Junkyard TXL Indy Part 3. Front Suspension Fiasco! Vintage Polaris Snowmobile.

Things were going along great, until the trailing arm mount ripped off the sled!
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to [e-mail]. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q

[@nuttersspeedshop]

Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop

[@bigboresledder]

A lot of good T shirt quotes in this one.

[@timwendt6186]

Oh Nutter. YOU'VE DONE IT AGAIN!! Bravo!

[@nuttersspeedshop]

Thanks Tim!

[@triplehelper6944]

It’s always something! 😆

[@nuttersspeedshop]

It never ends.

[@buffdoc46]

Mid 70's Polaris 3 banger would be cool in the future. Awesome episode, got a lot done. 💪

[@nuttersspeedshop]

Thanks!

[@MidnightPolaris800]

Nice work gents...trailing arm mounts are a real joy...especially on edge chassis 😂

[@nuttersspeedshop]

We're working on it right now. Donor sled has donated. Tommy extracting bits from his 82.

[@MidnightPolaris800]

@@nuttersspeedshop I kinda want an 82 anything from polaris...I heard those are some rare sleds

[@alaskarailroad3996]

Nice work.

[@nuttersspeedshop]

Thanks!

[@IndyGuyRob]

Cheers guys 🍻
Looks like another cool wedge Indy will be back on the trails! Those 82-83 years are nice to see out there👍
Order up some snow already, so we can have some good test hits!!
Clean the carbs 🍻🍻🍻

[@nuttersspeedshop]

Clean Da Carbs Rob!

[@IowaBudgetRCBashers]

Another great episode

[@nuttersspeedshop]

Thanks!

[@user-un4mu1hj5o]

I hope it snows a lot next fall and stays all winter to make up for what "Al Neenyo" did.

[@nuttersspeedshop]

100% Agree!

[@rickfournier3413]

Progress ! That's awesome guy's !!!

[@nuttersspeedshop]

Thanks!

[@kevinandres5053]

What year did the rxl first come with electric fuel injection

[@nuttersspeedshop]

Tommy says 1990.5 and they were black. Mid season intro. 91 was blue hood.

[@connorsvintageelectronics909]

Whats happening with the sno jet in the background

[@nuttersspeedshop]

Future episode :)

[@connorsvintageelectronics909]

Nice i love the older sleds