Meguiars Ultimate Compound Review Fixing Car Scratches
Vložit
- čas přidán 13. 07. 2022
- get it here
amzn.to/3o1eykf
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing - Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
I taught my wife how to remove scratches with a polisher. She doesn't drive into bushes anymore.
😊
🤣🤣🤣🤣
I could see it instantly. That this was branches from a hedge or similar. Done it myself once, backing up a dark dirt road
My wife is constantly doing this to her cars. I’ve had to polish these scratches out of all her cars on multiple occasions 🤦♂️😂🤦♂️
Yes when you take a car offrode we call it pin-striping
This video is priceless 😂! I love the honesty and crazy humour. Really love your channel mate! I learn so much as a new Detailer. I often feel like a good buddy having a friendly chitchat with me
thank you m8 really appreciate the positive vibe.
I learned how to paint correct using this product back in 2010, I found on black cars it hazed and would have to do a second pass with Meguiars Polish, now to be fair I was learning, and I haven't used the compound in years. I did keep it just in case I have some old car that needs a touch up. At the time the compound/polish combo worked great for me, I probably could still be using it and do just fine. Thanks for the video, always enjoy!
Great Video Jon. This product has stood the test of time and is so easy to use. Rather than get the machine out, I fix small scratches with a dampened Megs Microfibre polishing pad and apply lightly using a number of passes until the desired result is achieved. I used Farecla G3 originally, but Megs UC requires minimal finishing with the 205, which is my go-to polish.
I’ve just discovered your fantastic channel and detailing through necessity! My car has taken a bad hit in the past week, 1. Washed while being serviced and there must have been grit on the garages sponge. 2. While at work it got covered, (every panel) in tar spots (1-5mm) as an adjacent footpath was being repaired. I am now prepping a wish list to get to repairing and the only thing I already have is meguiars UC!
Fantastic channel and methodical approach to all you do!
Totally agree with you about this compound, I did our car with this, plus followed by ultimate polish and wax, and got a fantastic looking car.
Another great video John...really interested in the Dewalt Polisher you used which model was it..?
Nice job Jon, I've used it on white and it worked very well.
I also used this product when I made my first attempt at paint correction on my car and was very pleased with the results. I think it's a great product that doesn't get the credit it deserves.
It’s a great product, been meaning to get some more. It’s one of the few polishes that I can use by hand on small scuffs and it actually leave a decent finish.
When I corrected my 2016 5 Series, the paint was rock hard, and of all the compounds I had on hand (Menzerna heavy cut, M105, and Ultimate) Meguiars worked the best. It also has very little dust, and a pleasant smell.
Great job John. Well done 👍 👍👍👍👍👍
For what they are these products (both compound and polish) are amazing. For the price, accessibility (here you can walk into any auto store and pick it up), and ease of use, you will struggle to find anything better. It just does everything well and what it says it will do and introduces detailing to the masses. Nearly anyone can pick up a DA and this polish and take to the paint and make a noticeable difference. Also, not to mention it can be used by hand easily making it even more accessible.
Interesting. I polished a Volvo once. I tried different combos during the compounding-stage. When I used D300 like a two stage-polish, first pass with 4 criss/cross motion - buff off - and the second pass with 2 criss/cross, it worked pretty well. I still had to refine it with something like SonaxPF or similar. Then I started to look for possible options in my little arsenal of products, because I was doing something like a three step combo, which is very time consuming. I kept the MF cutting pad, but switched my Meg's D300 with two dots of UC and two dots of a diminishing cutting compound with long working time - and boom - I had made myself a good one step for that Volvo- paint. I was thinking of getting rid of my good old bottle with UC before I polished that Volvo, because I thought it was too much of what we call a "consumer-style" product. I promise you, I will never throw away UC. An old lady as you say, and it is a really good product to use, for everybody, at least if this is detailing geek/freak -show is a hobby of yours 😂
Interesting 8 minutes describing the investigation and the causal factor that resulted in the marking of the paintwork.
I created a very long and heavy mark on the paintwork the same way all along the nearside, caused by brushing slow and hard along a recently cut hedgerow in the Lake District, when negotiating giving way to an oncoming vehicle on Hardknott Pass where there was no passing place nearby.
Thanks for the demo. I was going to use the Meguiar's scratch remover, but just did as you said and took my time with the ultimate compound then the polish and then the ultimate wax. I'm very impressed.
I have been a big fan of Meguiar's Ultimate range for many years and can’t praise them enough. I have always been impressed with the show piece the products create and its longevity. I am in the process of moving over to Bilt Hamber purely due to many car valeters on CZcams highlighting how good it is. I hope BH gives Meguiar's Ultimate a run for its money, in terms of value for money, creating a show piece, and longevity.
Timely 👍 Briers sticking out of hedges this time of year and painted mirror housings take the brunt. Great video.
I'll tell you right away why I find this upload very helpful!
Actually, the UC is where it all started, and for many of us, before the market was flooded with too many products that are ... almost the same.
The UC does what it's supposed to do. And for a competitive price. Then a short quick finish with the SONAX Perfect Finish ... that's all you need.
And very easy to remove oxidation manually. Just think of hard-to-reach places, bird droppings, etc.
With an LHR15 and various pads, the options are endless and effective.
Greetings.
I'm saying this before watching the video as I've not found UC to be all that great. Certainly not noticeably ahead of even cheaper ones. I bought it because of the reputation so it will interesting to see how John uses it and rates it. Maybe I'm doing something wrong.
@@terencejay8845 - Can you explain this further? And be more precise.
What exactly did you not like, which pads, condition of the paint, etc etc.
Hi John, thanks for all your videos.
Watched one of your videos on Kpch Chemi FSE because i was having some trouble with water spot build-up.
I've switched my thinking to Car Pro because Koch Chemi FSE might degrade Ceramic Coating fast. There is a great video showing this. I will link it for your community in a reply to this comment.
Thanks again!!!
Before I got in the detailing products addiction I used the Ultimate polish and compound for years... really solid products
I've got some of this at home but I must admit I very rarely use it. I must dig it out again at the weekend!
Absolutely agree, i always recommend this for beginners, even works well with a mirco cloth by hand and everyone can get it from Halfords
Definitely the best compound polish by far, tried so many and this always came out on top and so easy to use, just finished my son car with it and sealed with a wax, results Wow 😊
I've been thinking about buying this DeWalt polisher for some time l,finally got it out of my mind then I see this video and I want it again.Have you ever used the Makita polisher with forced rotation,if so has does it compare to the DeWalt.Thanks great video.
Excellent video, very helpful..thank you. I'm looking to use the Meguiars compound and polish to sort my oxidisation on my Volvo S40. I'm trying to save money - without having to pay for a spray paint job x
I agree Jon. It’s a great product and their Polish is every bit as good . Have you tried their Hybrid Paint Coating? It’s incredible
Thanks for the tip, I have a light scratch on my black sapphire paint, so I'll try this product with my new Carbon Collective Nano Hex Polisher. Some of the foam pads are badly misshapen in the box when it was packed, so is there a way to restore their original shape?
Thanks for the advice
Makes me want to do the job I have been putting off. I got a few very fine lines from arguments with the sides of the overgrown country roads. Battle scars on the Land Rover is more forgiving in my brain - like you are allowed a few tiny marks🤣🤣👍👍
"Which is okay, which is ok..that's life" 😂😂😂
I feel you Jhon 😂
Both the compound and the polish work quite well, even even in direct sunlight if you have no other choice. Added bonus, it's always available at my local Walmart, for CHEAP. These products, combined with Seal&Shine, super budget all stars of paint maintenance and protection. Great video Jon!
Another wicked combo is Seal "N Shine & TW Ice Spray Wax.
@@hartlanddetailer5670 unfortunately, the ICE spray wax isn't available retail in my area, that I've seen anyway.🤷♂️
@@hartlanddetailer5670 - There you go, Megs Ultimate Twins and the TW stuff for the finish.
Hi John great videos can I ask you about ceramics is it true they act as dust repellant I will be trying it anyway thanks
As a beginner I've found it good , got some great results .
Then tried 1 and done which I like even more .
But still have both on the shelf
Cheers Jon from Costa Rica 🇨🇷 have a good weekend
funny you done this vid, was thinking of giving this ago instead of using S20 like I normally do on my Audi S4
The ultimate compound works well also good by hand which is a bonus
Next door neighbour did the same to their Kuga, I have taken the opportunity on a few occasions to do a free repair, it gives me the practice and they get a repair for nothing, I don’t have a lot of compounds, Scholl S40, CG sample pack that came with the DA, Koch Chemie 3 grades, Mezerna, a good selection of pads. I have managed to totally get rid of branch scratches altogether, don’t remember what I used,
Really good compound to use 👍👍👍
I definitely like the Ultimate compound and polish, and the pads that go with them work well too. Plus, in Australia they are quite cheap too compared to Sonax, Rupes, Scholl etc.
Iv used it on afew cars and it's very good.. Brings the colour to life
I had the exact same looking damage, even down to the chattery bits, down the side of my black Astra J VXR once. That was also caused by a thick stick poking out of a hedge that I had to move over towards because a car came the other way. It literally managed to catch every panel down the side. Starting at the front bumper it then moved upwards over the front wing, smacked the wing mirror which sent it back downwards onto the door, carried on across the rear quarter and then exited over the side of the rear bumper.
The only reason I was down that road was to give my father in law a lift to his Christmas do and he'd offered me the use of his car, which I'd turned down, so I didn't use my petrol. It was dark at the time and I saw the stick at last minute as the oncoming car's headlights caused it to cast a shadow. I remember not being able to sleep that night and was straight out the next morning sorting it 😂
How about testing out spray compound ? think it`s exciting have not tested it out myself yet hehe :-)
Great product been using years
Quality cheap secret don’t go to quick so easy for an weekender
Just k ordered some more.
might have to give this one a try at some point, not getting on well with my Auto Finesse Eliminator at the moment, Im doing it by hand but I at least expected it to do something...
Terrific review of this product. I've used it for a while now and it definitely has it's place in my roster. What are your thoughts on the 3M 1,2,3 lineup (heavy cut, compound, polish)?
I've not used these yet n8
I’m sold… need a bit of that on my Audi. However…. I don’t have a whizzy spinny polisher… How much pressure and elbow grease should I use when using a ‘manual’ applicator for the polish?
Use ultimate compound myself on isolated scratches,can be quite abrasive using by hand as leaves lot of marring so machine is best.
Hi Jon you made me love Scholl concepts so these compounds are not for me your fault lol, have you never tried lake county 4000 pad washer, I bought one and never looked back, the only thing it could do with is a lid , keep it up matey 👍👍👍
Wish me luck my products and polisher arrive tomorrow, got to love Amazon 😂
Such a comic video dude
Can easily be a stand up gag
SOOOO relateable
Crazy!!! I’ve had that stuff on my shelf for ages and alway pick up mezerna or the pink 3000 meguiars instead, always thinking that the ultimate compound is just a glorified t cut. I shall definitely use it next time based on this Jon. It also looks like it is less dusty than the mezerna can be. Cheers 👍
same here. i didn't realise it was an all in one and have been using rupes uno which doesn't seem to have enough cut to remove heavier scratches. definitely gonna give this a go next time
Yeah Menzerna is shockingly dusty!
If dust is a concern I can tell you that this definitely will dust. I haven’t tried other compounds but there must be less dusty ones out there
I've used it a few times and it reduces scratches a little but doesn't get out swirls for some reason using multiple different pads too.
Tried to use this product twice by hand on 2 separate occasions 1 a black car and a red car both times looks awesome close up but stand back to admire my work and theres loads of marks in the paint smears etc had to rub like crazy to remove gave up used a panel wipe and a different product 🤷🏻♂️ I’m assuming I’m going wrong somewhere but really cant get along with this product never had this issue with any other polish.
Love Meguiars Ultimate Compound. Leaves a fantastic high gloss finish without the need to follow up with a polish. Tried several different compounds and find Meguiars to be the best.
Great video. I would love to know if its possible to remove small scratches from a windscreen. That would be the video for me. I hate the ones I have.
Glass polish like Ceriglas for example with a rayon pad...if you have a polisher that is. Not sure how well it would work by hand...
Yesterday I bought the cheapest DA polisher I could find on Amazon, then some 2000/3000 grit sand paper and some Meguiars Ultimate Compound.. And wow I and family members were impressed. I will be trying it tomorrow on the paint work after decontamination to see what kind of results I can get.
I would like to get some better pads for the 6 inch polisher though to see how that affects the results.
Had good results using this on my mk2 Golf Gti with tornado pink paint 😁 less scary on cars with laquer though, used it on my Nova too and the yellow pad turned blue afterwards, with golf there was a slight red tinge 😂
I've just bought (from Fartface Marketplace of all places) a used OEM six-dial facia for my 1985 Vauxhall Nova (from a 1.3SR the same age as my 1.3L). However, I can see some light swirls on the perspex surface of the screen. I obviously don't want to go aggressive, but is the Ultimate Compound ideal for dealing with these marks? Would just the Ultimate Polish be good enough?
I find meguiar's ultimate compound and ultimate polish fantastic!!!. These are my #1 on black lacquer pieces. I used several combos but it was always quite aggressive enough not to have the perfect finish. While ultimate compound with a meguiar's DA burgundy pad followed by ultimate polish with meguiar's DA yellow pad, and the finish is perfect!, I think the products stay lubricated enough to protect the fragile finish and contain the perfect cut for this substrate!. M105 & M205 where M110 & M210 work well on black lacquer but don't get the ultimate finish! Maybe still too abrasive and less lubricated?!. On the other hand on body paint my favorite combo remains M110 & M210 see M205 if I want a little more bite on harder paint.
this was great!
If you can’t get your nail in them, wet flat using 2000’s then 3000’s on a block and Machine polish with some cutting compound such as 3m Fast Cut Plus. Bit of polishing using a waffle head and your choice of finer cutting polish to help remove swirls and BOSH! Job done my friend.
Most clients have no clue about how much time it takes with this process...
"Omg it looks beautiful! - it took how long?" hehehe...
Very nice work here...the process CANNOT be hurried.
Meg's Ultimate is a pretty decent go-to!!
I have this product myself it’s brilliant 🤩
Edited- I literally typed "has she driven through a hedge?" Just before you mentioned it 😁😁
Does she watched your videos??!
Have you done any vids on taking care of cars with factory matte paint?
Jon it would be great to you rescue a cars paints that is worse than the golf. I think the video would do well too! I would love to watch to a full paint correction on this motor.
only realising now that his is an all in one. i've had it months and thought it needed to be followed by a finishing polish set so bought some rupes uno which is decent but doesn't give enough cut to remove any more than light scratches
I just knew you were going to say a bush, I did exactly the same thing the problem is my car is ceramic coated and try as I might the scratches will not go as the coating is so hard and the scratch compound (not meguiars) does nothing with hand polishing, any ideas what else I could try. or do you think the Meguiars might be better, have you ever had the same problem with a coated car yourself?
I had a huge scratch along the side of my Mk1 Puma once, it looked like someone had gone down the side with a pound coin from the rear quarter to the front wing, that’s not nice because you can get it repaired only to have it done again. Then, a while later ( months ) whilst in my study I watched the neighbours kid and his friends wobbling around my car on their bikes. Later I had a look and the scratch was at the correct height for handlebar damage. 🤬
Hi what pads did you use with the compound?
Thanks
I used this quite a lot when I ran out of Autobrite Direct compound, I wasn't that impressed at all to be fair. That doesn't take away that you have great results there.
Can I ask what amp hour rating your De-Walt batteries are please?
8:50 I do exactly the same haha, sniff test. Funny how we are all the same... Great video, like the back story too, brilliant work 👏 👍
I really like Meguiar's Ultimate Compound, it's really good for how easy it is to use... I guess it's an equivalent to Scholl Concepts S20.
Hi John was that a toothbrush you used to clean the pad just looked like one sill thing to ask I know good video mind the gases haha
Buy a rupes claw m8
Chris Fix uses this.. if its good enough for him its good enough for me!
Jon, I used this today remove holograms as a polish stage after a heavy cut.
Does this product need a quality wax or sealant after!!?? Thanks
It needs a wax yes m8
Meguiars products do work, and work well. Its just I don't like paying the money for them. i recently bought a megs drying towel, the big yellow one, not the new one (i had a gift card, so meh). Good product, nice drying , just soaked up water and never stopped.
Hi Jon thank you for another great video. I wanted to ask I attempted to get rid of a scratch on my boot and managed to do a really bad job using 3000 and 5000 sand paper following a video on YT. I’ve been told that the best option to get rid of the haze and scratch is to get a DA with Koch Chemie H9 and F6 would this be the best option. If you can let me know I would really appreciate it and thank so much for your knowledge and guidance you have made into you 😂😂😂😂
Yes m8 h9 the haze out with coarse pad and some pressure. . Then finish out with m3 and finishing pad. But I don't know how much clearcoat u have left.
If by “bad job” you mean the scratch is still there, it may just be too deep to get out. Past the clear coat maybe. 3000 is pretty mild though and you may just need to step up to 2000. Just make sure you take it slow and don’t cut through the clear. Then you can refine it with 3000 and 5000 and any polish should be able to clear up 5000 marks
Hi Jon, You said you’d just cleaned the car beforehand, was this just a snow foam and shampoo or did you do any sort of decontamination before polishing? TVM! 😎
I don't think I clayed
I used this today, bought it last month to do my black corsa! It did dust up & didn’t remove a lot of fine scratches I expected it too. Did remove all the spiderweb scratches. 6/10 from me.
it didnt rank too well in my abrasive video either but whenever I use it for stuff like this I find it pretty good.
I had this swore someone had run something down the entire side of my car polished it best I could few days after same again polished it again then found a single bramble sticking out af a hedge (single track road) on my way home from work at speed you couldn't see it
Would anyone recommend using this by hand? Maybe not to the level of scratches on this Golf!
Anyone know what pad was being used here? Sorry if I missed it?
So after the compound would you not need the Ultimate Polish Jon. Cheers great series
To refine it more yes
@@ForensicDetailing thanks Jon.
Hi!
Representatives in my country say that you can not use as I want: Ultimate Compound and after the application of ceramics, but I insist on mine) they recommend using hard clean polishes, but I'm afraid to erase the varnish🥲
Can you please tell me if this polish is suitable for removing minor scratches and after applying nanolex ceramics? Is there silicone/wax and other nasties or is it still a regular fine abrasive polish?
Thanks, sorry for my English.
you really have to ask maguiars whats in it mate. But as far as I know its a pure abrasive so you could use it to buff paintwork, then degrease it, panel wipe it and coat it. but check with megauirs mate.
Hi what pad did you use/ do you recommend with Ultimate Compound?
Flex purple m8
Hi what results would u get if I was to use Polish pads/cloth not a machine to use on the car
Lakelands
Some swear by MPF, perhaps the Golf needs bubble wrap ! [Mrs protection film]
What pad is that. Is it The lake country orange light cutting pad. 🙏awesome work 🫡 to you.
I think it's turtle Wax which is like the lc CSS pad
Damn you must of read my mind I'm just about to get some of this to try for the first time 🤣 also my first time machine polishing
I’d recommend scholl concepts it’s better s20 black or s17
As I posted here before you can buy another small bottle of perfect finish and you're good to go. Rupes yellow toad, CG Orange, etc.
You can't go wrong with the UC, absolutely not.
Can this product be successfully used by hand on piano black plastic exterior ‘B’ pillars??
digging out any scratch by hand is hard but yes m8
Was under £10 yesterday on Amazon 👍
I knew exactly what happened as soon as I saw it Jon 😂
Wouldn't you think that your missus would know you long enough by now that she couldn't get car related stuff past you 😂😂 so funny that she owned up as soon as you said you'd ring your sister.
What would to put on this to protect it after the cutting work?
A wax or sealant m8
A great produt
Great video John,but how does this product hold up to something like one and done from turtle wax,especially on black paint...
See best single stage polish video m8
It’s sad, but I know some shops that would wet sand and buff those out, but charge customers for full refinish. 🤬
Ultimate compound is good , I have compounds 4 times the price which aren’t any better , ultimate polish is good too
My OCD can see a small dent in rear fender. Only me that sees that? Good work btw :)
Can you cut by hand? I understand it would take much longer but wondering if it's possible.
its not viable but yes you can mate.