Architect Ladies Wallet By Purses By Holly
Vložit
- čas přidán 23. 02. 2022
- You can purchase this pattern here using code KASSIAH for 15% off the pattern:
www.etsy.com/shop/PursesbyHol...
The floral vinyl is here:
yourvinylsource.com
Water Proof Canvas:
www.fabric.com
Thread and hardware from my website:
siahswagbags.com
Alot of my other tools that I use in this video:
www.amazon.com/shop/siahswag
I purchase my metal name plates from www.alibaba.com
I am sewing on a Kingmax GC0302 Industrial machine, using a bonded tex 70 Poly thread
and size 18 needle
You can find the items I make for sale at
siahswagbags.com/
and you can find me on Instagram and Facebook @SiahSwagBags and I now have a Facebook group,
siahswagbags
/ 2648183788617172
My email is siahswagbags@gmail.com
If you want send letters through the mail here is my address!
SiahSwagBags
10940 S Parker Rd. Suite 415
Parker, CO 80134
Thank you so much, please remember to like and subscribe!!
-Kassiah - Jak na to + styl
This turned out beautiful. My sister Holly made the pattern. Her pattern with your tutorial is so comprehensive. Pure magic. Lots of love!
You are such a great instructor. Your instructions are very easy to follow and you go slow enough that an amateur senior like me can follow along. Thank You so much for this great tutorial.
This wallet surprised me...I have made lots of different wallet styles before but this one has become my absolute favourite of all time...both to make and to use. I've modified a few things...I tend to use 2 of the 8 card slot pieces rather than the id slot...and i usually make the exterior into a 2 tone by joining 2 different vinyls butterfly the seamand topstitch....then laying it on patternpiece and cutting it out Comes out great and you can match your handbag better. Also I never put the male snap side on the lower exterior..it needs to be on the flap. I alter its position so the flap side snap has enough roomfor the double stitch row too!
Anyway I'm so very glad you did this one...I adore it...take care Lindy ps love your new pup too x
So far I have made six of these wallets. 2 in vinyl, 4 in waterproof canvas. You are a wonderful teacher. Thanks so much! I enjoy your videos.
You know you’re a pro when you can say, “I can hear my needle getting sticky”!!!
Lovely pattern, love the vinyl. Not long finished watching the bowler bag. Here in Scotland we call your wallet a purse, and what yous call a purse we call it a bag or handbag x
I love that wallet, the outside material is beautiful.
Yep, this is a winner! It’s exactly what I’ve been looking for.
You are a lifesaver, I was so disappointed with another wallet I attempted and it was a birthday gift for a co worker, cutting this pattern now 😻
I'll be watching this when I get off work tonight!
Just bought the pattern. TY for the discount code and tutorial. Looking forward to it.
So beautiful ❤😊
Crazy LOVE!! Such a fun make. I bought this one & the mens wallet. Thank you for another great tutorial 🤗
Uh oh I accidentally just bought the pattern... the 15% off is much appreciated!! Great tutorial as always Kassiah...love your work and love your wallet..Lindy
Thanks for the discount and looking forward to making this one from the pattern, you do a great video
I love watching all your tutorials. This wallet came out beautiful. Inspires me to make one.
Just bought the pattern. I love your tutorials. Thank you.
LOVE IT!...putting at the top of my to-do list right now!
Love the materials of this wallet! Making this today with you. I use 1/8" double sided tape to avoid the needle getting sticky. It works great!
Such a cute wallet & love that pretty vinyl fabric 👍🏻👏🏻💖!!!
I can not wait to make it. I love it!
I have made 3 so far and I love how easy they come together. My.daughter wants a coupon wallet. I’m using this pattern as the base. Thanks for the video, they are always a help and inspiration.
Fantastic Kassiah! Thank you so so much!
Yay!!! So glad you did a tutorial for this wallet pattern!!!!
Turned out beautiful!!
I just love this pattern! It is so easy and fast. I have made 3 so far and will make one for everyone of my bags!
I bought the pattern today. Yeah ! Great vid. PJHarp
Wow! This looks great! I really need a new wallet and this looks perfect for me. Thanks for the tutorial.
Great minds think alike! Def love this one! Thank god for you woman I have been looking for the perfect wallet for weeks !! ♥️♥️♥️
Thank you for the discount
Thank you Kassiah. This is sew cute.
Kassiah you did it again! Watching your tutorials is dangerous for me and my current wallet! What a lovely wallet pattern and fabric. You find the most lovely vinyl designs!. And finally, a wallet that is not really thick. For the sticky needle, you can use Sewer's Aid rather than oil. I believe Sewer's Aid is a type of silicone. And for domestic machines, Schmetz makes a non-strick needle. And, thank you for another great tutorial. I look forward to them...my wallet, well, not so much! 😂 Continued success to you!
So pretty. Thank u, I love an easy pattern especially for a wallet 🤗
Yeyyy!!! I was just cutting out the pattern pieces to put aside until your video. And guess what? Here it is 🥳🥳. Thx Siah 🤩
Thanks for sharing, the techniques for the pockets are a bit simpler than the way I had been doing them. I learned a lot out of this and I had a similar idea in mind for the interior of the wallet. Thanks again. 🙂
thanks for a great job. allready bought the pattern!
Love it! I will make that for sure! Perfect for those gorgeous but expensive vinyls that I can't bring myself to use on bigger bags haha :D
I loved the pattern.🥰
I already bought.😉
Thanks for your video😘🌷
Sweeeeeeet....thank you!!!! Awesome!!!!
Ha quedado preciosa, gracias ❤😘🌹
Great tutorial!
So excited for this video, but I have to say you look amazing! I love your hair, jewelry and clothes....it is my favorite look I have seen on you!
Wow thank you so much!!
Super cute wallets🤗 The vinyls are absolutely lovely💕 As always thank you for sharing!
Off topic...but I'm really loving your earrings😘
Oh thank you so much!! 😊
Love your hair. Great wallet
Thank you friend! 😀
Great wallet!! Love the vinyl you used! Also I have that sweater too, isn’t it just the comfiest?💜
I just purchased an air eraser pen like you use. Does it erase well from WPC? GREAT video!
❤️❤️❤️❤️
The wallet was absolutely beautiful !!! I'd like to know what weight thread you used and what size needle? Thank you so much for sharing your talented gift in what you do. 💕 You are such an inspiration to us all 💕
I use a bonded polyester Tex 70 thread on my bags and wallets 😊
Love it!!! I only have magnetic snaps and I know you said to adjust the positioning… I’m not good at all that lol… any suggestions
Just move them the same distance.
Love it! Did you use decovil light or another interfacing on the vinyl? Thank you!
Nope no interfacing on the vinyl, only behind the snap and nameplate 😊
Très joli , je viens de commander le tuto
I love this wallet but mine came out unusable once I loaded it up with my cards, cash and coins. The snap no longer matched. I’m making another but with some modifications. My top slots also were too far up. On her tutorial picture hers is even lower than the slit. My top card pockets were also too deep and I had difficulty getting them out. But what really bugs me is the 8 x 7.x slip pocket. She doesn’t say which way to turn it when putting on the slots and neither did you. I used the smaller side because the slots fit best. Now I’m on the ID portion and again I’m asking myself which way to put the slots, sigh. On the first wallet I never checked to see which way I used it for the ID portion, so now I’m wondering. Sometimes when an error occurs it’s hard to know if it’s the user or the maker that went wrong. This time on the top slots, I sewed about a half inch from the bottoms so my cards would sit up higher and be easier to get out. But I’ve noticed the ncw slots are also a little deep. Usually, Jess and Lauren always check the pockets with cards, don’t remember if you do but you didn’t with this tutorial unless it was off camera. Another issue is she says draw a line four inches in to separate the slot sections. But if using the 7.x side this isn’t the middle. I’ve asked her about which way to put the slots but she didn’t answer. Maybe you can figure this out and tell me? I’m not knocking the pattern at all and the directions are the best I’ve seen, except for this one area. I loved mine, I used the same vinyl you did but had ordered mine specifically for a wallet. I put another snap on it but the original still shows of course. In this second wallet I’ve moved the snap about an inch which I did measure with my wallet loaded so it should be fine. Thanks for your hard work doing these tutorials.
Love your tutorials. I looked at the website you mentioned for your name tags but they only come in amounts of 100. Is this what you did? You obviously make way more bags than I ever would ❤️
For the personalized metal ones yes, but you can order smaller amounts of cite tags from www.heartwoodandhide.com, one of my favorites
Thankyou for your tutorials, they are always wonderful to watch and learn, I don't think I could make bags without them. Is there anyway you could add a wristlet strap? I am not experienced and my daughter loves the wallet but asked for a wristlet strap 😊
Yes I would think you could just rivet one onto the side of it!
@@SiahSwag Thankyou for replying. I will give it a try 😊
Great video! I don’t see the link to the pattern.
Would using a zipper foot help with sewing near the magnetic snap the second time>
Somewhat yes
Beautiful wallet & pattern with excellent tutorial & tips, thank you! Do you think adding a D ring & wristlet strap would work with this pattern?
Yes I totally do
@@SiahSwag, thank you!
I love your tutorials. May I ask what kind of snaps you use please?
18 mm and 14 mm depending on the project 😊
Do you hand cut your pattern pieces, or use a cutting machine (cricut or silhouette)? I've never cut out a purse, lol. Going to make this though, it's lovely~
I hand cut almost all of my pieces 😊
Nevermind, found it.
How do you always have your needle at the topstitch length at the corners? I always have to adjust the length back and forward at turning.
I do some adjusting as well
Great Tutorial . however when it came to sewing on the larger card slots you said to sew the bottom line at 1/8" which I did but later noticed the pattern said its a 1/4" so my credit cards kinda disappear in the slots lol this was my test wallet and my credit cards slots were also a bit too tall but I made that work with the snap. Other than that it was so easy to put together and I will give it another try and learn from my mistakes and I really have to improve my accuracy in cutting out my pattern pieces lol
Oh and thank you for the discount code
Yes this was a mistake in the original pattern that she has since fixed 😊
I know you said you didn't use any interfacing/stabilizer, but it looks like Decovil on your vinyl. Am I seeing things? I just feel that my vinyl will need a little stablized.
Just where the snaps are
Siah who makes the vinyl with the purple and blue flowers? Thanks!
Not sure which one you are referring to…
If using magnetic snaps...where do you recommend placing the top snap *male part* ?
Just far enough down that you can topstitch..
@@SiahSwag thank you! And thanks for your tutorials.
Any recommendations on where I could buy the metal tags?
I get mine off of Alibaba.com 😊
I haven’t used vinyl yet, can the edges be left showing , I have patterns I use cork and leave raw edges, hoping canvas can be used the same way
Yes vinyl, faux leather, water proof canvas, and cork can all have a raw edge 😊
If you cut wpc it can fray. If you use a hot knife it will be sealed. I hope yours worked?
That’s really cute. Does the ID part hold a covid vaccination card?
No I don’t think so
Always love your tutorials!! You’re a great teacher Siah. I’m going to try this pattern 👍
** my fat thumb accidentally hit the dislike but that’s on accident. I quickly fixed it so hopefully it didn’t affect your algorithm 😔 sorry!! 🙈
No worries! Any attention is good attention!! 😊
@@SiahSwag ☺️. You’re too kind! Lol
The pattern tq
How do I get the pattern how much tq
Anyone know of an iPhone 12 would fit in the slip pockets of this wallet?
Yes I would think so!
Is the coupon code still valid? I tried it but it was not working.
where did you get your machine and roughly how much was it if you dont mind me asking. i watch so much of your video and have bought almost all the purse/wallet patterns youve done..lol
I got my machine here in Denver at Ralph’s Industrial, it was around $1400
Oh that's not bad. Thank you!!@@SiahSwag
When I made this pattern it said to do 1/4 inch when sewing down the card slots and in your video you send 1/8 inch. Could this be why you card slots were a little high?
Yep she changed the pattern 😊
Siah I ordered interfacing from someone and forgot who it was and now i can't track my order. It was something like interfacing to go or something similiar. Would you have any idea who it might be?
I have no idea? There are so many interfacing shops…
@@SiahSwag I found it thanks...
You are amazing as always. I just made the wallet following your video. It's a lovely wallet!!!
But....the photos in the instructions were so... Invisible.... This pink colour not clear at all!!!!
When you make the men's wallet, could you add a coin pocket? Zippered or snapped... Whatever....
Thank you❤
Please do me a big favor and state the letter of the cut out pieces that you show. Thanks!
Noted!
I purchased this pattern and used the discount code and did not get the 15 percent off.
The code is expired, over a year old.
The 15% off coupon appears to no longer work.
It has expired
Hi. It very nice. I will like to buy it.. How much is it.. I m from Malaysia. Tq
You can purchase this pattern here using code KASSIAH for 15% off the pattern:
www.etsy.com/shop/PursesbyHolly?coupon=KASSIAH
How do I purchase the pattern ?
www.etsy.com/shop/PursesbyHolly?coupon=KASSIAH
What are the finished dimensions please
8 w 4.25 tall
fiskar exacto knife
Oh its all your fault that i bought another pattern. Lol
😂😂😂 sorry not sorry!
I never got the pdf pattern after I purchase it 👎🏻👎🏻👎🏻👎🏻👎🏻
You should have gotten an email, check your junk, if it’s not there contact the designer. I’m sure she will be more than happy to help you figure it out.