How to fit concealed hinges for inset door (blockscribe jig)

Hello folks and thanks for joining me on this video..
in this one i give you a quick look over how i go about fitting/installing concealed hinges for inset doors.
as always i will link all the relevant links below i do hope you enjoy the video and stay safe
/ lowes-bespoke-joinery-...
/ channel
/ lowesjoinery
www.theblockscribe.co.uk/ the jig for setting hinges
please use the 15% discount on there website use code ( lowesjoinery15 )
www.trade-hinges.co.uk/
the actual hinges I used
www.trade-hinges.co.uk/soft-c...
#concealedhinges #blumhinges #howto

[@benelevate]

Every time I install cabinet doors with these scribes I always use this video as a refresher. It’s excellent. Don’t ever delete it!

[@Apocalypse_666]

How would you measure this if you did not have the jig?

[@aaronmoseley5408]

Great video, I found this to be the most helpful and informative of all the YT vids out there on this subject, simple and straightforward, cheers mate 👍

[@MixingGBP]

These hinges are always satisfying to see and adjust

[@rodgerq]

Blum stuff is great! Good video, that wee jig is great

[@stevenking6550]

Great vid... just what I was looking for.

[@stephenlomas8555]

Really good informative and handy piece of kit. Cheers and keep posting your clips.

[@lowesjoinery3031]

Thanks mate 😀

[@archiehuck4831]

Great info, cheers, keep up the good work 👍🏻

[@badrinath6059]

Excellent video on Hingies installation

[@lowesjoinery3031]

Thanks very much

[@nicowilson]

Superb video. Comprehensive, with good explanations.

[@lowesjoinery3031]

Thanks mate made this ages ago glad you like it

[@KIMKim-ql8zx]

Super!
Great description

[@Studio57production]

Great information, and to the point. 👍

[@stepheno2462]

Great video, exactly what I was looking for

[@lowesjoinery3031]

Cheers mate

[@gavinspalding]

Great video! Im building a shelving unit with cupboard at the bottom out of scaffold boards. Would like an inset install, but not sure with the thickness if the boards...... Any advise?
Deffo getting the little jigs!!

[@adnanlami5373]

Thanks for the information just quick question i have a 22mm thick doors how much I need to measure from the edge of the door to the centre of the hinge

[@nickprice9562]

Cracking video mate, thank you

[@lowesjoinery3031]

Thanks 👍

[@ecofitters252]

Brilliant vid mate 👍

[@lowesjoinery3031]

Thanks mate

[@danfdz7862]

nice & simple. gr8 video

[@lowesjoinery3031]

Thank you! Cheers!

[@robertkavanagh8202]

hi could you answer a question i have 18mm shaker door and a side panel which 22mm what hinge will be required to bring the door flush with that out side panel

[@triumfdula8830]

What was the total distance from the edge of the mounting plate screws, and what sort of screws where they?

[@vimagemedia7962]

Thanks for the guide. I had already bought my hinges. Couple of things I noticed. I fitted my doors to a void storage in the wall which had a frame around it. My hinges kept going back, is that normal as I needed to fit a stop rail to make them stay flush. I also read somewhere to get an even reveal top and bottom to do for example 98mm on the door but 100mm on the frame but the top hinges lined up and the bottom didn't so I had to redo the bottom hinges. It confused this amateur. 🤔🤣

[@garrettp6942]

Great video - try keeping music volume uniform with rest of the audio

[@kennethhunt6270]

Thank you for this video, it taught me a lot.

[@lowesjoinery3031]

Glad it was helpful!

[@gferguson73]

Have u got links for both jigs please

[@madforit9661]

I would like some feedback on what track saw you would recommend for me. I do general wood working , not as a job but always like to make stuff. I know Trend is a good make and I think you have one,. Also never used one before, what track would you say to buy if it doesn't come with the saw. Cheers

[@lowesjoinery3031]

Iv only used 2 the festool one I have now and the erbauer one before that... I have a video on it if you want to look... also check out Peter Millard channel @10minute workshop he has some really in-depth vids on them and other brands .. the erbauer one was a bloody great saw and came with track would be perfect for diy..

[@jasmin9880]

Hello. I was watching one of your videos yesterday. You Hanging a oak veneer door. I like to know what drill bit you used to make the holes in the veneer door for the handles and things. Tbsnk you.

[@lowesjoinery3031]

Hey they was just a cheap set from screwfix forstner bits

[@ovsannagarabedian5617]

Thank you so much! Would this work on a cabinet door that is a bit curved?

[@aaronbates500]

A bit curved doesn't work on inset doors.

[@danthechippie4439]

Great video, I don't have the plastic jig, is there a way of calculating how far to measure in the distance for the mounting plate for a 27mm door?

[@bj27filly]

I have to exact same question.

[@garvielloken3929]

Noooice!

[@jessemackin6875]

just used my blockscribe jig and the plate position doesnt workout. blum states T(18mm)+ 38.5 giving 56.5mm but the hinge jig measurement is 54mm (for 18mm door). so having to fully wind it back and door sits just over the face frame

[@66journeyman]

So you use the same hinge for both 18 & 22 doors and marked out respectively?
Nice little video Arran👍🏻

[@lowesjoinery3031]

Yes mate one jig does all preety good and they have gave me 15% off to anyone that uses the code

[@sylvia6785]

Where did you get your cordless screwdriver please?

[@CM-1723]

Can you not just measure the internal mount holes by tape measure and a square ? I've already got cup holes in my doors and bought some inset hinges

[@MatSmithLondon]

Can these be used for larger understair doors? e.g. if you use 3 hinges per door?

[@MatSmithLondon]

Ugh - I’ve answered my own question. Yes they can but so much to think about with inset doors with irregular shapes. I’ve made my own CZcams vids on this subject now!

[@jacklanglois3744]

Great video but what if im using 15mm mdf (small doors) and the jig only specifies 18 and 22mm doors?

[@joshgolo]

Did you figure this out im also using 15mm doors

[@Sarah_Faber]

I believe you just measure back from the edge 15mm

[@cball97]

Great video! Where did you buy the Jig?

[@lowesjoinery3031]

Blockscribe... use code lowesjoinery15 for 15% off

[@sylviacollins8789]

I want to know where I can obtain the inset hinge jig. I don't see any on Amazon? Could yiu assit me in finding the jig? Thank you Thomas

[@lowesjoinery3031]

www.google.com/url?sa=t&source=web&rct=j&url=www.theblockscribe.co.uk/product-page/inset-hinge-jig&ved=2ahUKEwiSjYmz-O7uAhVSY8AKHbHACvsQFjAAegQIARAB&usg=AOvVaw3QQoQiQJXZ4fAEJB7sdZV_

[@jordanlamb6102]

Having the same inset doors in my kitchen shaker style but I have a tall integrated fridge and a tall integrated freezer and the hinge is too bulky and they won't open fully without banging on the hinge. Do you have any suggestions to what concealed hinges I can use. Thanks

[@johnroberts6251]

www.trade-hinges.co.uk/blum-appliance-hinge-277-p.asp

[@freddythefrog9154]

2.41 - 'canrn't' 🤣🤣

[@evelyniwono565]

How do I build a wall desk?

[@user-tt3hh8oq4e]

What do I do if I don't have any jig?

[@lowesjoinery3031]

Buy one