Yamaha Raptor 700R Engine Build Part 3: Clutch Build and Water Pump | Partzilla.com
Vložit
- čas přidán 26. 08. 2024
- See the components for part 3 of our Yamaha Raptor engine build here: bit.ly/Yamaha-R...
Note: our phone number has changed! Call us at 1-229-584-0046 for help finding the right parts for your maintenance needs.
In part 3 of our 2017 Yamaha Raptor engine build, we’re going to build the clutch on our Yamaha ATV. then, we’ll install the water pump and the oil filter.
Take a step back and see us install the shift shaft and oil pump: • Yamaha Raptor 700R Eng...
See the Yamaha Raptor engine build from start to finish here: • 2017 Yamaha Raptor Eng...
Check out these diagrams to see where we’re working:
Oil pump diagram:
www.partzilla....
Clutch diagram: www.partzilla....
Water pump diagram:
www.partzilla....
VIDEO HIGHLIGHTS:
Installing the drive gears - 1:50
Installing the clutch basket - 5:50
Building the clutch - 7:25
Installing the crankcase cover - 11:15
Installing the water pump - 13:46
Installing the oil filter - 14:45
Find thousands of Yamaha ATV parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2017 Yamaha Raptor 700R, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Yamaha R6 engine build playlist:
• Yamaha R6 Engine Rebuild
Yamaha YFZ450R repairs:
• Yamaha YFZ450R Repairs
#yamahaatv
#partzilla
#atv
Please keep making these's type of video's i do watch the intensely and enjoy them
I would of used lock tight on the crank shaft main nut because they come loose and would have nipped it up to 90 ftpd.
Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Very well, thanks a lot 🙏🙏🙏🤗
you never put back the wire holding the cousin spring, before putting back the plates
Hey John what way does that oil seal go that the plate with 2 screw hold in ? I've torn it 2 times when putting the clutch over back on ?
Greetings to you from the heart.. We thank you for your efforts and your most good explanation 🌹
Ahhh you skipped putting in the wire on the clutch. Dam
Seu video são nota 10
What's the engine going into?
Ya that's the real question
Hey love the videos, very helpful just wondering do the raptor 660r an raptor 700 have the same engine besides the bigger piston ??
little late on this but, is there a reason to leave out the retainer wire that holds the first few rings and fiber disc to the clutch basket?
I have a yamaha raptor 700 I have problems with it when the engine warms up it refuses to start, it only starts if you press the accelerator and it works interrupted
if you are having trouble starting the engine when the unit is hot you may need to preform a valve adjustment! check out this video! we show you exactly how to do the job!
czcams.com/video/hpsXYkjnZKc/video.html
😊 muito bom
Top!
BOY WONT GOD DO IT🙏🙏🙏
😎👍👍👍👍