Patti The Free Polaris RXL Part 2. Vintage Triple Snowmobile

Doesn't everyone change the crank seals every time they get a 30 year old snowmobile for free?
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to [e-mail]. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage

[@nuttersspeedshop]

Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop

[@chrisbishop8979]

So, I heard you mention CZcams unsubscribing people before… But you’ve always been in my subscribed list in my smart TV…, So for the heck of it as I’m watching your video, I went to your page and I had to resubscribe!… I couldn’t believe it… Thanks for the great videos! They are just long enough to get good content, and I don’t have to invest an hour and a half at a time!… Keep them coming! 👍😎

[@nuttersspeedshop]

Thanks for staying subscribed!

[@MidnightPolaris800]

Nice to see its pretty healthy

[@nuttersspeedshop]

Motor is way better than the chassis for once.

[@WIHONDAGARAGE]

Nothing like a Sunday morning nutter speed shop video.

[@nuttersspeedshop]

Thanks!

[@IndyGuyRob]

Clean the injectors guys 🍻🍻
Good video Nutter! I totally agree with you on buying good quality pullers and flywheel puller. Erlandson has always made good quality pullers in my opinion, and SLP’s flywheel puller is second to none
Glad to hear another 650 motor will be back out there and running again 👍
Cheers 🍻

[@nuttersspeedshop]

Thanks Rob! You are right, EPI makes a good clutch puller.

[@shawnbrown7448]

I wonder how many people keep their flywheel puller in the cardboard box it came in? I know I do! I had to chuckle when I saw that. Nice work guys.

[@nuttersspeedshop]

I wonder if SLP sells a replacement box. Mine is getting pretty worn LOL

[@shawnbrown7448]

@@nuttersspeedshop Haha, I have a nice used one for sale. 😆

[@nuttersspeedshop]

@@shawnbrown7448 🤣

[@Ash1978E]

3 blondes is awesome but the 3 bond can bond off. Polaris Crankcase sealant is all I'll use.

[@nuttersspeedshop]

I looked in the Polaris service manual for 96-98 and it said 3 bond 1215 or a Polaris number.

[@davedubriske9939]

Great job! Great video!

[@nuttersspeedshop]

Thank you!