Video

What width is it..Cheers

Hi, copying your wall cupboards as very professional and just received my polyvision window. The sizes quoted are the actual cut size and include a 4mm allowance, but thanks for the warning. Love idea of using the frame to template the outer panel.

Hello, I have an H3 van and I'm trying to work out whether I put the awning on the side (F45) or on the roof (F80). I have a tall Vango drive away tent which says it's height is 255-295. I'm worried putting on the side like in this video would be too low. What would you recommend please? Thanks

I am curious if you needed the hot glue and how that worked out?

Very high quality video. Thank you.

Diy camper builders all seem to go down a black hole when it comes to insulation Inc you Let's put this into perspective No van or campervan on the planned is air tight Not one, if that was the case, People would die from a lack off oxygen. And with every justification to insulate. I can counter that argument because no one touches the cab area That's a 3rd off most vans If it was ubba critical to have to insulate or prevent heat loss, moisture etc etc at the back, why does that go out off the window when it comes to the cab Taking a realistic approach is something I've not seen by ANYONE

Still here only got it after four years no vacation, and got it only once, my friends have all had all the jabs and had covit twice or three times one mate had all the jabs about five of them and had covit at least three times , and remember by the time you found out that you had it , you were still going to shops etc , giving it to others.

This is an amazing video Watched heaps of bs videos but this video is real And a quick question here about the master fuse, on 4:48 What does it call? What should I search on google to find it and what do you mean by the appropriate fuse size for the battery size?

Thanks very much!! Great vid

Very informative and useful video! Please could you tell me how long you left the soudal carbond to cure before continuing with fitting the window? Cheers

Looks fantastic hope I can match when I start mine soon,have you got a parts list toilet ,sink tambour door

That's the right decision. If using in the winter get a dehumidifier.

2 years ago we converted a brand new Iveco Daily L4H3 which we now live in. That wasn't the plan originally but after two 90 day trips to Europe we hated being in a house. We stop warm air from touching cold metal by sticking foil bubble wrap to every inch of metal on the inside. We then insulated it with wool. 2 years on, a season sking in the alps and 2 summers in 30 degrees plus and we would recommend that method to anyone. We have no damp and the only condensation we get is on the windows of the cab.

Any issues with the angle of the roof? Some people have said you have to use specific brackets given the lean on the upper side of the roof (i.e. it leans inwards). But then I can’t see any H3 ducato specific brackets on fiammas website anyway

Can i ask you your experienvce on those Thule Cab locks? - i have found very little review out on tinternet about them. Do you think they are effective if say a window is smashed would the internal cab lock being a keylock prevent an intruder easy egress again, only the smashed window being available.

Where did you get your door catches if you dont mind shareing

why don't you use the cigarette lighter for the dc dc charger as a relay, I see pointless all that work destroying cables from the ignition system, and all the work involved !

A very compelling argument and perfect timing for me to stumble across it, cheers dude

Very nice

Anyone know where in the Netherlands or Germany I can order these blinds? Thanks

Hi Did you bolt the seat to the floor befor pir boarding and latting then fill in the seat floor after or go straight through, im wanting one to go at the back of front passenger seats to join and create a corner sofa

Tad and smidge 😂 brilliant

Hi, do you know which episode tackles the over cab storage area? I would like to watch it as i'm struggling a little with mine.

question: if i dont want an automatic and immediate start of the leisure battery charging but i want to acrivate the DC/DC only when i want, can i take to the d+ a cable coming from a manual switch put between the engine battery and the DC/DC ?

Great video, thank you. We are currently fitting our tambour door to our shower cubicle in our Boxer, and are similarly nervous of cutting the door! Can you tell us what blade you used on the jigsaw to cut the door please?

Hi, any thoughts after fitting the awning to the side of the van rather than onto a roof rack? Debating the two options and slightly nervous about the weight on the side panels of the van.

You have the two air suspensions connected together? Keep the two lines separated for stability.

Hi, I am planning to start a Van conversion project based on a Citroen Relay L4H3, most recent version (2024). Thank you for your very helpful videos, between you and Greg Virgo, I have no excuses to just get on with it! I am currently looking at getting a detailed floor plan with all dimensions, including wheel arch size and position, sliding door, etc .. Would you be able to provide it to me please? That will be much appreciated. Thank you for your help.

Excellent tip 👌 thanks

Can barely hear you over the music, especially so around 7:30

Hi! Loving the videos! Wondering whether I could pick your brain about my install? I trust your opinion more than anyone having watched your electrical videos.

Lovely job can you tell me what pump your using I've been looking at them wasn't sure which one I needed thanks mark

I reckon a 6x2 frame under the axle and take the wheel off and some axle stands some where that looks hard work

Couldn't you have left the bump stops on and fitted the air cylinders further along the axle

hi can i ask what fitting u used from the thetford toilet water pipe to john guest 12mm pipe please ,it had a barbed fitting as u said thanks

Awesome video, like all your videos, thank you. Did you actually post that dedicated video explaining the idea of double leaf springs you said you will? I can't find it on your channel..

Nice video mate, I agree with others about the music. Also, will you be siliconing the length of awning between the van and the awning housing? Don’t really want water sitting in there

I've just finished modifying my van seat, and I want to give a shoutout to Wiltshire Custom Camper for their helpful video. I encountered a few hiccups during the process that I'd like to share to make things clearer for others attempting the same project. Firstly, a big mistake I made was forgetting to pass the threaded bolt through both the seat base hole and the seat hole. This oversight caused confusion when the "up and down" mechanism didn't work as expected. Once I corrected this, I still faced issues with the rear "up and down" function. After some troubleshooting, I realised that the seat hole must have the ability to rotate to allow the seat to rise and fall at the back. This meant that the nuts securing the two holes together couldn't be tightened all the way. There needs to be some room for rotation. Also, as mentioned in the video, some black plastic conduit does tidy it up nicely, leaving a professional finish. I hope this tip proves helpful to someone else tackling the same task.

Tried this trick today without success... The man on the speaker was quite clear that campers are not allowed on the parking lot. So unfortunately this trick doesn't work anymore I had go reverse and find another place. Maybe it works when there's no one on the phone outside office hours....

Hi there great job I've decided to use IKEA doors do you know if they do an edging iron strip Thanks

I've watched all your channel I'm good at building things but your very good you should make campers as a job. Good work 👍

What size battons did you use for the frame

Hi Just doing my shower build on my Boxer, just wondering if you have the dimensions for the Door cut out and the toilet access cutout? Your video's are really helping my build thank you.

Hi there! Great video. I just want to let you know that I first installed the SUMMO SPRINGS, and after one year... my van get rested on them so the comfort became terrible. So now im going to install an airsuspentuon like you.

Thanks a lot for doing this. Convinced me to stick with ply for my L4H3 and keep solway as just an option for certain corners. Really hoped they’d be better than this. Didn’t occur to me that they just wouldn’t fit!

Hi buddy amazing as always 👌I don't suppose you remember where you got the straight coupler for the tap to the pipe from? Or what size each end is? Cheers 🍻

Hi, do I need to run negative cable straight from the main battery (-)or just screw into ground somewhere along? TIA

Hi Great video, just wondering how you wired the 240v inverter input from the consumer unit, did you cut off the 3 pin plug and wire directly from the consumer unit? Thanks David

I'm enjoying your series and hit sub on the second one. Tell ya what might be nice is a materials and suppliers list on a few projects though. Cheers for posting.

Hi, I need a little favour, do you have an email address?