How to fit VW T5 & T6 barn door windows
Vložit
- čas přidán 8. 07. 2024
- Heritage Parts Centre is a classic and custom Volkswagen automotive parts specialist, based in West Sussex. Heritage is passionate about vintage cars, and currently the largest provider of classic VW parts in the UK. Heritage Parts Centre: Run by enthusiasts, for enthusiasts.
Visit: www.vwheritage.com and use discount code GDUBTV to get 5% off from the Heritage Parts Centre website.
TIMECODES FOR INSTALL STEPS
1. 03:33 - Preparing, drilling & cutting the panel
2. 06:02 - Tidying the cut panel
3. 06:42 - Preparing & bonding
4. 12:23 - Feedback
**DISCLAIMER**
I'm not a professional - If you choose to copy how I install the windows I accept no responsibility for any accidents you may encounter!!!
PRODUCTS USED IN THIS VIDEO
Windows, trim & fitting kit: j.mp/350zKLG
Workbench: amzn.to/34XbSJ4
Window suckers: amzn.to/2qfLaN2
Electric drill: amzn.to/2CJscRy
Drill bits: amzn.to/2XiRmzK
Jigsaw: amzn.to/3563WoY
Heavy-duty metal cutting blades: amzn.to/2KpxMNo
Marker pen: amzn.to/2COnVMA
Ruler: amzn.to/2NPcNFx
Sockets set: j.mp/371qfOe
Assorted sandpaper: j.mp/3790cVp
Mastic gun: amzn.to/33THmiY
Frogtape: amzn.to/2XrhLvH
Link to my merch store (t-shirts, hoodies, etc.) j.mp/GDUBmerch
If you've found my channel helpful you can buy me a coffee via ko-fi.com/gdubtv
VIDEO GEAR USED
Main Camera: Sony A7iii amzn.to/2Viwtny
Tripod: Manfrotto 190 Go amzn.to/2KCjmX6
Microphone: Rode VideoMic Pro+ amzn.to/2vvjGCv
Deadcat: Rode VMP+ j.mp/3589QGZ
GorillaPod: Joby 5K GorillaPod amzn.to/2vPjY6J
B-roll camera: GoPro Hero 7 Black amzn.to/2Vn6prb
Phone/backup camera: Pixel 2 amzn.to/2N4xquS
Editing Computer: Apple iMac 27” 2018
Editing Software: Final Cut Pro X
Experience more GDUBTV via linktr.ee/gdubtv
Please like, share, comment below, subscribe and most of all... enjoy the journey!
For media or collaboration enquiries please email g.watson79@hotmail.co.uk
Music licensed via SoundStripe: app.soundstripe.com/referrals... - Auta a dopravní prostředky
Nice honest video showing how to fit T5 barn door windows.
Enjoyed the vid mate, top tip for anyone planning to do any windows is to open your front door windows slightly before starting, because if you close your door once the window is in place and create an over pressure inside the van it could move your window and potentially compromise the seal or worse your window might pop off 👌
Thanks for the tip 👍🏼
Nice job Gordon, they look the business mate, looking forward to the next video 😀🤙
Thanks pal 👊🏼😎
Nice job!
Thanks 👊🏼😎
You put this on last week
Deleted it to do some edits, missed some key bits off (was in a mad rush!)
7:49 I thought that was gonna hit the floor into 100000 little peices
Me too, heart stopped!! lol
Nice video, I'm more confident to do my own!!
Great! :)
If you are going to carpet the van inside, how will you hide it under the rubber trim If you have already put it in place? I thought you should carpet first then put the trim around the edge over the carpet to finish it off better then put the glass on. If you are not carpeting then this is okay, well done.
Better with the edits, glad you redid it, hope my comment on your Instagram was received in the spirit it was intended 😎👍🏻
That photo of the primer on the doors, did you redo these windows or is that on your to do list?
Yeah no worries man, was a bit of a bodge!! That photo was from my old T5 project. The barn door windows on the T6 were re-done earlier this week, all sorted now and as they should be!
@@GDUBTV Nice one! Wouldn't want them dropping off, has been seen before where they do.
did anyone else flinch when the glass nearly dropped?
He has the drill on hammer action and the wrong jigsaw blades does not prime bodywork where adhesive goes and cut the trim to short 🤷♂️🤦♂️
Not trying to be negative but this is the worst window fitting video to watch. Everything has been done backwards & the windows will most likely fall out one day. The primer needs to be painted onto the bodywork, the windows are already primed & the stikoflex also need to be applied to the body & then windows pressed & wiggled into position.
Couldn't agree more, poor drilling to start with - no pilot hole & the drill on hammer action ?? Then using the jigsaw looks like he was wrestling with it. the process is there but hand skills & best practice of how to use power tools definitely aren't.
Lol...😂😂😂 Worse window fitting video I've ever watch....
Yep, it was a bit barbaric, but did the job! lol
Good save on the window catch, and pleased you kept in it the video - shows us all the things to look out for and consider when I’ll be attempting this in a few weeks time!
Thanks 👊🏼😎