How To Replace the Clutch on a Yamaha Raptor 700
Vložit
- čas přidán 16. 07. 2024
- Replace the Clutch on a Yamaha Raptor 700: rmatvmc.link/clutch-replaceme...
Does your clutch feel like it's slipping, chattering, or just not working correctly? It's most likely time to replace it, or at the very least, inspect the components for wear. So, in this video we show you the proper procedures on how to replace the clutch on this 2008 Yamaha Raptor 700. The steps shown will be similar for all year Raptor 700's but check your OEM service manual if you are unsure.
Check out rmatvmc.link/home-page for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?... - Jak na to + styl
Excellent video!!
Got to love that side cover gasket. Scraping that gasket off takes longer than replacing whole clutch. Nice to see a Raptor video. Thx
Tell me about it. Thank goodness for COVID and working from home - I spent two hours in Skype meetings working on just the cover!!!
@@icoad Time well spent! Tired of the skype meetings...
Put grease on the gasket makes easy take off
Parabéns pela aula
O meu raptor está com esse mesmo problema. Estou precisando adquirir discos novos !!
He failed to put oil in the crank case lol 😂 rookie!!! 😂😂
Thanks for the video, i will replace it by myself
Me too. Go slow an keep things very clean. Don't over tighten oil related bolts ! Use Maxima semi synthetic oil not Yamalube. Belray great too. Copy?
Y not yamalube?
Sweet! Thanks for this "how to"!
GOOD
My kit didn’t come with jugger springs . Do I need them ? Time of video is 10:19 those 2 rings didn’t come with the clutch kit
I don't think he bled the air in the coolant
Different thickness of pressure plates? For added pressure...... I own a nodded Yamaha raptor 770 I already have a Hinson clutch basket, and after market springs. Anything else too add a better hold? Guessing I'm pushing close to 80hp, I also have a plus 3mm intake and plus 2mm exhaust valves. Ect
... many extras....
What does something like this cost at a shop?
What year ?
Mine won’t shift after the install
What type of grease are you using to hold the gasket in place? Thanks!
We used the Bel-Ray Water Proof Grease in this video.
www.rockymountainatvmc.com/parts/bel-ray-water-proof-grease-p
Great thanks!
I do not have the thin wire, can i buy it anywhere? Is it necessary?
Your clutch was probably replaced before.....it's better without it and the half fibers and steels. I think 8 full fibers and 7 full steels is what you want instead
reminder - everyone should be replacing that half size fiber plate with a full size one and removing the retaining wire and the 2 large metal washers.
can you elborate?
@@DRIVESHOWTV if you look on a microphishe for a 2007 Raptor 700 for instance, take parts #8, 9, 10 and 12 - throw in trash. Order an extra #13.
@@DRIVESHOWTV if you look at a microphishe for a 2007 Raptor 700 for instance, take part #8, 9, 10 and 12 - throw in garbage. Replace with an additional #13.
What is the website soni can order parts
The first link in the description of this video will take you to our website with all the parts and tools used in this video.
Hi, in which order and how to set up the friction plates by thoes nutches cutted off, on the friction teeth? Please, your answer would help me a lot. Thanks in front. :)
I just saw the answer before. Thank you!
Good job! Take ur time. Torque all bolts to spec!
What’s the wire called after the first two discs called I need to replace mine and can’t find a replacement.
You actually don't need it
Not for us 😅
every time I try to switch gear it doesn't go it just goes to the gear and I hit the gas and it doesn't go anywhere would this fix the problem?
Get a pro to replace ur clutch or follow this to the "T" ..tighten all bolts to spec. Get a torque wrench 🔧.