You're not kidding about trying to keep your arm out from under the vinyl. My first attempt at wrapping the roof of my BRZ ended with several arm hairs underneath. 😳
Thanks man was planning on doing my hood and trunk after watching your videos I have a pretty good idea how to do it best videos on here on wrapping cars Thank you so much
THESE ARE SO HELPFUL i have a 04 crossfire that im going to attempt to chrome wrap by myself as soon as i fix the paint with rattle cans so i have been watching alot of rattle can painting and wrapping -- im so greatful for all these videos i love my car but i got it kind of cheap because of problems -- one was paint -- wish me luck i just got done wet sanding my car in the rain -- it worked out pretty good -- thanks again pix
I watch all the vids you post and I think you do one hell of a job by yourself wrapping those vehicles . I don't know why people would say it's not clean or find something wrong
Looks good to me, its refreshing to see someone who cares enough to do a good job. Dumb question, can you paint over a wrap, like stripes or airbrushing.
Love the vids! How long will the wrap last being wrapped this way? I'm sure this is your own car and you plan on re-wrapping it before it fails due to too much tension/overstretching? I see a lot of commercial wraps using mold and hold to make two pieces so they can provide a 3 year warranty, it looks tacky though imo.
Envelopados Nt esse cara foi o único que encontrei no CZcams que mostra como envelopar um porta malas de carro sedan passo a passo. Sensacional sem palavras parabéns para esse cara.
You should test some on plasticote if you can't get an answer, just plasticote something random. Yes, a hairdryer will work, just manage how much time you focus the heat.
Hey, how much do you purposely cut and leave yourself when you wrap each panel? How many inches more would you have To give you enough room to work and stretch? For a Rookie newbie like me who just wants to do my own car and have fun with it. Also you should do some videos on joining wraps, and how you would stretch and apply two joints for a seamless look, so later when it shrinks a little it won't have the gap.
32:28 Right there is what we call "fingering', get your mind out of the gutter. Basically, the vinyl tenses up from all the stretching and heating over a corner and instead of pulling it straight down like you did, I would suggest the World Wrap Master's strategy of using triangles to your advantage. So, instead of pulling down, you pull once to the left, once to the right, and at this point left and right are glass and the middle has some wrinkles. Pull the middle vertically down so that it tucks the edge, and boom! You just tuck the corners in neatly without it having the chance to come off which is common when the vinyl becomes fingered. Also, anytime you don't have to use a heatgun and can do it cold-stretch, that's always a plus as the stretch and distortion will be virtually non-existent with the triangle method vs using a heat gun to try and get that little bit more of stretch. Really good video CK as always, but I thought I'd just share this tip as it makes a load of difference whether you're doing vinyl, xpel, ppv, etc.
+Doodlebob thank you, you're absolutely right. I ran into the issue of not having enough film by the time I reached the bottom. Normally I use triangles but in this situation I was stuck with too much excess film in the middle and not enough to come past the edge. Since this video the trunk is still holding well, used a good post heat on it but I would've liked to have demonstrated this differently
I have watched your video 10 times and when I wrapped the trunk on a genesis coupe with vivid carbon Fibre gloss I could not get it to go on without too much material bunching up so I had to do it in 2 pieces . Very frustrating I ca say
Bro u the best I just did my hood and it was small and simple and I caught hell it came out ok thanks to u i studied ur videos lol anyway keep up the good work
CK Wraps depends on the thicknesd on thr vinyl, correct? and is it possible for you to do a tutotial on a sharkfin antenna and more videos on where you mignt need to do multiple pieces on a pannel or part? your videos are extremely helpful and well done
I have a Tacoma I want to attempt to wrap, but there is no body lines between the roof and quarters how do you determine where to join two pieces of vinyl?
+Asseeb Osmm it won't damage the film by letting it drop onto it. It'll only damage the film if it's left on for too long. If you forget to remove the magnet it will leave an impression in the film which doesn't always come out
Somebody rear ended the car behind me who rear ended me and my car was a right off....the only item that wasn't really touched was the vinyl wrap that CK Wraps did. It held up so well...too bad the car didn't.
@@CKWraps thanks for the response . I’m tackling mine now. Do you remember if you did inlays on the front bumper or 1 piece it all? Same with trunk lid. Learned a lot from your videos. I have wrapped here and there but not a vehicle yet.
coreyshirley100 I know he posted a video on that stuff a bit ago about how it gets water under it it's only for interior uses I guess go check it out very informative
There is a million ways to install that trunk and it took you way too long to complete. What kind of squeege technique is that? Dude learn how to hold a squeege and push the air out. Wowowowow that’s what my competition looks like y’all crazy for even making videos of u struggling wrapping a trunk LOlOlOL
I was specifically told by my my instructor to not use heat when applying. To only use heat to fix bubbles and wrinkles or to help the vinyl memorize the surface after applied. He said you don't want to risk stretching the vinyl. Was I taught incorrectly?
I wish i lived by this guy, hes obviously the best at what he does. Much love for CKwraps from NJ.
get a room...
You're not kidding about trying to keep your arm out from under the vinyl. My first attempt at wrapping the roof of my BRZ ended with several arm hairs underneath. 😳
LOL....ouch
"Ideal to have 2 people , even 3. " kills it solo, Vinyl Bob Ross
Thanks man was planning on doing my hood and trunk after watching your videos I have a pretty good idea how to do it best videos on here on wrapping cars Thank you so much
THESE ARE SO HELPFUL i have a 04 crossfire that im going to attempt to chrome wrap by myself as soon as i fix the paint with rattle cans so i have been watching alot of rattle can painting and wrapping -- im so greatful for all these videos i love my car but i got it kind of cheap because of problems -- one was paint -- wish me luck i just got done wet sanding my car in the rain -- it worked out pretty good -- thanks again pix
I watch all the vids you post and I think you do one hell of a job by yourself wrapping those vehicles . I don't know why people would say it's not clean or find something wrong
You should make a Vinyl up keep or maintenance video.
Again, amazing work. Wish I could work for you. An IR heater would be so helpful in these types of applications.
very clean, your the BEST!!
awesome job! great videos and good skills! Inspiring me to wrap my car with pride and precision. keep em coming!
You just are the best... Excellent job....
Great job ! Congrats amigo !
you make this very easy!!! I wish my van looked as good as this! same vinyl - not the same result!!! :-)
well done job ... really nice metod have to try it
"want me to hold it" chuckles with that bihhh I'm a master no help needed smile:)
One take video wrap! Nice.
It's spectacular to see you at work!
Oh! man how many likes do you deserve. Thanks for post your videos, the each day I learn with you. Great job bro. ✌️
Looks good to me, its refreshing to see someone who cares enough to do a good job. Dumb question, can you paint over a wrap, like stripes or airbrushing.
Thanks for this video. I have trouble installing Flexishield film on a Tesla Model S trunk lid. This is my first car, so it has been a challenge.
31 people struggled to wrap christmas presents
129 now haha
Man all your videos of wrapping are awesome.
I do have some questions for you. If u can answer me.
Perfect job
I want to see him wrap a trunk with a spoiler on it. I need more ideas.
the way it works is complicated...too much interesting.
Number 1 tool every wrapper in the world wants but can never have! A third arm. Oh what I would give for a third arm.
I hope to some day very soon be that good excellent work man!!🍻
Love the vids! How long will the wrap last being wrapped this way? I'm sure this is your own car and you plan on re-wrapping it before it fails due to too much tension/overstretching? I see a lot of commercial wraps using mold and hold to make two pieces so they can provide a 3 year warranty, it looks tacky though imo.
Portas malas feito em 40 minutos isso foi sensacional,parabéns
Envelopados Nt esse cara foi o único que encontrei no CZcams que mostra como envelopar um porta malas de carro sedan passo a passo. Sensacional sem palavras parabéns para esse cara.
Good Job.
素晴らしい 貼りです
Fuck this.... I'm not doing this my self, I will end smashing the car from frustration lol !
Thank you sifu
your vids are inspiring to wrap my 2014 Genesis.
Can you put the emblem back on over the vinyl wrap? Or should you cut around it for the tape on the back of the emblem?
It look easy when a pro at work, great job I hope I learn this too sometimes xd
HiI like to make an order a vinyl wrap from aliexpress you can advice me for a good vinyl wrap that i can order from aliexpress?Thanks
why this guy so handsome lol wtf
Molto bravo!!! panico zero!!!....
very very nicee
will the viynl stick to plasticote primer also can i use a hairdryer instead of a heatgun
You should test some on plasticote if you can't get an answer, just plasticote something random. Yes, a hairdryer will work, just manage how much time you focus the heat.
How long does it take you to wrap a car ?? And can you please do a video about the different card you use for different wraps ?
+Erik Rosas it can take 1 day to 6 or 7 depending on the car and type of film. We'll do a video on all of the tools we use
Hey, how much do you purposely cut and leave yourself when you wrap each panel? How many inches more would you have To give you enough room to work and stretch?
For a Rookie newbie like me who just wants to do my own car and have fun with it.
Also you should do some videos on joining wraps, and how you would stretch and apply two joints for a seamless look, so later when it shrinks a little it won't have the gap.
+YoungTimmy we posted a video yesterday on how much to leave as excess
ciao, il codice del prodotto applicato? grazie. ;)
Why do u use the back side of the blade to cut the excess vinyl?
do u have to remove lights to do this ???
what wrap are you using??
BEST PROFISSIONAL !!!
32:28
Right there is what we call "fingering', get your mind out of the gutter. Basically, the vinyl tenses up from all the stretching and heating over a corner and instead of pulling it straight down like you did, I would suggest the World Wrap Master's strategy of using triangles to your advantage. So, instead of pulling down, you pull once to the left, once to the right, and at this point left and right are glass and the middle has some wrinkles. Pull the middle vertically down so that it tucks the edge, and boom! You just tuck the corners in neatly without it having the chance to come off which is common when the vinyl becomes fingered. Also, anytime you don't have to use a heatgun and can do it cold-stretch, that's always a plus as the stretch and distortion will be virtually non-existent with the triangle method vs using a heat gun to try and get that little bit more of stretch. Really good video CK as always, but I thought I'd just share this tip as it makes a load of difference whether you're doing vinyl, xpel, ppv, etc.
+Doodlebob thank you, you're absolutely right. I ran into the issue of not having enough film by the time I reached the bottom. Normally I use triangles but in this situation I was stuck with too much excess film in the middle and not enough to come past the edge. Since this video the trunk is still holding well, used a good post heat on it but I would've liked to have demonstrated this differently
Is that Vvivid Gunmetal Matte?
Bad ass
this dude is skilled. I have trouble wrapping a desk lol.
Is it just my computer or do all of his videos get out of sync with audio/video?
My question is with all the heat and stretching doesn't that create adhesive line
Abraham Zavala I have strugle with what you just mention, I wish CK could answer that. Tks
Wrapping a trunk is hard as shit
It sure is
I have watched your video 10 times and when I wrapped the trunk on a genesis coupe with vivid carbon Fibre gloss I could not get it to go on without too much material bunching up so I had to do it in 2 pieces . Very frustrating I ca say
Intense.....
What vinyl is this exactly?
Bro u the best I just did my hood and it was small and simple and I caught hell it came out ok thanks to u i studied ur videos lol anyway keep up the good work
when mentioning heat, what temperature is it?
+Karol Lepeto we post heat to around 190
I'm planning on wrapping my camaro but I don't know how much vinyl I need to wrap the whole car. How much do you recommend?
+Neo_Justice for a first time I'd get 5x75 feet
I want this color on my '14 Genesis Coupe
If a panel is keyed, will the keyed mark show through the wrap or will the wrap hide it ?
+Kevien Kim it's possible that it will show through slightly
CK Wraps depends on the thicknesd on thr vinyl, correct? and is it possible for you to do a tutotial on a sharkfin antenna and more videos on where you mignt need to do multiple pieces on a pannel or part? your videos are extremely helpful and well done
donde esta ese vinilo ?????
you should be called a "Takumi" 匠 of wrapping!
What was that noise ? @ 27:57
I have a Tacoma I want to attempt to wrap, but there is no body lines between the roof and quarters how do you determine where to join two pieces of vinyl?
Ivan Leon if you are not blind you can see where the line is and then join them. you dumb fuck
I said there's not body lines you dumb piece of shit
Hahahahaha
Ivan Leon we cool yeah. we friends now 🙄
Guess at an emoji level 💀
air bubble @40:50
I'm not being a dick dude but does putting the magnet down that hard ruin the vinyl like leave a sound magnet mark?
+Asseeb Osmm it won't damage the film by letting it drop onto it. It'll only damage the film if it's left on for too long. If you forget to remove the magnet it will leave an impression in the film which doesn't always come out
This is a 3 man job. Him Meanwhile...
So it just stays on with static? A damn nifty idea, i wonder who came up with it.
Somebody rear ended the car behind me who rear ended me and my car was a right off....the only item that wasn't really touched was the vinyl wrap that CK Wraps did. It held up so well...too bad the car didn't.
5/5
Have you wrapped a cts-v? Second gen?
Yes I have
@@CKWraps thanks for the response . I’m tackling mine now. Do you remember if you did inlays on the front bumper or 1 piece it all? Same with trunk lid. Learned a lot from your videos. I have wrapped here and there but not a vehicle yet.
@@chadh6759 if you're on the website I can draw out how it was done but it needs inlays
@@CKWraps which website?
@@chadh6759 www.ckwraps.com
have you ever had problems with vvivid gloss carbon? i wrapped my hood, and I think it's getting water inside. it looks like water in the vinyl.
coreyshirley100 I know he posted a video on that stuff a bit ago about how it gets water under it it's only for interior uses I guess go check it out very informative
+coreyshirley100 yes, it's only for interior use
CK Wraps awesome thanks for the reply! keep up the great work videos are immensely helpful
Had a hard time watch you struggle. Lol
first! niiice
Hello i would like to have your contact for business
como diablos lo logra?¿¿??!
I know you do this for a profession but I don't see that trunk lasting
You Should Let Me Record Your Videos!!! I’d. Do A Better Job!👌🏼
@40:50, fail
it' s not the good way to wrap a trunk, too much tensions
watcha666 that tension at the end heat heat heat = no good
tu peux parler français ;)
There is a million ways to install that trunk and it took you way too long to complete. What kind of squeege technique is that? Dude learn how to hold a squeege and push the air out. Wowowowow that’s what my competition looks like y’all crazy for even making videos of u struggling wrapping a trunk LOlOlOL
I was specifically told by my my instructor to not use heat when applying. To only use heat to fix bubbles and wrinkles or to help the vinyl memorize the surface after applied.
He said you don't want to risk stretching the vinyl.
Was I taught incorrectly?
Suck down some vinyl...bro bro.........
"As you can see, the line is nice and straight". ..... actually, no it's not lol
Not fun!
Не вижу профи в его руках . Такое можно за 15 мин. сделать, а он 40 тратит.
The vinyl is awful .. making it hard for yourself