Window Tinting Peel Board For MOBILE INSTALLS: Amazon DELUXE Easel
Vložit
- čas přidán 9. 01. 2020
- This is a cheap and quick peel board setup to use when doing mobile window tinting outside of your shop. I've been using this Amazon Deluxe Easel as a peel board window tinting for a while and it works really good. When installing window tint, it's always good to cut your film pieces off of the customers car. This Amazon Easel will also help to keep your window tint clean and free of contamination that can be on a dirty car. Take your window tint from the peel board glass right to the car. The glass dimensions are 32"x38".
Check out Izreal33 45s channel / izreal3345
Amazon Deluxe Easel: amzn.to/2FU9Rm1
Fade To Black Merch! teespring.com/stores/faded-me...
Tint Tools
Heat Gun I use: amzn.to/2T9Spm8
Steamer I use: amzn.to/2XrzhiW
Long Handle Auto Bulldozer Squeegee: amzn.to/395pPr5
Knife I use: amzn.to/2E33GLv
Spray Bottles I use: amzn.to/2Nj9swP
Microfiber towels: amzn.to/2GXYHyT
Blue max Squeegee: amzn.to/2NkMXYd
Olfa Blades: amzn.to/2U2E3Bk
Square Blades: amzn.to/2EozJac
Deluxe Easel for mibile: amzn.to/2FU9Rm1
Silver Sharpie: amzn.to/2UC4v8e
Yellow Squeegee: amzn.to/390vUoN
Stroke Doctor Style Squeegee: amzn.to/36ZwOzY
Felt Squeegee: amzn.to/2T15TQF
Small hand Squeegee: amzn.to/2Fu8fQ1
Lil Chizler: amzn.to/2ZZoKgj
Filming Equipment I use:
Smooth Q Gimbal: amzn.to/2BP1NBF
Nikon D3300 DSLR: amzn.to/2GZN9Ll
TAKSTAR SGC-598 Microphone: amzn.to/2thDU4F
Tripod: amzn.to/2XimmzB
Moukey MCM-1 External Video Mic Shotgun for Phone amzn.to/2qHaJH1
EACHSHOT Q-Ring Hot Shoe Adapter for Zhiyun Smooth Q amzn.to/2XHFxn6
LEDs in my garage: amzn.to/2Ey0IA8
THESE ARE AFFILIATE LINKS!!
DONT CLICK THIS: bit.ly/2H0kV4G?sub_confirmati...
HEAT SHRINKING REAR GLASS: WINDOW TINTING TIP FOR 2020
• HEAT SHRINKING REAR GL...
WHY YOU NEED 70% CERAMIC FULL WINDSHIELD TINT IN 2020
• WHY YOU NEED 70% CERAM...
HOW TO: VINYL WRAP TAIL LIGHTS ON A CHEVY IMPALA 2014-2020
• HOW TO: VINYL WRAP TAI...
HOW TO EASILY INSTALL VINYL WRAP ON YOUR HOOD IN 2020
• HOW TO EASILY INSTALL ...
INSTALLING WINDOW TINT IN THE COLD WEATHER: PART 2 FOR 2020
• WINDOW TINTING IN THE ...
I Vinyl Wrapped One Fender Part 2 Added More Gloss Avery ColorFlow
• I VINYL WRAPPED ONE FE...
How To Install a Vinyl Windshield Visor Strip/Banner/Eyebrow 2020
• HOW TO INSTALL a Vinyl...
2019 Toyota Highlander Tinted and Luxe Vinyl Wrapped Tail Light Installation
• 2019 Toyota Highlander...
How To Window Tint A Back Glass |Old School Rubber Seal Windows No Dot Matrix
• HOW TO WINDOW TINT A B...
The Easy Way To Install Vinyl Decals | The Hinge Method
• THE EASY WAY TO INSTAL...
I Wrapped ONE Fender on my 2015 Impala in Avery ColorFlow Gloss Rising Sun
• I VINYL WRAPPED ONE FE...
Truck Windshield Visor Strip Hand Cut Installation
• HOW TO HAND CUT INSTAL...
1999 Pontiac Trans Am Tint Installation Back Window PITA
• 1999 Pontiac Trans Am ...
Chevy Silverado 2500hd Chrome Deleted and Window Tint
• VINYL WRAPPED GRILL AN...
The BADDEST 2nd Gen 12V Cummins in Wisconsin!
• The BADDEST 2nd Gen Do...
Gloss Black Wheel Covers on a Forest River RV!
• Gloss Black Wheel Cove...
Lifted and Tinted Mega Cab on 26x14 American Force Wheels
• Lifted and Tinted Mega...
Buick Regal Black Wheels, Tint and Vinyl Trim under $1000
• Buick Regal Black Whe...
Audi RS5 Window Tint Installation
• Audi RS5 Window Tint I...
Tinted 2018 GMC Sierra Denali 2500HD on 22x10 Hardrock Offroad
• Tinted 2018 GMC Sierra...
Window Tint Installation: 2018 GMC Sierra 2500 Denali HD
• Window Tint Installati...
Chevy Silverado Two Windshield Visor Strips in 5% Tint: 5% Over Factory Glass
• Chevy Silverado Two Wi...
Window Tinting: To Shirnk or Not To Shrink Your Tint
• Window Tinting: To Shr...
Window Tinting Tool Part 2: The Money Makers
• Window Tinting Tools P...
2019 Dodge Challenger RT Scat Pack Tint Install
• 2019 Dodge Challenger ...
Full Windshield Tinting Tip: Helpful Info 2019
• Full Windshield Tintin...
Window Tinting Tools Part 1
• Window Tinting Tools P...
Winter Storm 50% Windshield Tint
• Winter Storm Driving w...
Frankenstein Window Tinting Technique 2019
• Frankenstein Window Ti...
How To Tint Your Back Glass 2019
• How To Tint Your Back ...
Reverse Roll Window Tint Technique 2019
• How to Reverse Roll Wi...
Impala Avery ColorFlow Roof Wrap Install 2019
• Chevy Impala Avery Col...
The Best Way to Remove Window Tint
• The Best Way to Remove...
Tinting a Mercedes-Benz S-Class, Lets Go Back to 2002!!!
• Tinting a Mercedes-Ben...
How To Remove The Ford Windshield Mirror - Don't Break Glass
• How To Remove Ford Win...
#windowtintingmobile #mobilewindowtinting #mobiletintingpeelboard - Auta a dopravní prostředky
If anyone gets an Easel or anything Tint or Wrap tools from the Links Below let me know.
I purchased the easel on Amazon the other day. This is a pretty dope setup and I am going to use it. Thanks for the share brother.
@@808tintllc5 that's awesome.. Definitely Loctite all of the bolts and I'd use a vice grip on the rear to be safe.
Just got mines setup gonna use this bad boy in the morning. Chee whoo. Lets gooo!
@@808tintllc5 that's what's up! Keep me posted..also check out the Video Series when you Comment what's going on with YOU!
Fade To Black LLC I’m trying to buy this on Amazon I can’t find it .
Thanks for the info! Might build one for personal use!
Thank you!! I've been looking for something like this!!
Thanks for watching. I still use this when I go out to other shops or when I have glass pieces out of the vehicle.
I work in a glass shop and tempered glass is a lot tougher but if it breaks it will shatter into a million pieces unless it’s tinted the best glass to use for a peel board is laminated glass, if it does break or crack it will still stay all in one piece just a little advice
Appreciate it.
I usually apply safety film on the backside of my glass to help with any issues. I've broke two now lol
Bought one using your link, thanks for sharing!
Thank you for checking out and supporting the channel. Still use mine all the time 👍🏾
Great idea. Looks very portable.
Yeah it's pretty light weight and folds up easy. Thanks for watching.
Just ordered it my man - thanks!
I hope it works out for you. I’ve been using mine for years. I’d loctite all the screws though!
Brother I have been tinting for 32 years and that’s the best I have seen
Hey man thanks for watching and checking out the video. I greatly appreciate the kind words.
I'm just trying to do what I can to help out my customers.
Fade To Black LLC I’m also an OG RR
Man I gotta give you some mad props for this...i used this setup for the first time today, total game changer for me. I used vicegrips on the middle bar and loctite on all the bolts. I also put locking wheels on mine and painted the back of the glass white. So much better then peeling on the car. Thank for the great tip man!!!
Hey I'm glad it's working out for you.
I've been using mine all the time as well.
I think I might need to buy another, since it's getting banged up from all its travels ha ha.
I'm happy I was able to help you out. 👍🏾
Genius boss !!!
Much appreciated, thank you for checking out the video!
Good stuff!!!
Thanks for watching man. I hope all is well with you?
Thanks a million brotha! purchased it thru the link. This was the last piece i needed to be able to tint professionally! I already bought my truck now im almost ready to go
Hey I hope it helps. I'd Loctite all the bolts and use a vice grip on the part that extends and you'll be all good. Still using mine all the time.
Good luck with things. 👍🏾
I wana do mobile tinting... my brother is teaching me how to tint how do u like mobile tinting ?
@@OmarLopez-jh5kt well that depends..I do mobile when it's worth it but I still tint out of locations and I prefer that. I'm not 100% Mobile but I will go to a customers location. It's not bad but I make sure they have a good place to install, I'm not just going in a parking lot or dealing with bad conditions. Check out our Wednesday LIVE STREAMS and we talk about Tint.
@@OmarLopez-jh5kt it takes a while to get the technique down, but once you learn properly, its a pretty fun way to make extra cash!
@@FadeToBlackLLC thank you i ima watch ure live stream ....i paid 1200$ for a 3 day training i start next week lets see how that works
Ordered the stand from your link...appreciate your help on here and FB in the groups..
Hey that's awesome..I use it my all the time.
Remember lock tight all the screws right away. Also the round feet threads on the bottom.
Use a vice grip instead of the twist knob to the hold up the back and you should be good.
I might order another just in case they stop making them 😂
Get your tint on.. Hopefully soon I'll have more videos.
@@FadeToBlackLLC just came back here to watch again and now I'm going to start using vice grips too, the small one..lol
@@jamieg.3829 yep the baby grips are now living with my stand ha ha
Thanks 🙏 🔥🔥🔥
Thank you!
Just found your channel; subbed.
Much appreciated 🙏🏾🙏🏾🙏🏾
Aaaaaaa there I iz thanks for the shout man I appreciate it bro !
Thanks for copping some Merch
@@FadeToBlackLLC no problem man "izreal" ! And again thank u for the great content u put out bro
@@Izreal3345 I'm trying man, I'm trying.
This is awsome Brother all I do is mobile Tinting I was actually looking for a way to get a portable garage came across your video
I hope I could help. I do a ton of mobile and my stand works really well. Either way a board it would cut on is a Mustang. Don't want to scratch any glass
I just bought this (using your link), it’s my very first one and I’m going to use it for practice. Not sure what type of glass to put in it
I got some tempered 1/4" thick glass with enough room to do a set of fronts. I can do visors and such just stick them and hang down the be.
I'd definitely use a set of Vice Grips to hold it up and Loc Tite all the screws.
Then you'll be good to go. 👍🏾
Appeciate it!
Where did you get the glass? And that size glass? Whqt about plexiglass, where would i buy that? Thank you for your videos, love them.
I got it from a local glass shop. I think it's 32x36. Plexi will dull your blade and will get cut into leaving marks just ruing it. Thanks for watching.
Do you know about what the height is in its most compact position and the top part removed?
It's 56"s with the top part slid out.
What do you have or use to hold tint rolls for tinting front and back window by your self
Watch my other videos I just use what's around me.
Hello sir. Whats you think about piece of aluminium instean i user glass
I think the aluminum might be a little aggressive on the window tint if it stared to get rough. Also it would probably eat blades like crazy since it's not a smooth surface. I'd use PLexi glass before I used anything metal or close.
Where could I buy 32x38 tempered glass 1/4" thick?
Google a local glass shop and have them make one.
Will this be compact enough to fit in the back seat of a car/sedan? Or can it be disassembled easily? In the amazon description it says it’s 84” h that’s why I’m hesitating hoping that’s the max and will fold or compact to smaller size?
If you can fold down the rear seat then yes.... It can be taken apart but that is kind of a PITA to remove the screws and pull it apart.
The very top part can just be removed and slipped out.. The part on the very top of my glass in the Thumbnail.
Fade To Black LLC thanks! Do you know about what the height is in its most compact position with the top part removed?
Is it normal for the glass to be loose after it’s in the easel? Also, when you take it on the road, do you remove the glass before you load it in your truck or leave it on? Thanks. Stay Faded All! ✌️
Your can put a towel under and on top of the glass where the stand touches it. That will help.
Yes I take the glass off when I travel with it.
What do you do for rear window on sedans
I have plenty of Back Window install videos on here that show you from start to finish.
Hi bro I just finish my Windows tint class I will need a peel board for Windows tint where can I get it
I explained what I use in the video!
Can you use plexie glass instead of real glass or will the plexie glass get cuts on it ?
You already said it, the Plexi will get cuts from the blade. You can use it but that will happen.
where can i buy tempered glass this size?
I ordered from my Local Glass shop. Try that.
What glass and size do i need for the stand?
Get any size that your comfortable with. Mine is around 38x32 so I can take it in my van when I go do mobile installations.
“I had a lot of people ask me what p💦 eel board I’ve been using” 😂
Will it be strong enough to withstand a little wind?
I wouldn’t take that chance. I usually put it up to a wall or something solid when I can.
@@FadeToBlackLLC ah ok, thanks for the response! Just starting out myself, and it has been quite windy every time I go do a tint lol
Where'd you get the glass from? What's the size? Thanks for the tip man
I mentioned the size of the glass.. 32"high and 38"s wide. Yes you can just find anything that available but I orderd mine from a glass company so it would fit right on this Easel. This one it Tempered, the last one was thinner but I tinted it with safety film and it still broke. I have a video today that one linked.
Fade To Black LLC Great video! Did you order 1/4 inch glass or 3/16? - We have a local glass shop I work with so I have no problem getting anything custom.
@@arturorodriguez1680 I think it's 1/4 tempered.
Did you see my other video? I broke the Glass because something pushed on the glass while I was heading to a job. I got tempered this time.
Fade To Black LLC Yes., thank you. I’ll get 1/4 tempered. I’ll try to find those rubber edge protectors to put around the edges. I’ve broken glass like that too., by bumping the corners into something else. Thanks again!
@@arturorodriguez1680 no problem, thanks for watching. Hit that Subscribe button.
Where do u buy the actual glass at
Any glass shop or find something that works.
Dont see the link down there for the easl
Second link, I just changed it. I had it wrong and your the first that noticed. Thank you.
Were did you get the glass bro
Any local glass shop.
where do i get the glass?
I talked about it in the video, any glass shop can make it to what you want.
How much do you honestly make per month doing mobile and how do you get your clients? I just wanna know before I spend thousands on a mobile set up... thanks man
I did this for 6 years on the side and 4 years full-time so I'm pretty established at this point.
I'm not 100% mobile. I will go do Mobile for certain businesses that I work for.
So how much you'll make depends on a lot of factors. Add up some jobs and see how much you'll need to be comfortable in a week. At the moment I'm booked out till the second week of February. So I'll fill in small jobs when I can.
My market and prices will be very different than yours.
Where did you get the glass?
Local glass shop
@@FadeToBlackLLC I figured, so I ordered one. Got my stand and Ima get my glass on Monday! Thanks to you!
I cant get ahold of one of these
That sucks man.
How thick is the glass
I think 1/4 inch
Fade To Black LLC sounds good thanks man you think a 30x30 would be good all the way around for side windows
@@ericluckey3229 I do a lot of trucks and they are usually around 36"s wide by around 20"s high so mine is like 38x36 and I have no problem with cars or trucks having two pieces on it. I use it in most of my vidoes so you can how it works.
Wont plexiglass get cut by the blade?
Yes, I'm not using Plexiglas? Watch the video or read the comments and you'll be on the page.
I've also made a couple of videos on how you need to be careful because it's easy to break these glass boards moving them all over. I've broke a couple 🤷🏾♂️
Have a good one 👍🏾
@@FadeToBlackLLC right i know u got glass.. in the video u said "u could even buy plexiglass glass or a board" so thats why i asked.
@@FadeToBlackLLC was about to buy an easel from amazon thru your page but their sold out... So ima have to make a cheap one for now.
@@confidential8738 yeah I heard. I wanted to order another one as a backup and didn't make it 😢
@@FadeToBlackLLC could u clarify the plexiglass thing?