrous kit.. till this day ot connected but. The car is mostly parked just running on e85 with a 416 stroker ported blower

Nope everything fits perfectly.. just remember to set the Pinon angle correctly.. or u can done one side at a time in the rear and u won't have any issues with the Pinon angle

@@boosteddave4603 thanks for the reply 🤘🏼

@@boosteddave4603 you now have a new subscriber ..

Appreciated bro.. for faster response u can msg me on Instagram @boostedlife294 bro

Any update with new wheels

It's really easy bro and plus u have and already would be insane.. just buy a lightning/Harley supercharger kit that comes complete and everything bolts on right up. Just make sure to run 8lbs of boost

@@boosteddave4603 so would it be just the supercharger kit or the full engine? I've read that the kit only fits Harley/lightning variants, thanks for the help

Anything from 99 to 04 2v will fit directly na or harley/lightning motor is the same

Thank u and they work great bro since that day till now. 0 issue with it. What drop did u get for your single cab

@@boosteddave4603 the belltech 1050sp 3/5

@@boosteddave4603it’s the 1050sp kit ..

I've seen ppl run them on 7lbs and some do work and some don't it all comes down to the tuner and the way u drove the car. I would just but mmx drop in pistons and u are good to go

Makes the engine run way better long term and helps to make the engine bay cleaner

Lol idk haha

Yes sr stock manifold and exhaust just catless delete.. mid pipes from mmx

Which one brother.. 1997 singl3 cab turbo, supercrew lightning supercharger, or king ranch or the svt lightning whipple

@boosteddave4603 king ranch bro. Awesome channel btw 11👌👊

@emeraldstevens8922 I'll post one soon I am do it fbo soon

So far haven't had any issues with then in the past.

Stock heads just hellcats valves springs ex, and custom boost cammed

Till this day he hasn't regretted. Truck is making 800whp working like a champ

I bought it of hhp they sell it or mmx

@@boosteddave4603 thank you I don’t have the big dog whipple just the Maggie tvs 2300 but I just found your channel I hope to see a lot more on your 392 I have og 2014 srt8 challenger hopefully to get hellcat power one day

@matthewcromer5605 thank u bro appreciated I will be doing a fuel system soon and go up in boost to 15lbs and the 2.3 works really good as well bro

@@boosteddave4603 are you building your own tune or downloading one to the Diablo

@@boosteddave4603 I also only have gapped rings no other internal work so far my next step is a forged drop in kit so I’m hesitant on how far I push it but at 15 pounds how much rwhp do you think you will achieve