How To Fit Blum Clip-On Cabinet Hinges 95° on 27mm Thick Door with Integrated Softclose Inset
Vložit
- čas přidán 17. 05. 2017
- Fitted cabinet hinges on thick doors
I don't make these videos to make money or out of vanity, I make them to share the tips I've learnt over 37yrs as a joiner, but filming, editing, exporting, reviewing & uploading does take a lot of time, so if you have gained/learnt anything from any of my videos & would like to thank me or help me out, you can show your appreciation by clicking the PayPal link below & donating enough for a drink, it has a card details option if you don't have a PayPal account, every little helps & will be very much appreciated. Thankyou.
Donate To My Cannel
www.paypal.com/cgi-bin/webscr...
Hinges from IronmongeryDirect
www.ironmongerydirect.co.uk/p...
Homemade Adjustable Sliding Table Saw Fence overview
• Homemade Sliding Table...
Adjustable shelving rack for paint spraying or storage
• Shelving Rack For Pain...
Dewalt DWS773 miter saw 45º-48º adjustment & dust collection
• Dewalt DWS773 miter sa...
Bahco nail puller, handy little tool for removing nails
• Bahco nail puller, han...
Getting good cuts from a Festool Kapex KS120 mitre saw
• Festool Kapex KS120 mi...
Making drawers with a lock corner router cutter
• Making drawers with a ...
Planing wood with Dewalt DW733 next to no snipe
• Dewalt DW733 Planing w...
Making doors with a Festool Domino DF700
• Making Shaker Style Ca...
Spraying the table legs & cross rail with the first coat of PU primer
• Spraying PU primer on ...
Mixing & spraying the table top underside with a 2 part PU primer
• Mixing 2 part PU prime...
Staining weathering ageing homemade pine crates with Tea, white vinegar & steel wool solution
• Staining weathering ag...
Spraying the blue kitchen island with a gravity feed High volume low pressure paint spray gun
• Spraying the blue kitc...
Squaring a timber frame with a pointy stick or a nail in a stick.
• Squaring a wood frame ...
Skimming a small wall with Thistle Multi Finish plaster
• Skimming a small wall ...
Air Locker nail kicker removing 90mm stick nails & 16 gauge brads.
• Air Locker nail kicker...
Cyclone dust shavings collector quick & simple, without Thien baffle
• Cyclone dust shavings ...
Glueing boards together with biscuits & then planing smooth with Dewalt DW733 Planer Thicknesser
• Gluing boards together... - Jak na to + styl
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](http://i.ytimg.com/vi/-Y6MEQlFEhQ/mqdefault.jpg)
![How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]](/img/tr.png)
Hi I need to fit these for a job tonight what distance is your bore hole for the hinge from the edge of the door ? Thanks
Hi hello, thank you for this video - just one question what the distance from 35mm hoke centre to the edge of the door please?
Hi, how far should be the cup of the hinge from edge of the door & how far the mounting plate from the edge of the cabinet wall? Please reply. Thanks
Wow, great job. Love the vid. Of the many I have sorted through, you are the only one I have seen that shows the actual mounting plate fastened to the inside of the cabinet. Was there a template that gave you the exact placement of everything? Impressive clearance on the doors, awesome.
Hi, Yep a lot of the videos online skip through some of the detail, I try to show as much as poss but trying to keep the video at an acceptable length at the same time,
no there is no template, There might be one available but they are really simple, I'll put a short video up later with a bit more detail. Thankyou
Neat Man 👌
Thanks Bobby 👍
Fantastic Tip bro
👍 Thanks
nice!
Thanks
what is the parts number for this hinge please?
Hi
The Hinge plate is H=0 or is H=3?
thanks
Gerardo
Helpful vid! Are you using a normal blum hinge on a thick door or those special blum hinges made for thicker doors?
Thanks 👍 I put a link for the hinges in the description of this vid but it doesn't work any more, the site must have changed it, I've changed the link to the one i have bookmarked on my PC, cabinet hinges for doors 16-32mm thick www.ironmongerydirect.co.uk/product/blum-clip-top-thick-door-soft-close-cabinet-hinge-95-inset-pair-784701
while i have now followed your instructions i now have about a 1/4 gap on the non hinge side. I cant adjust to hide the gap either. Is there a hidden requirement of door width i did not know about because these doors fit fine with the hinges that mount on the outside. thoughts?
Hi, the adjustment on these hinges is not much, 5mm-ish, is the adjustment screw on your hinge at it's max?
A standard kitchen unit has a door that is approx 5mm smaller than the outside size of the cabinet, so a 600mm cabinet will have a door 595mm, that's fitting with overlay hinges,
Gid joiner adjusted to the max..
What is the opening of your cupboard, the width of the door, how far in is the hole for the hinge, & are you using 35mm inset or overlay hinges,?
The door is 19 1/2" while the opening is 17 3/4". I cannot understand HOW I have a gap?
nice
Thanks
Hi , can you use these thick door cabinet hinges on 22mm doors with 18mm carcasses . Doors will be several side by side in a overlay . ?
Thanks
Hi, 6yrs since i used these, the 35mm hole is the same as other concealed cabinet doors so I don't see why not, The doors I normally make are 20-22mm with reg concealed hinges, 22mm is pushing it a little with reg hinges tho, The bookmark link has changed but these are from Ironmongery where i got the ones in the vid, 16-32mm it says www.ironmongerydirect.co.uk/search?query=cabinet%20door%20hinges , don't forget to buy the mounting plates.😉👍
Rất hay
Cảm ơn bạn 👍
What’s the name of the 35mm router bit you’re using ?
The router bit i have is T1835A www.wealdentool.com/cgi-bin/sh000001.pl?WD=boring%20hinge&PN=Online_Catalogue_Hinge_Boring_26%2ehtml#aT1850
Nice margins. If you were doing a face frame kitchen would you use this method as well as opposed to butt hinges? I'm going to make mine but I'm not sure on that detail as yet. I thought about doing what you are doing here or having the face frame overhang the carcass on the inside and use butt hinges... thanks for the videos.
I give the option to my customers,
These concealed hinges have soft close or push to open, they don't need a catch to hold them shut & have lots of adjustment to get the door straight in the frame, They can sag a little over time tho & need about 65mm to mount the plate on the inside,
I use butt hinges on a job like you mentioned where there is a frame overhanging, i just built a kitchen like that, -
facebook.com/gid.joiner/media_set?set=a.1652275884858771.1073741999.100002291265531&type=3
I buy catches like these from my local hardware store to go with the butt hinge option, very strong, small & neat,
www.amazon.co.uk/Nickel-Plated-Magnetic-Rating-Screws/dp/B00I6JN2VQ/ref=sr_1_7?ie=UTF8&qid=1524576675&sr=8-7&keywords=Magnetic+catches
I've got about 170 albums, all 'Public' on my Facebook page, many showing the process of construction,
facebook.com/gid.joiner/photos_albums
Thanks for the reply. I'm not on Facebook so couldn't look, maybe there's a way. The sagging issue is something to think about it.
No problem, I think the sagging is more with cheap hinges & maybe the old quality type, these are quite good & if they do sag in a few yrs they're cheap enough to change but yeah i like & tell my customers that the butt hinges will last a lifetime, 😉
Facebook is easy to join, you only need an email address, the rest you can make up, My real name isn't Gid & my mate is on as an 80yr old woman 😃 , your choice tho of course,
I thought it was Gid as in Good. We have a guy up here called Gid wi' Wid (Good with wood).Ha ha!! Thanks again Gid.
😁 I like it when i get a txt that predictive text has corrected to God 😁
What is the size of hinges?
Hi, they are 35mm concealed cabinet hinges for thick doors, the holes are 35mm, they open 95° to the cabinet.
I'm sat in my van at work but they are these -
www.ironmongerydirect.co.uk/product/blum-clip-top-thick-door-soft-close-cabinet-hinge-95-inset-784701
25 एमएम प्लाई में ऑटो कब्जा कैसे फिटिंग किया जाता है प्लीज इस को ध्यान पूर्वक बताइए आपसे रिक्वेस्ट है धन्यवाद
WTF
now thats neat,, looks great till the painter gets at them lol
Thanks, 👍
Yeah that's why i offer to spray them, got sick of 'decorators' blathering em 😒
Is this hinge suitable for 50 mm door?
The door thickness is for a 16-32mm door, the link is in the description but this will take you to all their thick door cabinet hinges www.ironmongerydirect.co.uk/search?query=Cabinet%20Hinges%20thick%20door
@@Gidjoiner Thank you, but unfortunately I am in Turkey. I can't buy it from that store.
What's the name of the bit you have in the green drill
boots Mclaughlin, it's a self centering bit,
I'm not recommending these particular ones, just copied the link to show you
www.amazon.co.uk/gp/aw/d/B01DIWXDNM/ref=mp_s_a_1_10?ie=UTF8&qid=1513524850&sr=8-10&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hinge+drill+bit+set&dpPl=1&dpID=419ToM3hi1L&ref=plSrch
Gid joiner are they not great one to have and your not happy with them... thanks bud
boots Mclaughlin sorry not sure I understand that sentence, that link isn't to the ones I have, it was just an example,
I bought mine many years ago, don't know the brand name,
google search Vix bit...nice self centering drill bit...
pete campa cheers micks