My First Mini CNC Machine | Detailed Assembly of Two Trees TTC-450 500W
Vložit
- čas přidán 7. 03. 2024
- My First Mini CNC Machine | Detailed Assembly of Two Trees TTC-450 500W
In this video I will be going through detailed assembly of the Two Trees TTC-450 500W mini CNC machine. This video is the first in a series. I will be covering this machine in more detail soon.
Shopping for TTC-450 500W - discount code: NBTTC -
UK - shrsl.com/4g5va
EU - shrsl.com/4g5ve
USA - shrsl.com/4g5vg
*Disclaimer
Two Trees have sent me this machine free of charge. However they did not pay for this video nor I was asked to say any nice things about this product.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#twotrees #woodworking #budgetcnc
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe. - Jak na to + styl
Pretty fantastic machine, Tomasz! Congrats!!! 😃
Looking forward to the tests!
Stay safe there with your family! 🖖😊
Thank you for watching 👍
Very disappointed you didn't show it milling, just couldn't be bothered I suppose 🤣... another brilliant video Tomasz and I look forward to your adventures with your new toy ... it might even spur me on to actually building my own CNC (I have most of the parts now) 👍
Exactly, I was super disappointed myself. Still not sure why the designs are not coming up from the the sd card. My laptop was attached to a laser engraver with a big job going so couldn't move it to the cnc 😢
But don't worry I should have a full video on milling next week 😄👍
Good luck ;)
This machine has sent me down a good rabbit hole the last 6 month so or so. :)
Great machine for learning on, and also for upgrading ;)
That's my intention. There is plenty to learn and I think this will be the best tool to do it on.
Good looking bit of kit mate. Looks a lot easier to put together than my Ooznest Workbee!
It wasn't too bad. About two and a half hours to put together but that's with recording. So far so good.
First off I think it was a very nice explanation, ty. Second, I would like to know if you are planning to buy the rotary upgrade (4th axis) for this machine? Either way a very good job ty and good luck on you next projects 😊
Thank you. No I'm not planning on getting the rotary accessorie.
I don't know if this applies to your CNC but on my 3D printer the SD card has to be formatted as a FAT32 file system for it to be read. Other ways of formatting the SD card (such as the NTFS file system) cannot be read by the device even though a computer can read it just fine.
There you go, I bet you are right had that with my 3d printer as well. Must be it, thank you
cool!
make a stencil of your face 🤓👍🏽
Why would I make such a horrible thing 😅
Hi Tomasz,I don't wish to look mean but is this machine a prototype? It certainly looks like one.
It's been on a market for quite some time actually. You have to consider that its only a mini cnc. And even with the 500W spindle it costs around $500. So let's not expect miracles here 😅
It's an entry level machine. And for that I'm fine with what it is. Question is what are it's capabilities, is it accurate and will there be any issues in the near future. And I will report on all of this over time👍
Mine has a lot of wobble due to the lead screws and one of the linear 'wagons'
So far mine is steady as a rock. Was yours like that from the start or got worse over time?
@@CasualDIY the y-axis wobbled since the start. The lead screws seem to wear quite quickly. I can move all axes about 0.2 mm in the direction of travel. I am looking into how to replace them with ball screws. Any tips? I added a couple of linear rails from Amazon to make the machine a little bit more rigid
@@user-jp1qt8ut3sNo movement in mine at all, I was actually surprised with that. Can't advice anything yet, not had enough time with this machine. Did you try to contact Two Trees to get a replacement?
@@CasualDIY they said that they spoke to engineering and they didn't think there was a problem
@@user-jp1qt8ut3s thru could at least send replacement rods.
The cable rubs against the metal cover on the left side. Please cover it before it damages the wires
Yes noticed that, need to get that sorted.
I think they made it a bit wider recently. Received mine a few weeks ago and it doesn't seem to be an issue
After cutting back the metal so the wires don't rub ,maybe fitting brushes along the open part so dust doesn't go inside ? .
@@JMAJOR-ki7ur good idea
Your going to need a bigger boat , I mean workshop 🙂
🤣👍
I can't get mine to Home, I move it to the lower left, hit Clear XY and Clear Z. Move it on the X and Y axis then hit Hhome and it crashes left and at the bottom with negative numbers.
Maybe the limit switches are not connected correctly. I would double check that