Video

no i have not seen tom's make carbon fibre parts for the exterior of their cars

Exactly

Draggy lap

The curve on the graph so the shape doesn’t change yes it shows a different value but it’s the curve you want to study so the way the shock reacts to bound and rebound and how quick it reacts doesn’t change

So the black box is a factory crank case breather and catch can, honed developments have done a lot of testing and experiments and they found as long as it isn’t leaking there isn’t much need to do any thing with it just replace the o ring and keep it in

The port was there and on an aspirated car the vacuum of the intake actually reduces the crank case pressure by essentially sucking it out, yes the oil Vapor is bad for the valves but on a healthy motor you don’t get much of any blow by so it’s a non issue , but yes a catch can is a good idea, I didn’t have one handy so I didn’t bother with this mod

Actually all paint has the same heat rating, the ‘high temp paint’ is just a marketing scam, how do I know this?? Well the guy in the paint shop told me and I used that paint on the brake calipers and it didn’t discolour at all and the brake temps get to 400+*c so it’s safe to say that the paint shop guy was correct

We did both 100%

Also maxpeedingrods now have an even better shock design that’s about as good as bc they are the T07 spec coilovers

Heaps on market place , heaps at mxr use code tristan1 for a discount

Check out my newer b18c2 turbo build done properly the thing flies

You don’t have to

Link in description.

3071, I wish I went bigger you will need something with a 1.01 rear housing

They haven’t really changed in 100 years

Still crap

nah man they are still going strong lovng them

Yeah they are beautiful

I think i melted it shut I honestly cant remember

RIZZCAR

G'day Km we didnt do any actual testing, but from the research I have done over the last 6 months, i decided to put them in this location, so as not to be in a high pressure zone or a low pressure zone

Thanks bro

Easier to do the whole trailing arm

Disc rear has different hubs and everything

@@TURBOTRISTO yeah I figured that. I was just wondering about the trailing arms cuz I have a 95 EX coupe and I did not know if I got the rear pieces from a Integra if I could just use those same trailing arms that's on my ex or if I have to use the Integra trailing arms. And I figured since you did it you'd probably know LOL

Thank you sir

Thanks mate

Yeah my only regret is I didn’t clear coat my car

@@TURBOTRISTO if you use clear coat, do you still wet sand then buff and polish it? im not far off that shop in springy, i'll definitely pay them a visit

@@Cephyr tell them I sent you honestly my paint job looked 100% better before I cut and buffed it, cutting and buffing is a whole other skill and the paint that complete auto paints sells is soo good you don’t need to buff it if you follow the same steps as I did

@@TURBOTRISTO cheers, legend. i didnt see that you got any orange peel i was impressed

i got zero orange peel

Glad you enjoyed it

same here very keen

A stock ecu stock tune stock map sensor stock o2 sensor all make it cut at 3000rpm

@@TURBOTRISTO thanks for the quick reply! Planning to buy a del Sol. With turbo kit bolted on. Also has Hondata. Seller did say it needs a tuning. Which I will do.

my man good stuf

@@TURBOTRISTO I forgot to ask you. What will happen If I dial boost controller to lowest setting? I'm planning on o driving her back home without blowing the engine lol.

@user-gy2pk3ec7n dial your foot back and don’t rev it out, the factory map sensor won’t like any positive boost pressure, and the injectors and o2 sensor can’t read that lean, if you drive it hard it will lean out and melt the pistons and run to hot spin a bearing and shoot a rod out of the block

I wish I did have a code I should ask them actually

Use code Ttrist they just made it for you

@TURBOTRISTO thanks mate, just ordered a plate, saved me $20! Can't complain there. If anyone is wondering you get 5% off! Pretty good.

The cuts a little rough but it will look good at 150+km/hr

I wish this one was vtec

including parts and labour? just under $5k

Спасибо брат ! Надеюсь, у тебя все хорошо, я люблю матушку Россию

unsure 3 inch all the way through i believe

I’m keen let’s hook it up

Cheers 🩵

Hahaha

Thanks majdi, yes I used the stock valves

Check out my later videos on the yellow integra I did every bush in the rear end of it to give you an idea what’s involved

@@TURBOTRISTO thank u sir

Any workshop can do it if you supply every single part you pretty much need a donor car these days they are both old cars now

Why don’t you have a go yourself?

If you run less that 5 psi and crank up the fuel pressure it should be ok ish

@@TURBOTRISTO how much fuel pressure should the regulator read then

@@Christian-ml5pw I would put it at 50psi base pressure

none at all man,

thanks for watching

Yeah. You made that pretty obvious. Find a different line of work.

@thebuster1284 lol I work at a premium suspension brand in Australia good chat brother

@@TURBOTRISTO that's makes sense. Just because you're educated, doesn't mean you're smart.

The best one you can afford to suit your application

Sure

You sure are man you are one of the original gangster

Always grinding

That would be amazing I dream of a hi revving big cams k series too

12.50 injectors waaaaaht is that real?

I tested them before fitting and they all appeared good. Fitted them and the car runs like a charm. Just seemed a lot easier than cleaning the original ones. I thought it was such a good idea that I bought another set for a car with 300,000 kms on its original injectors, these were a bit more expensive at just over $15 each. These also work just fine and the car seems to have picked up a little power.

From where lol

well that's pretty awesome, well done

@@cpzmelbsfrom Epay.