Banks Power Boost Tubes & Banks Intake on my 2022 Chevy 3500 Duramax High Country
Vložit
- čas přidán 6. 08. 2022
- Take a look as I put on the Banks Boost Tubes and Banks Intake for the 2020-2022+ GM 2500/3500 Duramax Diesel Trucks & share my thoughts on the setup. If you are interested in any products in this video. Take a look at our website links below. We are an authorized Banks Power Dealer.
Stay tuned to see many more aftermarket products make their way onto AmericanDuramax 2.0 in the near future! if you aren't subscribed, you'll want to do that now!
Banks Intake
scovelmotorsports.com/collect...
Banks Boost Tubes
scovelmotorsports.com/collect...
Banks Derringer - iDash - Pedal Monster
scovelmotorsports.com/collect...
2020-2022 Banks Ultimate Package
scovelmotorsports.com/collect... - Auta a dopravní prostředky
I have the same setup on my 2020 GMC. The boost tube connections are definitely a week point in the set up. Blew one apart on the driver's side. You have to crank those clamps down as tight as they will go and then keep checking them.
Having to install the gasket on the air box is also not something Banks should leave for the purchaser to do.
Great info. Thx for keeping it real.
I appreciate that, I honestly try to keep it as real as possible
I have done all of Banks upgrades also. 2021 GMC Denali. (Also Blue). My boost tubes blue off twice until I finally got it right . Love my truck.
Yeah they can be tricky! That’s awesome though. I’m glad they are working now & you cant beat this color!
What do mean you got right this time? It would be nice to share, I tow 18k 5ver and it would suck for it to pop while towing.
@@americanduramax I have a silver 2020 high country, I love my silver, but blue is nice too.
@@gleanerman2195 That's awesome! The Silver is nice too, i really liked it with black accents
Awesome video, Just found a channel we also just purchased a 22 custom diesel. Noticed your SoCal 🍻 I’m in Yucaipa.
Yes sir! I’m less than an hour from you 🙌
Awesome real world review and after
Impressions. It’s unfortunate you had some install pains with the blow out and subsequent ECM issues.
But as anyone who wrenches knows, stuff happens. It’s funny looking back at the little things that are forgotten or glossed over during a first time install of a new product-vehicle combo. Something as subtle as the feel of torque on a single clamp can be the difference of maximum performance, or a blow out.
But now more and more people know how, and that’s good for everyone.
I appreciate the feedback 🙌
That’s definitely what i wanted the take-away to be. “Hey don’t wanna be like that guy on CZcams” lol. And double check those clamps are tight so more people get it right the first time haha
Does the banks tuner support a 4-5 in straight pipe? Without codes or check engine light? Thanks 🎉
@americanduramax You've had this installed for a year now. Any thoughts on the whether you would do it again? Improvements you've noticed? Issues?
Just curious if you ever put the monster exhaust on your truck
How are you liking the intake? Think it’s worth the money? Did you have any issues with throwing codes due to mass module?
the intakes been great, i really like it. no codes or issues from the module at all buddy
Nice Chanel!
Thanks buddy!!
What do u think of banks ?
How’d you get all this in Cali
At only 249 miles?? I love it
Hahahaha thank you! I know i got a few screws loose (in my head) lol
Great video,I purchased banks power Boost tubes & banks intake for my 2023 Duramax 6.6. 1/14/24 and I read lot CZcams comments and they have checking engine light on. Im still thinking if I want to installed and have the same problem,your video is over a year old how’s works in your truck you have any problems at all? Any tips helps thanks
Ruffles, I tell you what I want to get these but I have seen So many videos where this happens. If you get them on and have problems, I’d like to know. Running a 2022 High Country L5P.
Wish I could afford a diesel someday, its crazy just how expensive they got :/
like overnight too. 100k is normal now for a high end diesel. its ridiculous
Beautiful truck
Thank you!!
@@americanduramax did you go with dry or oiled intake?
Oiled buddy!!
@@americanduramaxthinking of grabbing for my at4 how you liking so far ?
@@gt3001 i’m really happy with the intake & boost tubes so far. I’d do them again for sure
Curious now that you’ve had the air box and boost tubes for a few months, how is towing the camper? Any improvement in mileage?
Hard to say, I like the way it drives better now towing and unloaded. About 1 MPG gain but that's even hard to say without doing a controlled test.
Really drinking the Banks Kool-Aid, eh….hope it all works out!
So I've seen some comments that people have made regarding "getting it right" after having the tubes blow off twice, which is exactly what's been happening to me (3rd time just today), so what did you do to get it right? It seems to me that the tolerances are so tight that unless you have it up on a lift and can take apart some of the surrounding equipment in order to ensure essentially a perfect fit, they're just going to keep blowing off.
I just really cranked mine down tight and that did the trick it seemed like.
They can be kind of finicky to get installed
I put the cold air intake on my 2020 duramax and now showing a check engine light, code POOC7, and in limp mode. This happened the second time I started it.
Did you get the revised sensor module? they make a "version 2" if you will
Just turn off your air filter in the Dash control. Clean it every oil change and you'll be fine
When you put this equipment on for the banks Derringer does it make your truck go faster then 98MPH
no it doesn't unfortunately ; you can do a few things to add on being able to go faster but as of now, you cannot
@@americanduramax yeah these baby maxs are kicking my ass with no mods
Looks like you tow a 5th wheel camper? How was towing after all the mods? Fuel economy improve while towing?
Haven't towed with this lift kit yet, but i will soon and be sure to note that in the video!
These trucks have a intercooler correct? Has anyone upgraded it to get cooler charge temps closer to ambient?
I'm not sure about that, Intercooler upgrades were popular on the LML's and other years of Duramax but not much talk on these yet. I dont think the companies who make them for these trucks have made them yet or they just haven't taken off yet in sales.
Where were you able to order the custom pod for your iDash? I've been looking for my iDash for my 2021 Denali HD.
Yes sir; i have one left in stock on our website scovelmotorsports.com ; if you order it now, ships today buddy. If you have any confusion, reach out to me on the contact part of the website and i’ll respond within a few minutes. Fits perfectly 2020-2023 GM HD trucks (chevy/gmc)
Did you ever get your pillar pod? I have a 2023 silverado 3500 HD and am looking to get a pillar mount with 3 gauge holders in black
@@americanduramax I forgot all about it with everything else going on. I would still like to get the custom single custom pillar [pod, but did not see it on the Scovel website. If you still have one please let me know.
Do you have any vibration in your gas pedal now that you’ve installed the intake?
Low RPM’s i feel the intake do that slightly at times. Feels more like a growl to me though
Ok definitely isn't just me. Makes me know that's normal.
@@fitnnerdy is it normal has it been brought up to banks?
@@joeb.8625 I have no idea if Banks knows about it. It definitely makes the engine a bit louder/growl, the old resonator is to make the engine quieter so it makes sense it might cause this.
mine sounds good its a growl
I added Banks to my LML Duramax and my performance went down.
I can't speak for the LML, We sell a lot of Banks for the L5P platform but not so much LML
Thinking about taking all my banks stuff off. It’s once a week if not more that it throws the check engine light. Put a scanner on it and shows no codes. I’ve put 10k miles and it’s been more trouble than it’s worth. Regret buying any of it
Nice! Did u notice more turbo noise with intake?
Yes sir! Which is nice since you can’t get any exhaust noise out of these trucks
@@americanduramax ya to bad I’m sure it would sound amazing with a straight pipe
@@curtbernard755 oh for sure & as my channel grows, it makes me not sure if I’ll do it because you never know who’s watching
@@americanduramax ya for sure I get that I’d do it now while your still growin the Chanel my friend. Do it for the boyz
I see you have the original shock did you get the recall on them?
I got rid of those shocks a long time ago buddy. I threw them away. I heard about the recall but many just buy Bilstein 5100's from us to replace them anyways.
@@americanduramax I waited a whole 24k miles before the stock ones were leaking so I also switched up to the Bilstein 5100's. Night and day over the stockers.
any issues with the trans?
Nope; nothing so far
How were MPGs affected
Slightly increased it seems like so far!
why not edge pulsar v3 ?
I really wanted to try the whole banks package. Monitor egts, mpg, regens etc first before i try edge products to compare
Edge pulsar v3 that junk smoking dpf not good derringer best Option
Does it void warranty?
none of this should void any type of warranty. the dealers i have worked with over the years seem to understand this too.
for example. an larger intake filter isn't the cause of a failed transmission. typically this seems to work out just fine
the short answer is leave the truck stock if absolutely don't want to take any chances
Dude.... larger hot & cold side pipes will never give you faster spool up. That's not how it works. That's not why you would do it. But I'll digress.
I would assume it's for lower EGT's right?
You are wasting your money buying premium DEF it's all the same shit.
It’s actually causing issues with these trucks when running platinum. I haven’t had problems but I switched over to the regular stuff ASAP.