This HINGES JIG works perfect to Install Concealed Cup Hinges
Vložit
- čas přidán 31. 05. 2024
- Let's see how to use a concealed hinges jig to install shelf and cabinet doors. Concealed cup hinges seem to be the kind of hardware that is very difficult to install, but with this simple woodworking jig we can install cup hinges easily in cabinets and shelf doors. I show how to use this amazing woodworking jig step by step and I also show some of my tricks.
You can find here this jig to install concealed hinges:
geni.us/guiabisagrascazoleta-1 (Amazon)
The drilling jig that I use to drill the holes with the Forstner bit:
geni.us/guia-taldr-movil-1 (Amazon)
The kit to connect the vacuum cleaner hose to the drilling jig:
geni.us/adapt-asp-guia-taldr-1 (Amazon)
And some useful drill depth stops:
geni.us/topesprofundidad-1 (Amazon)
As an Amazon Associate I earn from qualifying purchases.
In this woodworking video you can watch:
00:00 The doors and the concealed hinges that I will install.
00:24 How to use the concealed cup hinges jig.
04:39 How to drill the holes for the cup of the hinges.
06:01 I install the doors with the concealed hinges.
09:53 Adjusting cup hinges and doors.
10:21 I finish installing the doors.
13:09 About the screws that I use to install the concealed hinges
Such a good teacher, you never say "this is the way it should be done".
You say "this is the way I do it & here is why I do it this way".
You teach by example & leave it to the viewer to decide if they also agree.
I think you are fantastic, thank you!
Thank you very much 😀. It was my first time using this kind o hinges jig, so I wanted to show everything I had to do to install the doors 😀
School enxampl of detailed explanation. Good work Sir Thank you very much.🎉
Thanks to you and your video, I managed to fit hidden hinges to three cabinets first time I've given it a try.
Clear instructions. the 35mm hole is21.5mm away from the edge, the hinge holder has a setback of 37mm, as seen on your jig.
i thankyou. now i have a better knowledge of how to put back one of my hinges
Excellent video, very well explained about concealed hinge installation. Thanks alot
Amazing video!!! Thank you very much!
Very good and detailed explanation. Thanks
It's very easy way of assemble door hinges
Very useful tutorial, thank you! 👍🏻
Thank You...great Demonstration
Well done!!!!! Thank you for the lesson!!!! Much appreciated!!!! 😃🙏👍😎
To the point ,clear instructions. My hinges are mounted first try with out any mistakes. Thank you.
Very much useful tutorial, and well explained in each and every steps of mounting the cup hinges.
Thank you very much and thanks for watching 😀
A great video, very informative 👍
This is brilliant best video for hinge fitting 👏.
Thank you very much 😀
6:26 hint: just push a straight piece of a laminated board or any other straight edged piece of wood against the flat sides of the hinge caps, and they will auto-align. You then drill the pilot holes and screw-in the screws. You might want to use a self centering drill bit as well to speed up the process.
I love your clips and I hope all is well for you and those you love in the new year and years to come.
Thanks again for sharing knowledge with others!
Great job, this is very good for beginners. You really took the time to elaborate on the steps
Super merci beaucoup pour la vidéo
You always explain and teach clearly and simply, well done Sergio.
Thank you very much Jim 😀
Excellent , thank you and bravo👏👏👍👍❤ Friendship to France
Thank you very much and thanks for watching 😀
Great video, very informative! I especially admire you for doing it in English - that’s really impressive and can’t be easy. Well done! 👍
Super Pro I want this one
Finally a tutorial step by step. Thank you very much now I can install with confidence. BEST VIDEO SO FAR!
Grazie. Molto preciso e chiaro.
Looks very good
14:29 there are ready-made mounting plates with 6mm screws installed. They are called euro-screws and they have threaded section followed by a smooth narrower neck. Once you screw them all the way in inside a pre-drilled standard 5 mm hole, you reach the neck section, which allows you to easily move the plate up and down. To make it more clear, checkout the Blum 173L8100 part. Similar plates can be found from other manufacturers.
Muchas gracias amigo
Well done.
Where can I get a jig like that??
Le mieux c'est les vis "euro" à bientôt salut Jeannot 😉🛠
Nice job. I suggest to use two same jigs to ensure that the door is perfectly parallel.
Yes, having another jig would help to align the door with the shelf. Thank you very much 😀
perfect!!!!
J'adore vos vidéos TRÈS bien expliquées et très détaillées.
Par contre, lors de l'utilisation du gabarit pour pointer et percer le trou de 35mm, pourquoi n'utilisez-vous pas les deux autre repères du gabarit pour les vis ? (2 trous à 28 mm du bord avec un espacement de 32 mm).
Ist a nice jig. Well done. 👍
Yes it is. And it is very easy to use 😀
gracias
Good video very informative!
Thank you very much 😀
bpavo special informetion!
Would the jig in the description work for inset doors or only the ones show? Thanks for the subtitles as well.
No, I think they won't work for inset doors. Because due to the position of the door, in inset doors the distance from the edge of the board to install the mounting plate of the cup hinge is bigger.
Nice video
Thank you very much 😀
Hello! You did it but based on my experience I think you have maybe choosen more complicated apporoach. Usually you don't mount it all together but you mount separatelly the plate and separatelly the 35mm hinge. You mark the spot for the 35mm hinge than make the holes and than put both hinges in the holes and than push the long straight board or ruler against the straight part of the hinge - it is self oriented in that way (try it, you'll see what I'm talking about).
Thanking for speaking in English!
Thanks for watching 😀
Dónde comprar está plantilla ,gracias .
Eres español?, ese inglés me suena muy español jajaj
Plastic spacer thickness?
Nice video. Where can l buy the tool?
Very helpful, but the left hand hinge cup is off center and there is a gap between the hinge and the hinge cup. This is not a job that I think I could do.
It is much easier and faster than here.
this plastic jig should provide where to drill for the cup and at the same time the screws, you don't have to drill the 35 mm hole then use the hinge to locate where to drill for the screws, isn't it?
Not with the cup hinges jig that I use in this video. I have to use the hinge to locate the position of the screws to the side of the cup
Good tutorial video..but your screw driver is so short it feels awkward for me.
Where can I buy this jig please?
I'm not sure if they sell it outside the European Union. But by searching the internet for a jig to install cup hinges you will surely find it, or at least similar models. Just make sure it serves to install the model and size of cup hinges you want to install.
@@WoodworkingwithDIYtools OK luckily I have a home in Spain 🇪🇸 😁
I love the video but you have to get rid of those gloves
Such a annoing voice 😂😂😂