The pulley has broke and made the belt come off its place. Has stalled within seconds by making a whining noise. Then roadside has tried starting with troubleshooting but later realised the issue of the pulley after opening the cambelt cover. Do you think the starting during troubleshoot must have caused more damage to engine? Does just pulley change fix the issue as the belt seems to be fine? Any more testing needs to be done after fixing the pulley? as the car is sat in garage for 4 weeks with no definite answer on whats going on with it. Help much appreaciated, TIA.
Hi, thank you for watching and for your feedback. You have 2 options depending on your skill grade, option 1 fit the old belt and new pulley ( don't try and start the engine ) then compression test all 4 cylinders, that will show if any valves are damaged / bent and which cylinders they are on, you will need to turn the camshaft gently by hand ( spanner ) to align timing pins to fit and time, the crankshaft may need to be turned as well, don't force either. That is how I would start even if I had to take the head off after. Option 2 take the cylinder head off and check for any damage / recondition whichever option you choose I would recommend replacing / renewing the belt / pulley's and water pump before finishing. Feel free to ask more questions or discuss if needed.
In this video, at 7:47 what is that thing that looks like a dip stick? I know it's not a dip stick, but what is it for? Also, on my XF (X250 like this one) there's a cable underneath what i assume is the fuel filter (also seen if you pause at 7:47 ) and the cable is unplugged and i can't see anywhere to plug it in! Any ideas?
Hi, thank you for watching and for your feedback. It's a siphoning tube, when changing the oil you connect a rubber tube to it and suck the engine oil out of the sump, saves dropping the under tray ( video "Jaguar XF 2.2 diesel oil and filter change using siphon method". ). If you watch my video "Jaguar XF blocked fuel filter" It explains where the bottom electrical plug goes. The plug in the video has a place to push into but is not connected electrically so does not matter.
Great video! I have rhe delightful task of changing cambelts over on my Jag and my Seat Leon next week 🥹🫣 I have a stupid question.....when you've fitted the new belt etc, when turning the engine over by hand, with it being an automatic do you have to do anything with the gears such as put into neutral instead of park? Or does it not make a difference? Ive never really had to work on an automatic before hence the reason i ask the stupid question 🫣
Hi Dan, thank you for watching and for your feedback. A question is never stupid, It's how we learn new things. With an automatic I leave it in park but it does not make a difference which position you put it in.
Good evening, I have a question for you. If a 2015 car with a 2.2 engine has only driven 10,000 miles, but the timing belt is already 9 years old, is it safe to continue driving? The car has been kept in a warm environment with temperatures ranging from +20 to +25 degrees Celsius year-round. What do you think?
Hi, thank you for watching and for your feedback. I would change the timing belt, 9 years is in the Jaguar recommended time frame to change and why take the risk? Most of the timing belts I have changed have always visually looked in good condition but have been under tension for the number of years fitted or mileage covered. I don't have the equipment to test belts for longevity so have to rely on Jaguar recommendations.
@@crystalclearmechanics I agree that taking an unnecessary risk isn't worth it. However, I want to approach things wisely and with arguments, rather than blindly relying on recommendations, as they always take into account extreme operating conditions, which are absent in this case. It’s logical to assume that an item used by any person can look completely different after 10 years. And when giving any maintenance recommendation, the manufacturer will always cater to those who have used the item more harshly or in more severe conditions. This also makes sense to me.
@@sepe6a Hi, I would suggest you contact Jaguar and the belt manufacturers technical departments for advise on your specific concern. Who better to ask?
I did my cambelt today on my jaguar 2.2. The tention was about 5mm off. (BEFORE THE GAP) I had no problems until i fitted the new cambelt. I turned the the tentioner anticlockwise until the pointer was in the middle off the notch and torck it to 25nm. Then i turned the crankshaft a couple off times to check the timing. This was ok butt the pointer was to far. I adjusted the tention again, turned the crankshaft and have te same problem. After 3 attemps the pointer stays in the middle of the gap. Then i turned the crankshaft several times because i was affraid I did something wrong. After the work was completed the engine runs fine. I wonder if it is necesary to check the tention after a while? And if so, will it undo the timing? Enyone to help me? Thanks a lot.
Hi Dirk, Glad you managed to do the belt. If you have torqued the tensioner bolt / nut correctly and the pointer was in the right place and turned the engine over a couple of times and all is still spot on then that is the job finished. You will not need to check it again, thanks again for watching.
Good video! I"m looking for a good video long time but never find a good one. Some idiots block the crankshaft with a screwdriver! Dit you replace the coolant compleet or just fill up? Radiator draining is not easy because the plug is difficult to reach. Can you give me the torck specs for the crankshaft bolt? Somebody told me 70nm + 80°. Hard to see on a gauge below the narrow space . My jaguar dealer ask me €1200,00 for the job! The car has 50000KM in 9 years. I dont know the intervals.Many thanks. Greetings from Belgium.
Hi Dirk, thank you for watching and for your feedback. I drained the coolant and refilled it. The Jaguar manual gives 2 torque settings, 1 says 70Nm + 82 degrees using a new bolt, the 2nd say's use the old bolt and torque it to 70Nm only. I have had discussions with Jaguar workshop mechanics about this conflicting advice and they said and I agree it should be 70Nm + 82 degrees with a new bolt. Clean the thread in the crankshaft by wire brushing the thread on the old bolt and screw it in and out whilst cleaning it until you can screw it in with your fingers then the new bolt will tighten easily. It is a very easy job, the crankshaft locking tools I use were from Sealey. I used to buy a lot of cars in Belgium back in the 1970s - 1980s, great country.
@@crystalclearmechanics thank a lot for your info. Now i can order te tools and parts. It safes me a lot of money. Your video is the onlyone that gives a good and clear information. I was a little nerveus for undo the startermoter. Greetings, Dirk Vanbesien
Hi Simon, Thank you for watching and for your feedback. The pin to time the crankshaft fits in the driveplate / flexplate ( between 13.34 minutes and 14.34 minutes.
@@dansmith2097 Hi Dan the hole in the driveplate is probably slightly out of line with the cams, remove the cam pins and then move the crank slightly both ways keeping pressure on the pin until it slots into the hole in the driveplate.then put the cam pins in place moving them slightly with a spanner on the cam sprocket bolt. Let me know how you get on.
That fuck… Camshaft bolt it’s a nightmare make sure you get 22 size spanner that fit between radiator and bolt it’s a nightmare !!! I’ve got 3 different spanner’s won’t fit 🔥I’m fuc… stock
You need a special spanner to get enough space between that camshaft bolt and radiator.. also that bolt is a nightmare to unscrew take me 3h because spanner was too thick between radiator and bolt
Hi John, thank you for watching and for your feedback. The 22mm crankshaft bolt does have resistance until completely out due to the factory threadlock that is applied. I use a 22mm socket with a reversible ratchet torque wrench, once the bolt is out ( 5 minutes ) it is recommended to use a tap to clean out the threadlock inside the crankshaft, I use the old bolt and wire brush the threadlock off then reinsert it a few times cleaning the threadlock off each time until the bolt can be screwed in with my fingers. The recommended torque is conflicting, Jaguar say when fitting a belt, to use the old bolt with a torque of 70Nm yet when fitting the front pulley / damper they say use a new bolt ( £6 from Jaguar ) and torque to 70NM + 82 degrees. I use a new bolt and torque to 70Nm + 82 degrees. Sorry to hear you had so much trouble.@@johnmcgregor2334
These videos are out standing real information keep up the good work help me out massively on my jaguar 2015 2.2 diesel.
Hi Wayne, Thank you for watching and your great feedback. Glad the video's help.
I wish that you had put this video last week, i did mine last saturday and it was an experience i dont want to do again. 😂
Hi Alan, thank you for watching and for your feedback.
Thanks for the video 😊
Hi, thanks for watching and for your feedback.
The pulley has broke and made the belt come off its place. Has stalled within seconds by making a whining noise. Then roadside has tried starting with troubleshooting but later realised the issue of the pulley after opening the cambelt cover. Do you think the starting during troubleshoot must have caused more damage to engine? Does just pulley change fix the issue as the belt seems to be fine? Any more testing needs to be done after fixing the pulley? as the car is sat in garage for 4 weeks with no definite answer on whats going on with it. Help much appreaciated, TIA.
Hi, thank you for watching and for your feedback. You have 2 options depending on your skill grade, option 1 fit the old belt and new pulley ( don't try and start the engine ) then compression test all 4 cylinders, that will show if any valves are damaged / bent and which cylinders they are on, you will need to turn the camshaft gently by hand ( spanner ) to align timing pins to fit and time, the crankshaft may need to be turned as well, don't force either. That is how I would start even if I had to take the head off after. Option 2 take the cylinder head off and check for any damage / recondition whichever option you choose I would recommend replacing / renewing the belt / pulley's and water pump before finishing. Feel free to ask more questions or discuss if needed.
In this video, at 7:47 what is that thing that looks like a dip stick? I know it's not a dip stick, but what is it for?
Also, on my XF (X250 like this one) there's a cable underneath what i assume is the fuel filter (also seen if you pause at 7:47 ) and the cable is unplugged and i can't see anywhere to plug it in! Any ideas?
Hi, thank you for watching and for your feedback. It's a siphoning tube, when changing the oil you connect a rubber tube to it and suck the engine oil out of the sump, saves dropping the under tray ( video "Jaguar XF 2.2 diesel oil and filter change using siphon method". ). If you watch my video "Jaguar XF blocked fuel filter" It explains where the bottom electrical plug goes. The plug in the video has a place to push into but is not connected electrically so does not matter.
@@crystalclearmechanics Thank you for your reply and clearing that up! Much appreciated!
Great video! I have rhe delightful task of changing cambelts over on my Jag and my Seat Leon next week 🥹🫣
I have a stupid question.....when you've fitted the new belt etc, when turning the engine over by hand, with it being an automatic do you have to do anything with the gears such as put into neutral instead of park? Or does it not make a difference? Ive never really had to work on an automatic before hence the reason i ask the stupid question 🫣
Hi Dan, thank you for watching and for your feedback. A question is never stupid, It's how we learn new things.
With an automatic I leave it in park but it does not make a difference which position you put it in.
Good evening, I have a question for you. If a 2015 car with a 2.2 engine has only driven 10,000 miles, but the timing belt is already 9 years old, is it safe to continue driving? The car has been kept in a warm environment with temperatures ranging from +20 to +25 degrees Celsius year-round. What do you think?
Hi, thank you for watching and for your feedback. I would change the timing belt, 9 years is in the Jaguar recommended time frame to change and why take the risk? Most of the timing belts I have changed have always visually looked in good condition but have been under tension for the number of years fitted or mileage covered. I don't have the equipment to test belts for longevity so have to rely on Jaguar recommendations.
@@crystalclearmechanics I agree that taking an unnecessary risk isn't worth it. However, I want to approach things wisely and with arguments, rather than blindly relying on recommendations, as they always take into account extreme operating conditions, which are absent in this case. It’s logical to assume that an item used by any person can look completely different after 10 years. And when giving any maintenance recommendation, the manufacturer will always cater to those who have used the item more harshly or in more severe conditions. This also makes sense to me.
@@sepe6a Hi, I would suggest you contact Jaguar and the belt manufacturers technical departments for advise on your specific concern. Who better to ask?
Is this engine non interference if it snaps?
I did my cambelt today on my jaguar 2.2. The tention was about 5mm off. (BEFORE THE GAP) I had no problems until i fitted the new cambelt. I turned the the tentioner anticlockwise until the pointer was in the middle off the notch and torck it to 25nm. Then i turned the crankshaft a couple off times to check the timing. This was ok butt the pointer was to far. I adjusted the tention again, turned the crankshaft and have te same problem. After 3 attemps the pointer stays in the middle of the gap. Then i turned the crankshaft several times because i was affraid I did something wrong. After the work was completed the engine runs fine. I wonder if it is necesary to check the tention after a while? And if so, will it undo the timing? Enyone to help me? Thanks a lot.
Hi Dirk, Glad you managed to do the belt. If you have torqued the tensioner bolt / nut correctly and the pointer was in the right place and turned the engine over a couple of times and all is still spot on then that is the job finished. You will not need to check it again, thanks again for watching.
Good video! I"m looking for a good video long time but never find a good one. Some idiots block the crankshaft with a screwdriver! Dit you replace the coolant compleet or just fill up?
Radiator draining is not easy because the plug is difficult to reach. Can you give me the torck specs for the crankshaft bolt? Somebody told me 70nm + 80°.
Hard to see on a gauge below the narrow space . My jaguar dealer ask me €1200,00 for the job! The car has 50000KM in 9 years. I dont know the intervals.Many thanks.
Greetings from Belgium.
Hi Dirk, thank you for watching and for your feedback. I drained the coolant and refilled it. The Jaguar manual gives 2 torque settings, 1 says 70Nm + 82 degrees using a new bolt, the 2nd say's use the old bolt and torque it to 70Nm only. I have had discussions with Jaguar workshop mechanics about this conflicting advice and they said and I agree it should be 70Nm + 82 degrees with a new bolt. Clean the thread in the crankshaft by wire brushing the thread on the old bolt and screw it in and out whilst cleaning it until you can screw it in with your fingers then the new bolt will tighten easily. It is a very easy job, the crankshaft locking tools I use were from Sealey. I used to buy a lot of cars in Belgium back in the 1970s - 1980s, great country.
@@crystalclearmechanics thank a lot for your info. Now i can order te tools and parts. It safes me a lot of money. Your video is the onlyone that gives a good and clear information. I was a little nerveus for undo the startermoter. Greetings, Dirk Vanbesien
You don't show where the pin goes for bottom crank
Hi Simon, Thank you for watching and for your feedback. The pin to time the crankshaft fits in the driveplate / flexplate ( between 13.34 minutes and 14.34 minutes.
@@crystalclearmechanics does the pin slot into a hole in the drive plate? I can't seem to find a hole which it fits/locks into 🥺
@@dansmith2097 Hi Dan the hole in the driveplate is probably slightly out of line with the cams, remove the cam pins and then move the crank slightly both ways keeping pressure on the pin until it slots into the hole in the driveplate.then put the cam pins in place moving them slightly with a spanner on the cam sprocket bolt.
Let me know how you get on.
Sorry mate after watching this I forgo the hundreds of dollars and got a expert to replace it :)
Hi, thank you for watching and for your feedback.
😂😂😂😂😂
Is this 2.2 Diesel engine ?
Hi, thank you for watching and for your feedback. Yes it is the 2.2 diesel engine.
That fuck… Camshaft bolt it’s a nightmare make sure you get 22 size spanner that fit between radiator and bolt it’s a nightmare !!! I’ve got 3 different spanner’s won’t fit 🔥I’m fuc… stock
You need a special spanner to get enough space between that camshaft bolt and radiator.. also that bolt is a nightmare to unscrew take me 3h because spanner was too thick between radiator and bolt
Hi John, thank you for watching and for your feedback. The 22mm crankshaft bolt does have resistance until completely out due to the factory threadlock that is applied. I use a 22mm socket with a reversible ratchet torque wrench, once the bolt is out ( 5 minutes ) it is recommended to use a tap to clean out the threadlock inside the crankshaft, I use the old bolt and wire brush the threadlock off then reinsert it a few times cleaning the threadlock off each time until the bolt can be screwed in with my fingers. The recommended torque is conflicting, Jaguar say when fitting a belt, to use the old bolt with a torque of 70Nm yet when fitting the front pulley / damper they say use a new bolt ( £6 from Jaguar ) and torque to 70NM + 82 degrees. I use a new bolt and torque to 70Nm + 82 degrees. Sorry to hear you had so much trouble.@@johnmcgregor2334