Video

After it’s replaced the code needs to be cleared. Or for me at least it did. It didn’t come back after that. Hope that helps!

@@theSuburbiaDad I’m sure they tried to clear the code but they said somethings wrong with the wiring. I don’t know if that’s true true

@616mickie strange. Mine worked perfectly after I cleared it. Maybe AutoZone can clear with their scanner for you?

Great idea! It is a great overall machine. I was always a fan of the side discharging with it. Thanks for watching and commenting!

Thanks for the feedback and watching! It’s noted.

Usually 4 to 4.5. Taller grass is definitely easier to stripe. Rarely under that range until Fall. I don’t think my ground level is smooth enough for under 3. I would probably blast the high spots out the side discharge. 😂 Thanks for watching!

Blades make such a difference! I’ve never tried Gators. I’ve heard nothing but great things about them! And I agree about a jack. I’ve been using a Ballard V2, so fast and no 💩 on my leg. 😂 Thanks for watching!

You’re a unicorn! 🦄 I’ve had a TurfMaster and Commercial 30, and I still like the handle bar / controls more on the Timemaster. Cut quality seemed just as good as well. The commerical models are not the most comfortable to use on your hands! Thanks for watching!

@@theSuburbiaDad I prefere the personal pace. Being diabetic with neurapathy I can set the pace I want, basically better for me. Don't know what the unicorn stuff is about but to each their own I suppose.

@mrgreen2769 a unicorn object is something no one ever finds or is hard to find. Your stock pulleys going strong, it’s a unicorn find! Love the personal pace. I wish that was in the commerical line!!!

I see you Canada! Thanks for watching.

Nice!!! I got stickers in the truck for that reason!

It depends on how hard the soil is. You want to get 2 to 4 inch plugs. So, maybe start with no weight, then had blocks as needed. Hope that helps!

Me too. 😆 Don’t do what I do. Thanks for watching!

I think I commented on your other comment with the information. Is that was not you, let me know! Thanks for watching.

Agree 100 percent. But if you don’t have one, here is a work around. Thanks for watching!

Here is the one I got…. amzn.to/3Xvxqeu It’s no longer available. I feel like people have used this one… amzn.to/3VOwEYH It looks identical to what I have. If you try it, let me know if it fit! Hope this helps! Thanks for watching.

Garage is a mess nowadays! I don’t know if I could find any tools anymore. But thank you and thanks for watching.

Also, maybe heat shrink the wire connections...

Yeah. Probably would have been a good idea! Thanks for watching!

Agreed. That would be ideal. Thanks for watching!

😂 💪

What was your solution? Impact drill? I hope you got it!!!

Lost me on this one. 😂

I’ve thought about it! I know some companies make a deck spray. I’ve never used one though… yet. Thanks for watching and commenting!

PPE is always recommended! Thanks for commenting.

😆

It makes quick work of lots of blades fast!

Nice!!! Thanks for watching.

It sound like, maybe, the reel is too close to the bed knife. Adjust the screws on either side until it spins freely with as little gap as possible between the knife and reel. That’s my best guess. When I’ve had clunk sounds that was why. Hope this helps!

I’ve never had an issue with mine. Still on since the day I did it.

I forget off the top of my head. I think it was like outside wheel to outside wheel. There website and recommendations on it. Hope this helps!

I suppose it would depend on the engine you have. It should be in the manual for the Kohler and Kawasaki. Hope that helps! I’m sure by now you found it. Thanks for watching!

😲 That’s why I changed it out right away. I bet it sounded horrible!

There are a million ways do to anything and get the same result. So, if it works, perfect! Love the collection you’re building. Keep it up! Thanks for watching!

If you have the space to store a ride on, I would ride. 😆 Are you talking about the Edge? Timemasters are nice. I swapped my pulleys out right away for the Exmark ones. It’s a common fail point. The cut is sweet though. I always side discharged. I think it cut better shooting the clipping out the side. But, if you can ride, I’d ride. You might consider a small stand on? I have a 36 stand on and it’s sweet.

It’s a great mower! Cut is clean and it’s a nice ride. Thanks for watching!

I don’t know what that means. Clarify for me.

@@theSuburbiaDad professional reel mowers has goven cuts per meter or foot/inch. That means how many times reel knifes will meet bed knife during 1 meter ride. The higher the less ribbon effect you will see on the lawn when cut low. I will be gratefull if you could measure wheel diameter or circumference and how many times reel will cut during one full wheel rotation.

It’s a nice relaxing ride! 😎 Thanks for watching!

It’s nice to be able to make one less trip! If I used the bracket, it would stick out further than I wanted. So, I modified the install slightly. 😆 I was thinking particularly on my 36. It needs to stay that to get in and out of gates. Anyways, thanks for watching as always!

It’s makes quick work of it for sure! I feel like the sharpening disk has lasted a long time. I did flip the disk over already, but it goes and goes. Hope your doing well! Enjoying the videos you’re getting out there.

@@theSuburbiaDad Yeps I'm still using Flap disk like that setup you got there✔️💯

@@bigsonslawncare flap disking is great too! I was a ninja with those things. 🥷

@@theSuburbiaDad 🤭🤣

I’m blessed. Thank you.

You don’t even know you need it until you see it! Thanks for watching and commenting.

Hi! Here is the kit I used… amzn.to/3PASkDX As for time, basically until it sounds like it is spinning smooth. You can hear it the difference. Hope this helps!

On the XD it is controlled by the key position. So, you could have them on or off. The kit I used does provide a switch you could install if you didn’t have a pre wired key scenario. Thanks for asking and watching!

Nope! I bought it. Here is the link to what I got off Amazon… amzn.to/4cv0d7E Hope this helps! Thanks for watching.

Yep! It shouldn’t be an issue. Just reference your manual first. It will tell you what it allowed. Usually synthetic options are acceptable. You just want to make sure you have the correct weight. Thanks for watching!

You knew manual book recommendation kawasaki oil.10w-40 at my area.Just a little concern,thanks for you response.

@tritang9650 always do what you feel comfortable with. Brands will always recommend their brand of product first. Mine said… “Alternative engine oils and oil filters may be used with KOHLER engines but require 100-Hour oil and oil filter change intervals for proper maintenance. Oil must be API (American Petroleum Institute) service class SJ or higher. Select viscosity based on air temperature at time of operation as shown below.” Have a great rest of your day!|

Ah! That is my Big League Lawns stripe kit. It lays the blades of grass down to get those bold stripes! Here is a video of it in action…. czcams.com/video/4TPQhpvcUbw/video.htmlsi=6Qfx4s6a6ysDosfl Thanks for clarifying!

I don’t have the XD anymore, but I’ve not heard of it having an issue. I do feel mowing batteries only last a few years regardless. Definitely a part designed to fail eventually. You might be able to get longer out it if your trickle charging it when not using it for long periods of time. Thanks for watching and commenting!

Sold it! I wanted something commercial. I really do wish the Turfmaster had Personal Pace like the Timemaster. I find the handle bar situation to be a bit awkward on the Turfmaster. It took me a while to get use to it. Side note, I saw Toro in Lowes recently. The Timemasters were hidden in top stock of the paint department. Next time you go into one, scope out where they are hiding. Thank you for your continued support and being an OG of the channel.

@@theSuburbiaDad Yes sir I'm always lurking around your garage! Thinking about adding a used Timemaster this season👍🏾

@bigsonslawncare I saw you have a channel and I’m not on that sticker board! Email me your address… dadsuburbia@gmail.com

@@theSuburbiaDad You're on my Board at my shop the very first one I started with💯👍🏾All my OG memberS stickers are on that board

@bigsonslawncare well, I was prepared to sent it tomorrow AM! ✈️ 💨

I did get sell the Ariens. I started a business and needed commercial equipment. The Ariens is awesome and would recommend to anyone! I miss using Mr. 52. Such a good mower. This video had an audio issue when I released it originally. I finally fixed it! Thanks for watching and commenting!

Do you have visitation with Mr 52? Maybe every other weekend? I'm sure it is still killing it out in the turf. You had pimped it out really nice!

@@Uncle_Fester24 😆 I wonder how he’s doing time to time. He was in prime condition. Absolutely mint! I’m sure he’s out there just striping away.