MELTED Battery! Customer States: Doesn't Start...WHY?? Electrical system Failure!
Vložit
- čas přidán 31. 05. 2024
- 2018 Chevrolet Silverado 1500 AC Delco Battery has hole melted in the case!
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers!
rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Amazon List, must have for any toolbox!
ATD Tools 13782 10-Piece Triple Square Spline Bit Socket Set amzn.to/3RV2fUB
Same as Matco. Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
Mercedes BMW VW Wheel Stud Master Kit: amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! amzn.to/3IfDeOa
Brake Caliper Compressor: amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: Currently Unavailable
My Camera Gear:
Gopro Hero 8 amzn.to/3mPnpFA
Gopro Hero 9 amzn.to/3EKDcM1
Hero 8 Dual Charger amzn.to/3EId84c
Flexible Camera Mount amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.” - Auta a dopravní prostředky
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
In my experience as an electronic engineer, is that many over heating situations at a terminal is due to poor connection. The make and break of contact cause arcing and a lot of heat, especially if its a high amp circuit. That arcing alone can melt things without any components in the circuit being defective.
My thoughts exactly.
but twice? i can see once oopsie moment but twice? gotta be something more to it.
Totally agree with you on this. Totally poor design. I know they have to put the battery on the opposite side where the driver sits, this is why German car makers put them in the boot. Helps handling and safer, away from prying fingers and heat. Also helps to have rubber matting.
I haven't finished watching but my standard action with some manufacturers was to make a rubber mount mat and in other time create a rubber coated box with ventilation to isolate the battery. When i did stealth high performance audio installation way back in the 90's before manufacturer installed dash radios were common, used to use 2 to 6 5000kva caps for high draw use and a seperate high current fuse box. I despised aftermarket installers that just lumped extra connection to the terminals and now I see the US manufacturing cheapskates doin it 🤦♀️🤣
@@dvvaughn564 to your point, one may consider that the issue is on the cable terminal side which did not get replaced or a nut that does not lock properly. One can only speculate. But poor contact around the heated area is a high probability either way. I don't recall him pulling the insulation back to check if all of the cable going into the terminal is still in a good condition, so the issue may still be there, who knows.
Think about it this way, what kind of current will heat up those bolts and bus bars but not heat the cable? when your contact has like twice the metal but that's where the heat is, then it's resistance or arcing forming at or near the contact and probably not an over current condition.
Stripped and cross threaded terminals would point to loose connections causing arcing and resulting in heat build up melting the connector block and battery case.
That's what I was thinking.
Agreed, or... the the fault was originally in the battery and when it failed it burned a hole in both distro blocks*, maybe?
*Because they only replaced the distro not the battery that was causing the problem.
I totally agree with you , on clue is the battery has been replaced recently , and most likely poor installation and or wrong torque specs for terminals nuts , also take into sometimes main fuses gets melted if battery polarity reversed
Drunken owner probably working on their own vehicle
That would account for the fact that the fuse didn't open. There was no over-current, just a hot spot from loose connections. There's a lesson here. If the fuse does not open and you have heat damage, it's always gonna be a loose connection and not an over-current. Somebody write that down.
Wiring diagrams and electrical repairs are incredibly intimidating to me. But watching you troubleshoot by using a diagram not only gives me the gusto to think I can dive in and tackle something like this but it’s also really educational and informative. Thanks Ray.
Eric O had one of these power steering problems the other day that the dealership was going to charge thousands for. It turned out to be the braided grounding strap on the passenger side between the frame and the firewall. The corrosion was interrupting the electron flow after being inundated with salt. The fix was a $14 insulated battery lead.
I saw that, brilliant troubleshooting video. GM engineers are starting to follow Ford on their stupid ideas. That grounding point should never have been put that close to a wheel well. How long did you think these idiot engineers thought it would last?
@@jw-hy5nq ....they probably got an award from GM hierarchy, for that genius bit of built-in obsolescence 🤣
It was very similar problem and symptoms.
Saw that and could not help but think the same thing.
@Rainmanraysrepair I too watched Eric O's video regarding a Braided Ground Strap causing all sorts of issues. One with a Power Steering problem. The Fix was a $14 - #2 gauge insulated wire with crimped terminals and Wire wheeling the surface before installing. 😀
Moral of the story: Don’t drink and drive so shoddy mechanics don’t have to mess with your truck installing and uninstalling intoxalocks. And then Ray doesn’t have to fix your entire electrical system.
In my area they have car audio shops installing interlock devices. Lol Im assuming the same in Florida.
And learn to properly bypass the hack job these car toys installers do since the DUI business will forever exist.
Essentially, the person who installs the breath lockout is the lowest bidder to the government.
Where I'm from they don't even issue those things anymore, too easy to bypass... simply not effective at all. People who are stupid enough to drive while under the influence will find a way, even taking away license doesn't stop them... it's a problem between the ears, not something solved by a device.
@not sure I’ve had one in Florida. I had to go to a specific place about 50 miles away (I was in the middle between 2 locations) but all they did there was install those interlocks. Mine was 13 years ago and they were serious about that stuff back then
Ray, you have become a part of my morning routine. Thank you for your fun mechanic shenanigans!
Mechanicanigans?
@@josepherhardt164 100%😂
I have a friend, Ron, who calls those screws and nuts you found "Bush screws" after he fixes something and finds left over parts, he tosses them in the "bushes".
Oh, Ray; you’d be proud of me. I replaced my battery terminals the other day with good solid brass ones, gave everything a thorough clean. My negative terminal was loose despite being as tight as they’d go, causing various electrical issues. All better now, and looking great! Happy to send you a photo if you want!
Brass is the best I love the stuff hey have a good day bye
The people that installed the breathalyzer screwed it up when they removed it. That's my diagnosis, not to be confused with opinion.
Totally concur, those folks that install and remove IIDs are notorious for screwing electrical systems on vehicles.
Yup, there is a wide gap , chasm between facts and opinions. This is what causes much mayhem in politics too. ? Capiche?
I wonder if the guy that put the last fuse block in did it for a six pack and remove the breathalyzer just an assumption on my part hey have a good day
@@michaelpressman7203 Most likely, I would have just drunk a six pack and remove it myself though then head to the bar.
What's a day with Ray without a Silverado needing saved.
exactly....
I'd be pulling the insulation back on that terminal and checking the state of the crimp. Melted parts on a fused circuit are rarely due to excessive current, more likely a high resistance connection.
I agree. That could have been the original problem. Crimps DO fail high resistance. As in - big-ass heater.
I was going to say the same thing. Many years ago, I was called to a generator that had tripped a breaker. The breaker was a 1500A 415V 3-phase breaker. It was a BIG generator. The draw from the generator was around 900 amps/phase. The cables had very large solder-type lugs to terminate them to the breaker. One of the lugs had dumped all its solder and dropped a phase. (LOTS of overloads to reset on motors). I took the breaker apart and found that the resistance from line to load on the offending phase was 1 ohm. The others were something like 0.08 ohms. I pulled the breaker apart and resurfaced the contacts and put it all back together. Resoldering the lug was a pain in the rear end.
The problem wasn't an overload. It was a tiny bit of resistance that shut down a factory until I fixed it.
@@achillies40 nice troubleshooting...I was an industrial electrician in a steel mill for 37 years...seen it, almost, all lol
Well a resistive load restricts current flow and turns it into heat. In a high current system like in automotive applications this means that any unprotected circuit will eventually melt weaker components across the restricted path of current.
@@SWATT101 Nice to meet another Industrial Electrician. I specialise in breakdowns.
Wish more mechanics were as thorough and honest like you.
I don't think it's so much an honesty issue as changes in technology, hybrids, electric power,start stop features,very hard to troubleshoot ecm controlled transmissions and transaxles for an example mechanical or electrical failure, could in be a bad speed sensor,a speedo cluster,wrong fluid or low fluid?
The skill set to tackle accurate trouble shooting takes experience and proper scanners which cost to of money to acquire and you would still have to pay for updates for the scanning tools and those are not cheap.
Then tools themselves are a chunk of change.What I trying to say it's no so much an integrity issue as it's a matter of skill for the sometimes immense difficulty to find an exact diagnosis among many possibilities.
Something similar happened on my 2016. It just wasn't that bad. Smelled it within 100ft, turned around, opened the hood and saw that the bolt was loose on that same terminal, tightened it and it's been good since
These diagnostic videos are my favorite. While I like the straight repairs, its more fun to watch you troubleshoot.
Before hooking up that new battery you should have checked those 3 cables for short to ground.
nope...
@@TheAsklan Well, some like to just wait for the giant spark when they touch the positive to the battery- like it's July 4.
@@oldschool1993 Agree, common sence to check prior to any reconnection.
Ray seems new to electrical diagnostics based on several videos.
In effect he did by checking the Amp draw. His method is much faster as it checks all the lines at once
I'm impressed that he pretty much had it repaired before he put it in the bay.
Often times, heat build up is because of high resistance, not always high current. Checking the connectors on both ends probably would have been a good idea. Plus, you are braver than I! I would have checked all those circuits to ground before I reconnected them. Peace ✌️
This 👆..high resistance connection can cause over heat conditions anywhere in the circuit and is not able to be fuse protected.
@UCzjspTW2I4ZpnXsxenY3fFQ Higher resistance means more voltage drop, and voltage drop times current is power lost to heat. Current can stay the same, but if voltage drop increases, more heat will be produced.
Ohm's law does not apply to HRCs (high resistance connections) because they are basically using air space or in some cases semi conductive corrosion to bridge the connection and that is where the heat is coming from due to arcing. This is seen a lot in high voltage applications and even in residential connections. Connections have to be tight or they will get hot.
High resistance can also be the cause of an inadequate torque on the connections. You want adequate conductor contact to avoid this.
@@technicalprecision8651 When preventive/predictive maintenance was in vogue folks used infrared cameras to look for hot spots. Now they look at Mean Time Between Failures and the odds of the plant being shuttered instead of wasting money to fix problems before they fail.
That's a nice shiney ring to melt into your skin.
it only hurts for a little while.....
113th! YIPPEE! BOY HOWDY! GOOD MORNING RAY! BREATHALYZERS ARE NEVER OK! WILL MESS WITH WIRING IF NOT INSTALLED OR REMOVED PROPERLY! I worked in probation and parol, and had clients with big problems happen with breathalyzers. Roger in Pierre South Dakota
Battery terminals all shiny.....no problems here! Thanks, Ray!!!
One of two best repair channels (my opinion) I watch. Very informative and educational. SMA is the other. There are many good ones.
Thank you for your videos. My family's mechanic was a very close friend, and unfortunately he is no longer with us, but the silver lining behind that is now my family and I watch Rainman Ray's videos. You help fill a gigantic void in my nephew's life, and for that I can't thank you enough.
13:25 - The exact moment we answer the question: “but how did the third terminal get melty-hot too without the vacant one showing any damage?” 🤣 The last guy had the same thought. (You know… the guy whose arthritis prevented him from tightening any of the bolts down.) Another fantastic video! Thanks for letting us tag along.
My father is one of those people
He gave me one of his bikes to look at why it wasn't running right
I swear not a damn bolt was tight had air leaks everywhere he had been
Brought him a 1/4" digital torque wrench and told him it's not tight until it tells you it's tight!
I come here for your superb expertise Ray but the main reason is your phone impressions, even my daughter loves it😊🇬🇧
Ray, I have the Milwaukee stubby impact too, and after a week of using it I removed the belt clip. Surprisingly, it made a big difference in handling! I didn’t realize how much it was getting in my way until it was gone.
If I use the Bell clip my pants would fall down so I understand why you removed it hey have a nice day
As a stereo guy that gets blamed for any issues the car has after I work on a vehicle until the end of time....I feel for the person that removed the DWI lockout devise mentioned in notes at beginning of video...sounded like customer was blaming that person
The blame game and alcoholism go hand and hand but someone hacked that thing up…maybe the customer got drunk and started the uninstall himself.
It's the old mentality you touch the vehicle you broke it even if it's a mechanical problem on the other end of the car and it's totally unrelated hey have a nice day bye
@@craiglyles4755 I've had people literally come in and say the unit is faulty and causing false reading with an open beer in the car and half a six pack on the passenger side
I have made negative comments about your Channel now that I’ve watched your Channel for several months and I STAND CORRECTED Your a top notch mechanic 👍🏾
Open minds can be changed with new information.
@2:00, gives a new meaning to burning up the road/highway.
As a dealership tech, I usually shy away from anything involving issues with an intoxalock or removed intoxalock system. If you’re not careful, you can get yourself into a lot of legal trouble especially if they aren’t supposed to have it out of the vehicle. Typically that system has to be worked on by a specific place and if this happened after they had it removed, I’m tempted to think it was removed illegally. I wouldn’t think that the people certified to put those in and take them out would mess it up this poorly to where it’s borderline electrical fire…
Unfortunately i had one. Regardless they are absolutely certed to take on vehicles and if you fail to mention during your install appt seemingly small things like its a hybrid they kick it until correct info is obtained. They are trained pros installing and uninstalling them. And have all oem vehicle info before you come in to ensure electrical install is up to snuff
Ray you need to release a doodly doo notification sound and a doodly doo answer the phone ring tone.
I love the fact that you are not afraid to tackle a job that started with another repair job. You are the doodle I dooo guru.
its not a valid repair without at least one doodly-doo
Every morning now at 11am(UK) I think to myself " I wonder what Ray's doing this morning"
Just in case it does it again, I would have put some sort of heat insulator (maybe exhaust wrap type stuff) between the terminal and the battery to at least save the battery from damage if it were to happen again. And as someone else mentioned, SMA had a corroded ground strap to the frame that affected the power steering. I would be suspecting the power steering if it's drawing too many amps (although you'd think the fuse would blow). But to have it happen twice, I would not let it go until the CAUSE of the heat is actually found.
All my mornings start with rays repairs
That "weird" noise sounded like "The Jetsons" just flew by. Yes, I remember The Jetsons. Good Video. Thanks
Hi Ray, as a suggestion you might be interested in a current clamp meter. Maybe it is something to get your job done even more efficiently.
Agree with most on a loose connection however, having happened twice leads to a possible "intermediate " condition.
The fact that an interlock device was just removed adds unknown variables. Would be nice to know if the first one melted before or after the interlock.
I couldn't see in the video but I hope those connections don't rely on the plastic carrier to maintain their clamping force. Seen the results of that before...
interlock camp here. the customer even told him it happened at the same time. sometimes i worry about that boy (ray)
All of it could have been the result of an attempt to bypass the interlock at some point in time.
I've had an interlock at one time in my life and my newest girlfriend has had one recently and I e found that those devices cause a lot of harm to the battery due to constant draw on the battery. The constant draw paired with a bad connection could definitely cause that.
@@108gk good point and if you noticed the wire that was off was the one going to the starter, the same wire a interlock connects to
Check the ground strap. South Main Auto just did a video on one of these GM rigs with wonky electrical issues that dealt with power steering. Turns out it was a ground strap corroded. This was a 2019 Chevy pickup he worked on.
High resistance which you overlooked. That truck will be back with the same issue.
Morning Ray hope you're having a Great day. Love your videos
I would check the alternator output voltage at high engine rpm. …In fact I would stake my youtube trained mechanic badge on it 😂
i dont think thats it, i think its connected at wrong terminal. alternator power going through that fuse instead of bypassing it directly to battery... ive made a few comments about it, check if i am right. if i am it will blow again
Wow, 4K and HRD looks so nice, Please do more video in this format.
At half way through video I suspect alternator prob previous and or currently but now aft learning it has elec steering I can see how it leads into having ground issues etc ...I'm so glad I'm retired and not dealing with such ignorance as elec steering and throttle etc .. the auto industry has tried for a super long time to push out the small garages etc..... and they have nearly succeeded God help you guys dealing with this pure junk
Mr Rainman... you inspire me as I'm a heavy mechanic... but a volt drop test can positively assure that the terminal in question, is faulty rather a scan and bam.. love your work and uploads u boss and I always refer to your vids when I'm in a bother.. peace ✌️
It is always a good sign for a mechanic to see that they have good tools. The thermal imager from Snap-on shows that you are buying good tools. And use them. I love watching you and other mechanics on CZcams. I have learned so much. Keep up the great work, we are watching.
NICE Ron White “satellites linking up in outer space” reference!
The hole in the battery explains the no Power lol noticed the positive was super loose on the terminal @Rainman Ray's Repairs
Good morning Ray thanks for the video. I can't believe all the electronics in new vehicles 💯. It takes a skilled technician and specialized equipment for a proper repair. Good thing the owner of that truck came to you ✌️. Have a great day 🇺🇸
Did it smell like booze when you opened the door?
What us old-timers did to find which circuit was causing the problem was to connect a 12 volt test light between the battery and one of the main leads. Remove all of the fuses in case there are multiple problems. Replace them one at a time until the light illuminates. Replace the remaining fuses and troubleshoot the ones that light the light.
I think ol Ray already had that deal covered.
Problem one -it’s a General Motors vehicle
Problem 2- Wingstop has yet to open near my house
I've waited over fifteen minutes for your doo-di-do-di-doo. Awesome.
"I'm just going to hook it up over here" the mystery of the second melted terminal is solved.
I've seen this before, if someone replaces the battery on these and left the fused wires loose it arcs and melts the fuse exactly like this. I've dealt with several self/roadside repairs where they left 1 or 2 of those wires loose and melted the battery fuse block. This is more than likely what happened here.
Too have it happen twice though!?
@@chrisstromberg6527 could be the first one incompetent tech, 2nd could've been owner when he replaced battery. It's hard to say. But thats what the evidence presents itself as given the information. So that's just what one has to presume.
@@chrisstromberg6527 Ray said something of additional hardware lying about and cross-threaded nuts and bolts. Probably botched up the first time and as Ray said: The replacement unit did not come with new nuts so maybe they did not really realize they were cross-threaded and put them back on as far as they go.
it shorted for sure but the cause i think only the owner knows and he aint talking
@@chrisstromberg6527He found that one of the nuts was stripped, so I suspect that this happened when they replaced the battery before and is responsible for it happening again!
I'm pressed with Ray driving the truck into the shop with the hood up.
9:09 with so much wasted space under that hood, they still have to hide the battery.. great engineering !!
Check the body/frame grounding strap under the passenger front wheel well. There is another shop I’ve seen that diagnosed a similar truck with weird electrical issues and that strap was corroded and not bonding properly. That could help explain the high resistance across the circuit t6at overheated.
Connector loose once I can concur but twice leaves me scratching my head. What's also surprising Ray is the lack of any nuclear trouble codes generated for such a catastrophic electrical event.
The reason it was twice was likely the stripped nuts, which then didn’t come with the second unit so they used the same stripped nuts, and got the same result!
I=E/R as they say, not just a good idea, its the law. That nice patina of carbon black left on the burnt lug from the first failure, coupled with insufficient torque on the stud during the repair, could easily account for the spiral of events starting with heating to the point of softening then melting the plastic of the block, escalating to total burnout. Great fix, love your videos.
Yep. The voltage drop across a loose connection can be easy to measure, and similarly you can measure current with an inductive ammeter without touching the connection. The power loss at that point is simply i*V. Those Joules have to go somewhere, they end up as heat, which increases resistance, which increases power loss, spiraling out of control. Worse yet, the downstream device often doesn't do well with reduced downstream voltage, meaning it stays on for longer, increasing energy demand, and maybe even killing downstream connectors and devices. Because current may actually be reduced, no fuse will help that.
@@spelunkerd The classic case of the power distribution panel saving the fuse!
These HDR videos change my brightness when full screen, really impacts viewing pleasure
My opinion before starting engine
Something that always scares the dickens out me with those batteries
Dropping the support bar that goes across the battery terminals causing things to melt
Video mark 19:42
That is my educated guess at this mark
I was gonna say Eric came across the assisted power steering issue last week on a 2019 model. Turns out it was a badly corroded ground strap behind front passenger wheel.
hi ray have you checked if the ground connection is ok. I've seen a new car burn because of a bad ground connection. Crusty cable maybe. I am an Electrician and have seen many things destroyed by a bad neutral connection. i like your videos. good and honest work
I agree Ray surprised there was no fire when the heat burned through the battery @Rainman Ray's Repairs
yep, loose connection would be the #1 guess on my part too
but you didn't drive it to see if anything changed while driving.
that alternator output at idle being 14.8 is within the high end of the spec but i might of driven the vehicle to see if that could of been an issue do to a possible regulator problem in the alternator.
but that's just my thinking...
from all indications though, knowing someone else had been working on it, the most likely suspect is a incorrect prior repair.
some guy in a hurry, not tightening down the connections good enough 😁
14.6v is the general upper limit for lead-acid - after 15v, some electronics can fail or cause undesirable function.
My guess, as an engineer for an electric company is the same as yours. Loose connections can wreak havoc on any equipment associated with the loose connection.
That absolutely makes sense, once.. To assume the same cause for the 2nd failure which was identical to the 1st is getting perilously close to what we used to call in aircraft troubleshooting "a truth trap" .
@@stevewhite3424 the only way a battery, terminal burn like that is if you go positive to negative. its no loose terminal. thats what happens when ur drunk and forget how the wires were hooked up
@@stevewillard9836 Loose connections cause arcing which cause a lot of heat thus melting things
Maybe it was the same engineer that work for Chrysler
Great to be back ,missed your presentation.
i agree with you and at this point all you can do is tell the owner that they need to watch it to see if it happens again
A little off topic but man watching all these “older” cars come in for repair makes me feel old as hell. The youngest vehicle I’ve drove is my Ram 1500 , 03. Never pushed the button to start, no back up cam, no electric power steering etc etc lol. When I ordered her it was for specific reasons like reliability, basic straight forward design as well room to work. Thus making the labor hours less and ease of repair tolerable = savings in future repairs. She’s a 1500 extended cab 8 foot bed small eight 4wd with that 5 speed automatic transmission with 60,000 miles. Had many people trying to get us to sell as well as compliments. Thus when I saw a Jeep out front of my house then this guy lurking around the truck I was like again ? So met the fella and he’s from dodge and brought up the airbag recall. So all things aside next week dodge is coming to the house to replace airbags. Kinda curious how it all works out as well how they deal with the cracked as hell dash dodge refuses to recall. If anyone is curious I’ll shoot some before during and after video.
Have a feeling the dash will fall apart during the procedure 🤔
Anyways … another entertaining and great video. Mechanics like Ray are hit or miss.
I agree with just about everything you say but I have to add that those backup cameras are pretty handy.
Cool story I guess
On another subject, that's the worst unsafely designed fuse setup, im surprised in the US They've not been sued. It's crazy to see a source of spark on top of a battery acid bomb
While I agree, it likely was safe before some moron started messing with it. Hell it might be a sealed battery so it may be super safe, or was until some moron caused a hole to melt through it lmao. It’s no worse than fuel lines running right next to E-manifolds. They’re safe, unless for some reason they fail. Then they’re super not safe.
@@hunterramsey3132 rule of thumb. Always assume there's a numpty/idjit to make these kinds of messes. So never put a source of spark on top of a bomb.🤣
@@iHelpSolveIt That is a very good point. For that reason, if I were an automotive electrician, I wouldn't let that leave the shop under any circumstances
@@zBrainlezz Oh? You'll do what exactly? Hold the car hostage from the owner? Do an unrequested repair for free? Don't ride the horse too hard there white knight.
@@zBrainlezz agreed, however to give Ray a break, i doubt the client in this case would pay to move the fuse plate to the other side. Easy job once you figure out where the fuse plate has to be moved to. Honestly i don't know why the manufacturer didn't put a fuse in-line for safety. That said given they put it on top of a bomb🤦♀️🤣🤣🤣.
Lol perfect timing "The question I'm bouncing around in my mind is DOOO DOO DOO DOO DOO" 🤣🤣🤣
I appreciate you uploading in HDR
Just wanted to let you know, that watching your videos has given me enough courage to install my own power tailgate in my car. And yes I’m a girl 😉
Tailgate? Your car is a station wagon? Don't see many of those any more, seems like everyone wants an SUV (or a hatchback dressed up as an SUV) or a truck.
BtW, good for you! Tools are gender-agnostic.
It’s an SUV. I just call it “my car”
@@staciearrigo6741 Ah. Most of those have liftgates instead of tailgates. I don't know why. Older people have issues with reaching up over their heads. Mom had to tie a short rope to the inside of hers and let it hang down.
You are correct. Lift gate is the proper term. Well my issue is, I am 5’-1” tall. So……. 🤣
@@staciearrigo6741 Ha ha ha. Mom *used to be* , 35 or 40 years ago. Enjoy it while it lasts, we all lose a slight bit of height as we age. Also (possibly useless fact), most people are taller first thing in the morning when they get out of bed than they are late at night when they're getting ready to return to it. Gravity - not just applicable to the things in Ray's videos ;-).
you said a breathalyzer was removed
those things interrupt the starter circuit so id bet thats what melted that terminal
Y-E-S it is a good video !!
The 175 A alternator fuse resides between battery +12 and alternator +14V.
Might have been instructive to drive the vehicle to enact higher rpm's and then observe heating.... putting lots of load like ac, headlights, etc, on the alternator's connection.
Have seen starters pull too much amps and do this and have also seen an alternator overcharge due to grease getting on the brushes.
The second terminal that was mysteriously melted most likely happened as a result of a quick roadside fix. The cable with heat issues was moved to a terminal that was still intact thus causing additional "meltage". Exactly the same as was done @13:25 to cheat an easier way.
Hope this hasn't been touched on yet. I'd check those large gage cables, specifically the one that was disconnected, for internal corrosion. You may not be able to see it with the insulation so you can just bend the cable around, if you feel any crunching it's probably corroded. Hopefully what you did fixed the issue though.
Wow! It's a surprise that battery didn't explode
Good day to you sir. Great way to start off a day before work.
Maybe next time use the ohms setting rather than the continuity setting to check alternator wire?
ATM there won’t be much current flow on the alt wire with a fully charged battery, but if the battery is low you could have over 50 amps in the circuit, builds up heat quickly if there is some resistance.
"Check for continuity" = measure ohms, and he clearly has the meter set to ohms. He is using the multimeter to determine whether the cable in question is going to where he thinks it is, by using the resistance of the wire (If meter reads OL, he is not completing the circuit i.e. not the same wire)
Your vids are addictive and I refuse to work after getting to work until after I've watched your amazing service skills. That being said DOO DOODY DOODY DOO
Check the lugs. That wrapped cable with the blue tape on it looked very suspicious and should be inspected. Turn on all of the big loads and check again with the thermal cam.
Testing these circuits with a multimeter is tricky. It might blow up your meter's fuse. Use some headlight bulbs instead, wired in parallel and use that as an amp meter. If they light up bright, the circuit is drawing lots of current or is shorted.
Can't wait for the update, I'm going with fixed 👍
I just wonder if that loose brace bar could have been flapping about and bounced into the distribution block, causing an intermittent short, just enough to melt the terminal post? Lots of sparks and heat, but not enough current to blow the fuse.
That distribution block really needs a plastic cover.
The brace bar looks insulated enough across that spot. As long as that insulation isn't punctured or moved it should be fine.
I would assume the high-current draw that melted the terminal block and battery would be related to the electrical power steering, it is the only thing I can think of that could draw a ton of power like that and not blow a fuse. Could have been a loose connection, but for that to happen twice on two separate terminal blocks seems unlikely _unless_ the wire itself or the connector on the wire is damaged as well causing a higher than normal resistance through the wire. That would mean it is the wire or connector on the wire that is causing the excessive heat that ruined the terminal block and you would only see the heat while the steering wheel is being turned back and forth...
Eric O. did a similar one of these recently and it was found to be a grounding issue, sort of the opposite problem. A high-current ground wire to the frame down by the wheel well was corroded and crusty causing a lot of strange issues when the electrical power steering was being driven hard. A hard turn to the left or right would draw a lot of current, what Eric O discovered was a voltage drop whenever the power steering was drawing lots of current.
This damn HDR tried to make my phone overheat itself! Thankfully I'm always in close proximity with a small fan
I am not any near to being a mechanic! I absolutely hate working on cars! With that being stated my opinion is that when they removed the intoxilock (sp) they didn't do it right and burned up the parts and battery. When they replaced the parts they put everything back the was it was, not the right way and burned up the 2nd part also and then gave up! This is only my opinion like I said but it makes sense. Great videos Ray! Please keep them coming.
1:57 what a lethal setup. no way that passed any form of safety inspection.
Florida don’t have safety inspections.
As long as state inspections continue paying $10, there will be no inspection.
@@craiglyles4755 i meant at factory. thats dodgy AF
I usually feel bad for people that have to pay for these expensive repairs. I don't feel bad for drunk drivers.
The driver isn’t drunk. Clearly, they paid their dues and hopefully learned their lesson.
@@user-ln7of9gs4s The driver was convicted of drunk driving, that's why there was a breath interlock device on the truck. No excuse for it in this age.
@@FreeHat I don’t think you’re understanding. It was removed from the vehicle, so more then likely the driver completed their sentence. Hopefully they learned their lesson.
Based on your original post calling the driver a drunk driver, and then replying to my post after I said the driver isn’t drunk and they have paid their dues and hopefully learn from it, you’re not able to understand I’m acknowledging they probably got a DUI and part of their sentencing was an inter lock device. Yes they messed up, but it’s shameful to refer to them as a drunk driver and be malicious not feeling sympathy for them.
If someone gets a speeding ticket and their car breaks down, are you going to get glee from that and not feel bad for them too?
@@user-ln7of9gs4s no, because you can get a speeding ticket by being negligent. It doesn't mean you're being reckless, they're not the same and comparing the two is disingenuous. Would you feel the same if the drunk driver killed someone or ran someone you care about off the road?
@@FreeHat no one is condoning drunk driving. The point I’m making is you can’t ridicule someone after they’ve been sentenced and served their time. Why keep judging and being negative on others?
Remember the old adage: Red touch yellow, deadly fellow!
Ray, thanks for your videos. I've been screwing around in my dashboard and today my car continued to run after i pulled the key out of the ignition. Watching you taught me how to track down the short in the line to the ignition cable. You do great work.
Good Giggity day, Ray. I also love seeing your battery and tire inflation videos, doo doo Lee doo!
so strange, I can see the steering assist overloading to the point of melting, but it would be obvious, the steering assist wouldn't be assisting. Maybe whoever removed the breathalyzer screwed up and caused a dead short in the system. Curiouser and curiouser. Will it be back, will it function normally? Come back next week, same Bat time, same Bat channel. lol
95% of the people reading this have no idea what you meant by same bat time, same bat channel, hilarious.
@@keithlibner9259 I understood it, that's enough. With cable, streaming, and reruns that number may be far higher than many of us old-timers may think.
Imagine all the electrical fires when all the electric cars are on the road and just imagine them in the rust belt where wires and steel rot out and causes lot's of shorts
Eric O found a bad ground wire from body to the frame causing some issues. You are right about having a loose altinator wire causing the melting at the terminal and battery, the fuse didn't blow because it was on the feed side from the altinator. The nut probably was not tightened enough or it loosens off from vibration or torquing of the engine pulling on the wire.
Many years ago when I was an apprentice a gifted o!d timer had some great sayings: 1) not a good mechanic unless you can take something apart, make repairs , put it back together and have some left over parts. 2) he called left over parts PLO'S. YEP parts left over. Another old timer told me to keep a ratchet, an extension or two, some sockets & combination wrenches just for using on batteries because battery acid will mess up the chrome finish. Wash my battery tools off then wipe them dry after each use and keep them in a plastic container.
I'm kind of a shade tree mechanic but you found that bolt down in the battery tray I'm wondering if that bolt wasn't trapped underneath that that connector plate.. And somehow got missed twice and shorted the The entire plate out ...just a thought
good idea.....
I see the Ray has also adopted one of Eric O's trademark video features - a lawnmower constantly droning in the background!
Mr. RainMan,Very interesting, another fine job by verifying technician excellent.
I wonder if the fault was actually the battery, maybe a pinhole break or crack in the casing to begin with that allowed a jet of hydrogen to melt the terminal, but was missed when the fuse panel was replaced the first time, then the leak got a lot worse and burnt a larger hole through the battery case and the fuse panel, only this time the battery actually failed completely. I will admit, the circumstances behind this fault are somewhat mysterious.
the owner tried to bypass the interlock and shorted it out. remember the only wire disconnected was the one going to the starter