Fire in your Eyes | FPV Freestyle | RunCam Thumb Pro v2 4K | BabyApe v2
Vložit
- čas přidán 22. 03. 2023
- Rare oppurtunity to fly in some sunshine. Just an open field and I don't fly far or very skilled, but doesn't matter, had fun :D
music:
• LissA & Lane Boy - Fir...
My Setup:
(analog) Skyzone Sky03O OLED Goggles
RadioMaster TX12 Mk1 + BetaFPV ELRS 2.4G
2.5" Setup:
Base was a TinyHawk 2 Freestyle. Basically just the TH1103 left in the build.
+Microheli Tinhyhawk 2 Freestyle conversion frame
+DarwinFPV 15A AiO
+TBS Unify Pro 5G8 HV - Race 2 800mW VTX + Pigtail Antenna for now
+BETAFPV ExpressLRS Lite Receiver
3" Setup:
Baby Ape Pro v2 ELRS from DarwinFPV
stock (so far) just replaced broken arms and motos
+Runcam Thumb Pro v2 4K
5" Setup:
Base was a HGLRC Rekon 5 V3
+TBS Unify Pro 5G8 HV - Race 2 (w/ TBS Triump Omni)
+Beta FPV Nano 2.4G
+Mamba Mk4 F722 FC
Awesome content, as always! 😁 Keep it up!
What setting do you use i also have this cam and the settings are not asa easy as they look. Nd filter? What setting on cloudy days and what setting on sunny days? Sorry for the long question. But I tried a lot of setting but there never were right.
I always used the 4K ultrawide-FOV setting on it (important to apply the correct lens profile in Gyroflow to "desqueze" the image!) with the flat color profile (color grading in post)
I set shutter Speed to 1/60th with ISO to Auto (ideally set to constant value, but not easy to get right)
I didn't really use ND Filters since I broke or lost them pretty quickly lol but ideally the brighter it is, the stronger ND you want to use. Think of them simply as sunglasses (bc thats what they are anyway) and try to get a feel for brightness and when to use them
Thank you very much , but one more question. What metering do you use?
Hi, how did you power the Runcam?
By soldering the 5V and Ground Wires (from the Plug that came with the Runcam) to open/unused pads on my flight controller. I removed the 2 other wires (TX and RX which could be used to switch recording on/off over Betaflight)
What’s the dark spot in the middle of the frame caused from? I’m looking at getting a Runcam Thumb Pro V2.
Comes from a bad crash I had where even the lens cover came off. There is a small chip missing from the actual lens. But it was definately my fault and is not some artefact from camera itself or bad firmware or something.
Flying responsibly out away from people, houses and animals. You set a great example for the FPV community!
😂 What. Get out of here you self hating fpv pilots.
Send it where ever when ever. Don't be this guy ^