![Nupid](/img/default-banner.jpg)
- 50
- 44 801
Nupid
Germany
Registrace 13. 04. 2009
Hi.
Chill Vibes and FPV (Oh Wonder - Technicolor Beat)
Last Weekend I just went somewhere I've never been before with no plan, just walking around with my Camera and flying a few packs chilling, enjoying the good weather and trying to capture some of the beauty I've come along.
0:00 - 1:23 Chill Vibes
1:24 - 2:57 FPV
Camera: Sony A7S3 (Tamron 28-75 f2.8 + Sony 70-200 f4.0)
FPV Footage: OG Air Unit (Goggle DVR)
Haven't been uploading in ages because I never know what to do with myself. I used to compress almost every day I went out to fly into a Video but I haven't really been flying at all this year. Been too busy with stuff and mostly myself.
Maybe I'll start to post more again, maybe something with a purpose and not just random clips that kinda look good to the first best music I listen to while scrubbing trough it, haha ^^
0:00 - 1:23 Chill Vibes
1:24 - 2:57 FPV
Camera: Sony A7S3 (Tamron 28-75 f2.8 + Sony 70-200 f4.0)
FPV Footage: OG Air Unit (Goggle DVR)
Haven't been uploading in ages because I never know what to do with myself. I used to compress almost every day I went out to fly into a Video but I haven't really been flying at all this year. Been too busy with stuff and mostly myself.
Maybe I'll start to post more again, maybe something with a purpose and not just random clips that kinda look good to the first best music I listen to while scrubbing trough it, haha ^^
zhlédnutí: 45
Video
Building a Cinewhoop with Parts from my broken Baby Ape - GEPRC Cinelog25 Frame
zhlédnutí 205Před 8 měsíci
Base was Baby Ape Pro v2 ELRS from DarwinFPV a long time ago but now even the frame has gotten replaced. May the broken Pieces Rest in Piece. GEPRC Cinelog 25 Frame Kit T-Motor 1404 4600kV JHEMCU GHF411 35A AiO SpeedyBee TX800 VTX v2 Lolipop Antenna BETAFPV ExpressLRS Lite Receiver v1.1 (flat ceramic Antenna) Hawkeye Firefly Thumb 4K 2-in-1 Camera (AV out 4K Recording) @SorgFPV@SorgFPV (Day1)
Hawkeye Firefly 4K Thumb - Recording and Flying with the same Camera! - First Full Flight - FPV :)
zhlédnutí 2,7KPřed 10 měsíci
Testing out the Firefly Thumb on my Bastard Baby Ape. There was nothing wrong with the existing cam but why not? It works and I like it for what it is. Check out Oscar Liang's Full Review if you wanna know more and where to get it: oscarliang.com/hawkeye-thumb-4k-camera/ music: Kid Francescoli - "Moon" czcams.com/video/fdixQDPA2h0/video.htmlfeature=shared My Stuff: (analog) Skyzone Sky03O OLED ...
My First (casual) FPV Racing Experience (Mobula 8 DVR + Baby Ape v2 w/ Runcam 4K )
zhlédnutí 222Před 11 měsíci
Met with 2 friends from our local FPV Group to rip some packs on an empty sports field and one of them even brought some gates and a flag! Didn't even break sh*t! ^^ Haven't been flying a lot lately and haven't touched a sim in a long time. I was most comfortable on my Mob8 flying 2S Packs while the dude with experience whipped out his 6S Builds and blasted away.. Goals :D Get yourself a TinyWh...
Tight Turns & Trashing Tinywhoops (Analog DVR Mobula 8 on 1S) | FPV Freestyle
zhlédnutí 322Před 11 měsíci
Friend hosted a small get together to race some Whoops though his flat. Sooo much fun! Didn't need much of a Track since we are all kinda 'Shit Pilots' ™ but it didn't matter..we flew, we crashed, we laughed, we flew again and laughed some more Sick Edit he did last time: pCusOTAdIT6p/ music: 0:00 Skrillex, Noisia, josh pan & Dylan Brady - Supersonic (My Existence) czcams.com/vid...
Full Field Flow Flight (featuring Fails & Flips for Fun + Friend) | FPV Freestyle
zhlédnutí 85Před 11 měsíci
alliteration (: fuck flinging my GoPro around a bit Been busy, so much going on at the same time right now I can't keep up but I am doing what I love and I love doing it. Things don't happen over night, you'll have to work through it 'till the sun rises again ;) music: Hippie Sabotage - WRONG TIME czcams.com/video/F_sEb0NrwXo/video.html My Stuff: (analog) Skyzone Sky03O OLED Goggles RadioMaster...
Troubleshooting & Shooting Troublemakers | FPV Freestyle | Short Clip + Full Flights w/ DVR
zhlédnutí 151Před rokem
Troubleshooting & Shooting Troublemakers | FPV Freestyle | Short Clip Full Flights w/ DVR
Spain from Above - Cinematic FPV ( 4K | GoPro 11 ) @JonFPV_
zhlédnutí 107Před rokem
Spain from Above - Cinematic FPV ( 4K | GoPro 11 ) @JonFPV_
My "Baby Ape" lives again | 3" FPV | JHEMCU GHF411AiO 40A
zhlédnutí 623Před rokem
My "Baby Ape" lives again | 3" FPV | JHEMCU GHF411AiO 40A
My Favorite Shots with the Runcam Thumb Pro v2 (4K - 21:9)
zhlédnutí 313Před rokem
My Favorite Shots with the Runcam Thumb Pro v2 (4K - 21:9)
ESC bursts into FLAMES 🔥 🪦 RIP DarwinFPV Baby Ape Pro v2 🪦
zhlédnutí 20KPřed rokem
ESC bursts into FLAMES 🔥 🪦 RIP DarwinFPV Baby Ape Pro v2 🪦
3 Spots - 2 Quads - 1 Video | GoPro Hero 10 vs. Runcam Thumb v2 | FPV Freestyle & Cinematic
zhlédnutí 859Před rokem
3 Spots - 2 Quads - 1 Video | GoPro Hero 10 vs. Runcam Thumb v2 | FPV Freestyle & Cinematic
Practicing Dives and Lost Video | Sub250g FPV Edit + Full Flight incl. DVR | Runcam Thumb 4K
zhlédnutí 214Před rokem
Practicing Dives and Lost Video | Sub250g FPV Edit Full Flight incl. DVR | Runcam Thumb 4K
Broken Lens Banged up Quad Bad Tune But Still Flying | FPV Freestyle / Cinematic | Runcam Thumb 4K
zhlédnutí 197Před rokem
Broken Lens Banged up Quad Bad Tune But Still Flying | FPV Freestyle / Cinematic | Runcam Thumb 4K
Sunday Solo Session @ School | 2.5" + 3" Sub-250g FPV Freestyle | Runcam Thumb Pro v2 4K
zhlédnutí 206Před rokem
Sunday Solo Session @ School | 2.5" 3" Sub-250g FPV Freestyle | Runcam Thumb Pro v2 4K
This Camera Looks Stunnig! (RunCam Thumb Pro v2 4K | BabyApe v2) FPV Freestyle
zhlédnutí 5KPřed rokem
This Camera Looks Stunnig! (RunCam Thumb Pro v2 4K | BabyApe v2) FPV Freestyle
FPV Full Flight -- Chill Cinematic Cruise (RunCam Thumb Pro v2 4K | BabyApe v2)
zhlédnutí 935Před rokem
FPV Full Flight Chill Cinematic Cruise (RunCam Thumb Pro v2 4K | BabyApe v2)
My 2.5" TinyHawk 2 Freestyle Rebuild (Microheli Frame) | FPV
zhlédnutí 664Před rokem
My 2.5" TinyHawk 2 Freestyle Rebuild (Microheli Frame) | FPV
Digital Diary | FPV Freestyle | RunCam Thumb Pro v2 4K | BabyApe v2
zhlédnutí 163Před rokem
Digital Diary | FPV Freestyle | RunCam Thumb Pro v2 4K | BabyApe v2
Fire in your Eyes | FPV Freestyle | RunCam Thumb Pro v2 4K | BabyApe v2
zhlédnutí 591Před rokem
Fire in your Eyes | FPV Freestyle | RunCam Thumb Pro v2 4K | BabyApe v2
I broke an arm :| FPV Freestyle + Repairs (3" Baby Ape v2 + Runcam Thumb Pro 4K)
zhlédnutí 170Před rokem
I broke an arm :| FPV Freestyle Repairs (3" Baby Ape v2 Runcam Thumb Pro 4K)
3" is big enough ;) | FPV Freestyle + Crashes (3" Baby Ape v2 + Runcam Thumb Pro 4K)
zhlédnutí 495Před rokem
3" is big enough ;) | FPV Freestyle Crashes (3" Baby Ape v2 Runcam Thumb Pro 4K)
ND16 at Night (oops) | FPV Short (3" Baby Ape Pro v2)
zhlédnutí 75Před rokem
ND16 at Night (oops) | FPV Short (3" Baby Ape Pro v2)
Drowning World | FPV Short (3" Baby Ape Pro v2 + Runcam Thumb Pro v2)
zhlédnutí 5KPřed rokem
Drowning World | FPV Short (3" Baby Ape Pro v2 Runcam Thumb Pro v2)
Runcam Thumb vs. Thumb Pro v2 | FPV 3" Baby Ape Pro v2 + 2.5" TinyHawk 2 Freestyle
zhlédnutí 1,1KPřed rokem
Runcam Thumb vs. Thumb Pro v2 | FPV 3" Baby Ape Pro v2 2.5" TinyHawk 2 Freestyle
Timeless Fun | 2.5" FPV TinyHawk 2 Freestyle
zhlédnutí 122Před rokem
Timeless Fun | 2.5" FPV TinyHawk 2 Freestyle
It's not so bad, it burned down in my apartment during the first arming
Stellar edit. Loved it
Beautiful ❤
Nice artsy vibes! 10/10 on the chill factor.
thanks 😇
0:19 is the depth of field real? if yes... wow just wow!
Yes, that was shot like this in-camera with the Sony A7S3 Camera and a Tamron 28mm-75mm f2.8 Lens. Only did Color in Post, no artificial mask or blur added. Wide open it has a very narrow focus plane which was just perfect for this shot of the ants crawling in a line from side to side ^^ Some Ants that were a just a tiny bit further back (like on the top left) were out of focus already which is insane ^^
To which ports did u wire the camera?
i wanted to get that one, but at the last moment i switched to the crux35 because i heard darwinfpv is cheaping out on quality to get the price low
Have you experienced issues with that one esc? Like the motor don’t start or something?
How is the image quality in the goggle? I'm planning to just buy 1 hawkeye 4K, then just hotswap and install onto the one that I going to fly.
Honestly, I don't even use the Hawkeye Thumb at all anymore. You can see the picture quality on the bottom right in the Video, recorded with the Goggles DVR. BUT I had experienced the camera FREEZING while flying causing me to crash. It just stopped mid air. I CAN NOT and WILL NOT trust this camera ever again. Also, depending on the FoV you want to film at, you will have the same FoV while flying. With the wiedest setting it feels almost impossible to fly since it is such a wide angle. Oh, also the recorded Videos quality.. Well.. The more I used it, the less I used it, lets leave it at that.
@@Nupid_Stoob i think the deal breaker is when the camera freezes during flight. So what camera are you using now to record flight?
High kv 1404's use a lot of juice, even the lower kv versions use a lot of juice. If you are looking for motor upgrades for a Baby Ape, HM 1204 6500kv would be a better choice. 8A per motor @ 100% on GF 3025 and a max of 800g of thrust on 3S.
rip
Фаершоу
How do I get that image quality with my Runcam Pro? I put an ND32 filter on it, I set the camera to 4k 30fps - 1/60 - ISO 200, and I still can't get it to look this blurry when I fly close to the ground What do you recommend me???😭😭😭 And I would also like to know what Rates you are using for that smooth movement
What PID settings do you use on the Baby Ape?
Before the winter break I was learning how to tune drones myself with blackbox logs. But if you don't wanna get into it yourself I can recommend the "Supafly" Presets in Betaflight. The preset itself will do wonders but if you want to get in a bit more dialed in check out his website and the guide on how and what to do :) supaflyfpv.com/betaflight-setup/
Do u use any ND filter?
Depends on the situation. If it is still too bright on the lowest ISO and I want to keep shutter at double the frame rate, then yes, I'd use an ND Filter. Keep in mind, ND Filters are basically sunglasses for cameras (same principle/effect)
Quite a lot of time has already passed. Where are the results of the new build? =)
I'm ashamed to say that I didn't even fly it once since I built it (except for a test hover inside lol) also got a BRAND NEW prebuilt CineLog30 laying around gathering dust instead of creating some :D I haven't really been flying at all for like 1/2 year now. Winter weather and winter depression, also work and generally just life happening. Imma go out more often soon again. Weather is getting better and so is everything else in life again. :) Maybe I'll do a short Video out of it haha "Can I still fly FPV after half a year or will I crash miserably?" :p
For analog flyer like me, this is a great footage especially the pilot view footage....do we just connect the last 3 wires on right to get the view?
Mine didn’t even get to take off before it burned up
Rip 😥
What setting do you use i also have this cam and the settings are not asa easy as they look. Nd filter? What setting on cloudy days and what setting on sunny days? Sorry for the long question. But I tried a lot of setting but there never were right.
I always used the 4K ultrawide-FOV setting on it (important to apply the correct lens profile in Gyroflow to "desqueze" the image!) with the flat color profile (color grading in post) I set shutter Speed to 1/60th with ISO to Auto (ideally set to constant value, but not easy to get right) I didn't really use ND Filters since I broke or lost them pretty quickly lol but ideally the brighter it is, the stronger ND you want to use. Think of them simply as sunglasses (bc thats what they are anyway) and try to get a feel for brightness and when to use them
Thank you very much , but one more question. What metering do you use?
Mine stops recording then records again Causing my osd to freeze up
I had that problem as well while flying lol and then complete blackout of the video feed. Don't know what exactly caused the freezing but I was playing around with settings at that time. Firmware Factory Reset fixxed the issues.. Haven't really been using it since though anyway..
Regarding FOV, are you shooting in 16:9 or 4:3? I also noticed you were shooting in 4K. I thought it couldn't stabilize in Gyro when shooting in 4K and had to shoot in 2.7K. Anyway, good luck with your vision. I'm waiting on mine to arrive so I can fly my Nanohawk X with the "Poor Man's O3."
It does record gyro data at 4K30fps but not at 4K50fps I shot in 16:9 The RAW Footage will look distorted anyway, it is important to correct it with a fitting lens profile in Gyroflow. Makes it look so much better. Have fun!
What's great is this happens all the time and we keep blaming ourselves and not the cheap stuff being made in china that is never built to last. it's not your fault but T-motor or esc's fault for not being designed to hold up to NORMAL FPV stuff. Thank people like JB for pushing cheap stuff that should have never been made for FPV...as they don't last long at all and we have to go back buying new stuff all the time to fix things that broke because they were made cheap for people like us. FPV is such a ripoff these days. Everything gets more expensive but we are still left with products that break, catch fire or loose everything just because they can't make quality stuff! So yeah sorry for your loss, but this is FPV and FPV has screwed us over and people leave for that very reason alone! thanks for the post...now I know never to trust Tmotor and buy from them :) oh and speedybee is trash...if you want to quit the hobby and spend money on junk that is either DOA or stops working half way through a nice flight...well speedybee is your one stop shop for all your FPV horror stories :) lol just had to get that in here....happy flying! or at least that's what I was told we should think
Fuuu... R.I.P. little Ape...
Hello my friend! Nice video!! How do you do to not have a "shake" video? Mine shakes, like bobble, when accelerates. At low velocity, like your video, it is almost fine, but when I try some hard freestyle with big accelerations, it is very bad... Thanks in advance!
Sounds like your quad itself isn't very well tuned and vibrates a lot. But thats kinda expected if you freestyle alot lol Search for Gyroflow Guides and how to use it to get some stabilisation though!
Damn fail safe 😂
Seems like it flys good on 1s!
Perfect for Indoors on 1S. On 2S it packs a punch dude You can even take it outside to race with it czcams.com/video/kAh9oZW7BRs/video.htmlsi=ccbSmHyFg9-ZcvzQ&t=44 I felt most comfortable flying that small 2S Whoop that day. 3S 3" and 4S 5" were to fast for me on my first "real" race experience outside the Sim with small gates. You can push it so hard and it takes crashes like its nothing!
@@Nupid_Stoob yeah, I have a couple videos of it on my channel! Rips on 2s!
@@Nupid_Stoob but I have a 4s 5” awesome quad, love your videos. New subscriber!
Love this footage! I just got this camera. Price can't be beat, looks good, and I can FPV it until I can upgrade to Walksnail or HD Zero.
How is the image quality in the DVR?
Are you using gyro flow to stabilize the footage?
Did you notice any delay?
trippy teknos blur settings! want mine??
soo good bro
'Promo sm' 🙌
❤❤That looks like the best thing money can buy! Well worth it! Does it feel disconected or locked in! with the delay?
When I first got it and was using it with basically the stock settings everything was pretty okay in terms of delay. You could definitely notice it, nothing to really freestyle or race with but good enough to cruise for sure! Only thing to really bother me was the super wide FOV while flying. Once I tried to play around with the picture settings I only had problems with the Video lagging and COMPLETLY freezing after some time. Don't know which setting caused it but doing a reset fixed it. Haven't had much flight time with it tho and quad grounded rn. Arm broke (again) and I got no replacements anymore.. To be honest I don't trust it anymore to solely rely on as the flight cam but I"ll be running it just as a recording cam for fun, but nothing "commercial grade" or instagram worthy.
awsome im thinking about getting this camera for £60 with nd filters and the baby ape v2 pro for £60 also and have an awsome little freestyle drone
ay brother how much flight time with the camera on?
I don't teally time it but I'll get like 4-5min easily with a 550mah 3S LiPo. Maybe you could get a bit more flight time like a Minute by going with 650ish mAh batteries, dunno. Also depending on props and PID Tune a bit but 5min is easil achievable
Could you share your settings for the camera? And the gyroflow settings?
Sorry can't remember the exact settings. But can't go wrong with locking the ISO at 100 and either fixxed shutter at 1/60 if you know what you are doing with the ND Filters or just leave it on Auto otherwise. I shoot with Flat Color and with Contrast, Saturation and Sharpness set to "Low" and getting the color back later when editing. For GyroFlow here is a basic preset on pastebin (You might want to look into how to use presets for GyroFlow): pastebin.com/ZYiBFBtH I have been planning a complete GyroFlow Guide as I understand it and use it but I just haven't come around to actually doing that. Stay tuned, maybe some day :D Otherwise I am sure there are plenty of resources anyway to help you out a bit more! Have Fun!
@Nupid_Stoob awesome man thank you for the tips! I'm new to gyroflow, mainly because I never actually post anything to youtube...or anywhere for that matter. 😅 but I have a few full sd cards, from my hero8, naked hero7, and thumb pro-w v2. I've got some really good DVR from my 04X, from some whoops that I finally started to put up a few months ago. I just want to do a huge video DUMP and try to break 10 subscribers haha. I didn't know there was pre-sets for gyroflow, I'm going to look into it. I'm definitely subscribed as of now, love the toothpick and thumb videos.
Nice what's the drone it was one?
That was on my 3" "Bastard Baby Ape". Basically the Baby Ape pro v2 from DarwinFPV rebuild with better Parts haha. Scroll way down in the description, I got the parts listed there
Great footage! I'm planing on getting this camera and a BabyApe II freestyle in a few weeks so nice to see other people with similar setups.
Nice, which VTX do you used
SpeedyBee TX800 VTX + v2 Lolipop Antenna
never ever ever thought i would see a drone edit with a song from ren
True, but + points for the dog
楽しそうで。さいこー
so stoked to see you running this on a 2.5". My parts started arriving for my 2.5".. I really want to pull the trigger on the runcam for it. Are you running 2 or 3s?
The BabyApe is a 3" but it would be no problem to go for 2.5" since it weighs only 16g I fly both 2S and 3S with it ^^
haha bastard baby ape, I guess its better than it's half sibling, wickedly awesome mate, this helps me to decide. BTW that hawkeye is one of the best for night, action cam wise, for night fpv it wont beat ratel/phoenix 👍🙏
Thanks for the comment! I'll have to check it out at night sometime 👍
very nice..
So nice
That’s GoPro quality, really cool👍👍
It really is! Thanks!
I dont normaly watch videoes twice but ive watched this 3 times!😮😮 exellent!
🙏 Thanks!
My tmotor 1404 3800 kv can pull 45amps on a punch out, im running a mamba 128k 40 amp esc, i think even a 20 amp will fry, always go above the stall torque dude, you probably know but in your osd end statistics put amps drawn, so you can check how much your motor pulls sorry for your loss, its great that you caught the moment on csmera (dvr) Thanks #RC_ADDICT #rcaddict
The TMotor 1404 4600 kv pulls around 20A on 4S under load. Thought I'd be in the clear with 2S - 3S. And everything worked fine untill the crash haha Well you live, you crash, you solder, you learn haha Got a 35A JHEMCU AiO now in it and it flies again. But you can feel how beat up that baby is now.. ^^
That freestyle was fire for real