FordPass Stopped Working 2017-2020 Ford’s
Vložit
- čas přidán 9. 07. 2024
- This video shows how we diagnosed and fixed a 2019 Ford Edge that the FordPass system stopped working on. Shows how special service message SSM 50251 is performed.
- Auta a dopravní prostředky
You are the best! i had this same issue and called ford tech support and they could not fix it, they scheduled me an appointment for dealer , then i found your video and it fixed it, needless to say i cancelled the appointment
Thank you Sir. Just did this on my 2019 EcoSport (British right-hand drive model).
Fuse box beneath glove compartment behind kick plate, 5 Amp fuse F11/F12 (Ford three-legged fuse).
Pulled for 10 mins and replaced. Modem now shows serial number and works 👍🏻
You’re welcome. Glad to hear it!
THANK YOU SO MUCH for making this video!!! I was having this exact issue (Could not locate vehicle) with this exact vehicle (2019 Ford Edge). While I was not able to reach the fuse I did disconnect the battery for a half hour (as stated in your reply to one of the comments) and it resolved my issue, as well. Thank you, again!!
Glad it helped
Thank you! Ford gave me an estimate for $1200 to replace the APIM. I declined and instead bought one off eBay and had it programmed. I just installed it and had same problem. I discovered this was the problem and followed instructions and it works now! Thanks for saving me money and my sanity!
Glad it helped!
Thanks for saving me the hassle of talking to a dealer to fix this. Did it for my 2019 Edge. I hope you have a great weekend.
Glad it helped!
Thank you so much for this!! Called Ford and AT&T and neither of them were of any help. Was told to make an appointment at the dealership who was going to charge a lot to diagnose and fix. Your video took me 10 minutes to complete and get my hotspot fixed!
You’re welcome, glad it helped!
Thank you for this information, Fordpass will now connect to my 2019 Edge ST after pulling the fuse and allowing the unit to reset.
Glad it helped.
Nice to know about just power cycling module.
Thank you just did mine saved me.some $$$$$$
Glad it helped!
on a 2017 ford escape SE? what fuse would I pull? 67 the Sync fuse location?
Do i need a stock head unit or the stock radio for my 2018 XLT 6.7 diesel/superduty?
Where is that fuse on a 2020 f150?
Thanks this worked,hand is a little scratched reaching in to remove and replace fuse. I was on the phone for well over an hour yesterday and was passed off to 2 other people . Came back and said the module was not communicating so I needed to take it in to a dealer. I looked on line for fixes and found several such as master reset, open door lock and unlock, none worked. Opened CZcams this morning and your video was in my que. Great step by step and explanation. Only question is the updates I do not process the code reader and setup you have, will this update itself somehow?
Ford is doing some over the air updates on vehicles as long as automatic updates is turned on. I hadn’t given it any thought, but yes maybe.
Thank you for the info. My Ford pass hadn't worked on my 2019 Fusion for 3 months. I tried this, and it worked perfectly. It's the same fuse in the same spot, but the Fusion doesn't have the access panel on the front side of the dash. It took some maneuvering to get up in there.
Glad it helped
When you pulled the fuse for the fusion did it cause any other issues or did you have to do anything else when you put the fuse back?? My 2019 fusion moden just stopped responding last month and idk what to do..
@@MrRomeogod99 I did as the guy in the video said, and everything worked fine. No issues.
@errickkitchin36 did you connect it to a computer to check for updates?? Im thinking about doing it today to try to fix it, the dealer want too much, my car only has 36k on it
@@MrRomeogod99 Mine has wifi. So I connected the car to my home wifi and checked.
You should h e more subscribers you’re good at what you do brother
Thanks!
Good video. When you pulled the fuse was the car off or on? And did you leave the vehicle unlocked?
I can’t connect to my car via FordPass however wireless Apple CarPlay seems to work along with Bluetooth but I can still see my ESN number in the about menu.
That’s probably not the problem if you can see the ESN. The car should be off when you pull the fuse.
Bluetooth is through the sync module, Fordpass goes through telematics (cellular modem). Two different things.
Anyone know if a 2017 Ford Explorer Sport is compatible with Fordpass?
I don’t think it is.
Is this going to stop the freezing I experience with sync 3 on my 2020 ford escape? I always have to press and hold the power button and forward skip buttons to get sync to reset and back working for only a couple of hours then I would need to repeat this again after a freeze.
Usually that indicates an issue with the APIM, so probably not.
Hey, would disconnecting the battery do the same job?
I’ve read in forums that also fixes it. Just wondering if that would be easier if I have to do this repeatedly lol
I think it would do the same thing.
Could the same thing be achieved by unhooking the battery for 5+ minutes? We are have this issue plus the car defaulting to fm radio and sometimes a blank screen. Happening all of a sudden.
I would think that would do the same thing, yes.
@CarShopTalk I drive a 2019 fusion and am having the same problem. I pulled the keypad fuse like you said in the video and it didn’t seem to solve the issue. Is there another fuse that I need to remove? Any help is appreciated.
Does it display the modem serial number in the about sync screen?
@@CarShopTalk it doesn’t… looks just like your video where it is blank
@@bshamala9900 try unhooking the battery for half an hour.
Where did you get 18-inch 45 degree bent needle nose pliers?
They’re snap on
Just as good as a three foot arm with four elbows and a monkey wrench.... Stay safe, Tim...
Gonna try this on the used 2019 Ranger I just got... No ESN shows... Thanks
I tried to isolate the proper fuse... I took out two without success... I then opted to disconnect the negative battery terminal for ten minutes....presto!!! The modem was then listed. I then had to uninstall and reinstall the Android Ford Pass app. Everything is working just right... Thanks for the inspiration... Stay safe, Tim
@@timdex91 Glad you got it working!
This vehicle you’re filming is a 2019 ford edge?
Yes, it was
What year? Cuz fuse 5 is the 10th spot ? Mine is a 2019
The 7th spot on mine is a 10a and says it’s a spare not used
Spot 10 says 5a
Keypad
Powerlifting module logic power
Hands free liftgate module
@@kimberlyasebedo5708 7th row from the bottom, counting up, right side. Should be a 3 blade fuse. I just looked it up in the ford wiring book. It’s correct.
Have
Just did second 21b10 at the dealer for shitty trannie shafting and rattle. Can tell they don’t wAnt to fix it 55k miles 3.5tt
21B10 is the pcm software update for cam phaser rattle at start up. If it still has a rattle for 6 or 7 seconds on start up afterwards, there’s a second recall, and I don’t remember the number of the recall off the top of my head, to replace the phasers. It only covers free phaser replacement to 60k miles. After that it’s prorated / cost is split with the customer. If you’re local dealer won’t do it I would find another dealer or call Ford customer service. I’d do it soon before you get too many more miles on it. Parts have been on back order a lot for phaser replacement so I’d want a record of continued start up rattle below 60k. If it was me, I would probably call Ford customer service, that way there will definitely be a record of the complaint, they’ll call the dealer asking why this hasn’t been repaired, and probably have a three way call with you and the dealer to schedule this and resolve the issue. I think the phone number is at the very back of the owners manual. Hope this helps.