JL AUDIO HD750/1 AMP DYNO TEST!
Vložit
- čas přidán 15. 04. 2023
- Hello everyone!
in this video i go over what wiring i have under the hood of my 2019 Ford Flex SEL while also giving a Dyno Test of the JL AUDIO HD750/1 with music in real time. the idea of making this video came from one of my fellow subscribers named Diggin Low so make sure to give him a thank you for the idea.
anyways i hope you guys enjoy the video and the realistic results. - Auta a dopravní prostředky
For anyone interested in the Awesome SMD AMM-1, here is the link to Tony's video on how it works.
czcams.com/video/Bg72cRza4Lk/video.html
Pin it!
@@PhiMobileSounds done! 😎👌
That Bench Setup is FIRE!!!!!! I am going to test my 2500 and see what i get and do a reply to this video when i get a chance. Nice video!!!
Thank you and yeah its a kick ass device man. It tells you the truth about what you really get in real time.
P.s i really enjoyed your last live chat with you..had a ball🤩🤩🥳🥳P.s good job on your big3 up grade(i see your "SMD")🤩🤩
Thank you my man! 🙇♂️🙏
Super clean setup! Nice W7!!! I finally put mine in a Gately Audio ported box. It's a riot.
Nice!!! Gately boxes are a work of art man. That dude makes beautiful work.
How does it sound ?
Which box did you put your W7 in? These boxes are beautiful and not even that expensive!
I get told all the time that I don't know what I'm talking about. As far as I know, you know a lot! Way more than me!
Aww thank you 🥹 that means alot. Im always grtting told negative things by tandom people here. Sometimes it gets discouraging to make any content because of it.
@@THEAVERAGEGUY1983 Most people who say nasty things aren't happy with their own life. I married someone like this.
@I Love Recording oh man, marrying someone like that must be tough.
If I didn't live on the opposite side of the continent and in a different country, I would get you to do this work on my RVR.
I would have love to do it.
Brother it been a while since I seen your channel! Was on Best Buy review and seen your post! CZcams channel blocked a lot of my subs but I am back! Still haven't gotten out to Cali due to health issues and other things. Stay up and I finally built my SQ Camry this year so I will post later on my page! Peace and Semper Fi OORAH
I love JL audio products
JL Audio Definitely make some really good High Quality Subs, Amps and Speakers. 😎👊 i want a 13W7AE now lol
The 750/1 is a bad ass amplifier '
Absolutely!
Hd series are same output an any ohms they have an amazing regulated power supply so will do 1200w all the way down to 9v then shut off I have the hd1200
Absolutely these are wonderful amps and i LOVE them! Its one of the reason I have 4 HD amps in this car. 😁👍
Hey man, sick ass system 👍🏼
Had a question I plan on getting the HD 1200/1 amp to power just one 12” W7
Do you think if I keep the gain low, this will be a good combination? Because Crutchfield told me that would be overkill.
Hi that amp will NOT be overkill, infact the 12w7AE in this test sounded like it could handle even more power then what it was receiving. And even if ba change it sounds a tiny bit clipped from its signal. You can always dial down the amp gain a bit and have it sound its best. Infact i wish i would have gotten then HD1200/1 my self. But at the time that HD750/1 was paired with a little 8W7AE powered at about 600 watts rms and it took it like a champ. I still own the subwoofer too. 👌😎 Go For it! You wont regret it.
@@THEAVERAGEGUY1983 thanks bro got it 💪🏼
Just wanted to make sure..
@@TRDproMike 😎👊
Nice video, i just got this amp to power my 12w7.
Question:
If i have the Epicenter Micro to use as a LOC using the High level speaker inputs from an OEM HU, instead of using the RCA’s line inputs, do i set the input voltage on this amp to low or high?
As long as you have your epicenter micro with a steady 4 outs out of the RCA outputs to the amp you can leave the amp input sensitivity to low voltage. But if it goes higher than 4 volts on the epicenter, please set your amp input sensitivity to to (high) and then set your gain on the amp to what sounds good to you. Sometimes setting the gain with a tool sounds a bit too low which is why i have mine with an overlap to get some power out. 😅👌
@@THEAVERAGEGUY1983 Thank you so much my guy! That’s exactly what i needed to know, much appreciated!!🙏
@@javierp6146 right on. 😎👊
Great video. How you liking the fix 82 ?
Thank you, about the Fix 86 i haven't installed it yet. I haven't had time to remove the LC7i and rewire everything to fit the Fix86. 😅
@@THEAVERAGEGUY1983 that would make a good video as well. sound quality between the two in your application. I tested the lc2i vs fix 82. Fix sounded great.
@Digging low that sounds like a great idea, too. Hopefully, I'll have the time to do that. I started to work on my 2002 Buick Park Avenue ultra today. Oh damn was that thing dirty! I didn't even get to finish. As i was cleaning the car, i also found a lot of the weather stripping all hard and turning to dust as i touched it, lol! That's a real project car there. It's gonna be lots of labor work and parts, lol! The cleaning im doing off camera, but everything else I'll most likely be putting on video so the people can see what it took to get to the ending of the project. 😎👌
should I get a hd750/1 vs VXI600/1 for a 10w7 in pro wedge. is there any benefit for the vxi
That's an excellent question! In my honest opinion, i believe you would be much happier with an HD750/1 because of the higher wattage output it can do, and you can get pretty good results with a stock charging system because of its R.I.P.S technology, it just lacks a DSP to give you some extra tuning flexibility. Now with the JL Audio VX600/1i, you get a 10 Band Equalizer with the built in DSP which would allow you to tune your subwoofer sound however you like to make your music sound better but you will get less power out of the amp. Both are great amp choices. I hope this helps and appreciate you asking for advice it means a lot to me for sure. If you have any other questions, please feel free to reach out again. 😁👊
I had this debate about a alternator wire needing to be fused or not, and yes it does need to be fused, if not tell that to my car which alternator wire got red hot and burnt all the rubber insualtion off and had I not found it in time it could’ve caught on fire . So I Investigated this and turns out the oem vehicles use the wire terminal as a fused link or the wire itself has a weak point where it melts off just like a fuse.
Im glad you caught it on time. I haven't had any issues with mine. It still works 100%, and i guess it really depends on what type of wiring a person uses when doing the BIG 3 or BIG 4. In my case, i went all out with the most expensive and heavy gauge OFC wire i could afford, and im glad i did. I have the BIG 4 in my flex worh 4/0 OFC wiring, so i have no alternator whine sound coming out of the speaker and zero issues with the wiring melting or catching fire. I did prepare my wiring with fire resistant techflex wireloom, which is also very expensive 😅 when i eventually repair my 2002 buick park avenue Ultra and put its sound system in it, i will do the same to it and maybe record it. Since i changed my hobby from car audio to electric scooters it probably wont be uploaded, specially since the car audio community is super critical on DIYers.
@@THEAVERAGEGUY1983 yes, having thicker wire helps of course, its when the insulation has a part where it rubs against something and it goes thru and causes a shortage and than that wire flows directly from the battery
Do you still have the HD750/1? How is it working for you? I'm thinking of getting 1 for a CLS10"W7
Hi Silverevans, i sure do still have the HD750/1 its my main subwoofer amp. Its still working great. I highly recommend it. And it will definitely be a great pair for the CLS10"W7.
Should used a sign wave tone for the first test bro and the second even if it's not real world scenario it would give you real watts and ohms more accurate just my opinion. And that amp would still be doing 750 if ya did.
Edit, just got to the end and my comment wasn't meant to be demeaning and you clearly do know what you're doing pls don't take my comment as rude or negative. It was only my opinion and you explained why you used music in the finish anyway. ✌️
It's not a problem. i didn't take it that way at all. You actually left one of the nices' comments here and gave some good legit feedback. that's what matters. 😎👊
Can the HD 750 handle a W713.5?
Hi Samuel, It sure can. Just wire it up at 3 Ohms and your good to go. 😁👊
Oh yeah break out the JL content!!!
What is he saying when he talks about the wire? I hear 4 “aught”.
You heard correctly 4/0 is 4 times the size of a 4 gauge wire. Thats the main cable size for the power going from the alternator to the battery and from the battery to the fused distribution block. 😁👍 but its definitely not cheap. 😬
Ah I see now. 1/0 is a larger diameter than 1 AWG and 2/0 even larger and so on for 3/0, 4/0. Never knew about the /0 gauges.
Edit: also thanks for the reply.
@o0Donuts0o you're very welcome. 😎👊 most people use those big sizes for running power from them egine bay to a ground or fused distribution block and from there put the 4 Gauge wirirng into their amps inside the car or trunk, depending how many amps they are running. In my case i have 4. So i needed that extra power. 😅
@@THEAVERAGEGUY1983 Thanks again, sir. I’m thinking very heavily of getting back into car audio after a ~15 year break and oh boy have things changed. Class D amps, DSP’s, OEM integration and not to mention the once great brands that have fallen from grace and are just Amazon shovel ware now. So glad to see that JL and Rockford have maintained their reputation.
I could've given you some music that wouldn't have been copyrighted. Just let me know next time. :)
Absolutely!
I feel like my bass is super low
Hi my man, im sorry for replying a day late. When you say super low, do you mean low in output as in not loud enough?
500 amp fuse?? Dude the size of fuse is not relative to resistance. It’s to protect the wire. 4awg will burn up at 150-200 amps of current.. you said yourself battery puts out 70 amps of current. Alt 125.. your 500 amp fuse will never protect anything
The stock Alternator is 175 Amps, the battery is 72 Amps, the BIG 3 is 4/0, i dont just havr car audio gear in the car, i have 4 13.3 inch monitors, a Game Console, EL LED Ambient lighting, super fast charging USB C ports at 25 Watts A charger x 6, also i am supposed to upgrade the Alternator to a 390Amp so this is plenty. Also my flex does NOT have a fuse in the stock wiring. So i have no idea what else to tell you buddy. 🤷♂️