How to fit a sliding or fixed side window to a VW T5 or T6
Vložit
- čas přidán 24. 11. 2019
- Heritage Parts Centre is a classic and custom Volkswagen automotive parts specialist, based in West Sussex. Heritage is passionate about vintage cars, and currently the largest provider of classic VW parts in the UK. Heritage Parts Centre: Run by enthusiasts, for enthusiasts.
Visit: www.vwheritage.com and use discount code GDUBTV to get 5% off from the Heritage Parts Centre website.
TIMECODES FOR INSTALL STEPS
1. 02:12 - Preparing, drilling & cutting the panel
2. 04:42 - Tidying the cut panel
3. 06:16 - Preparing & bonding
4. 10:06 - Feedback
**DISCLAIMER**
I'm not a professional - If you choose to copy how I install the windows I accept no responsibility for any accidents you may encounter!!!
PRODUCTS USED IN THIS VIDEO
Windows, trim & fitting kit: j.mp/350zKLG
Workbench: amzn.to/34XbSJ4
Window suckers: amzn.to/2qfLaN2
Electric drill: amzn.to/2CJscRy
Drill bits: amzn.to/2XiRmzK
Jigsaw: amzn.to/3563WoY
Heavy-duty metal cutting blades: amzn.to/2KpxMNo
Sockets set: j.mp/371qfOe
Assorted sandpaper: j.mp/3790cVp
Mastic gun: amzn.to/33THmiY
Frogtape: amzn.to/2XrhLvH
Gorilla tape: amzn.to/37B1WXS
Metal files: amzn.to/2D9ckYT
Angle grinder: amzn.to/2riJK4G
Cutting discs: amzn.to/2rhCNkd
Link to my merch store (t-shirts, hoodies, etc.) j.mp/GDUBmerch
If you've found my channel helpful you can buy me a coffee via ko-fi.com/gdubtv
VIDEO GEAR USED
Main Camera: Sony A7iii amzn.to/2Viwtny
Tripod: Manfrotto 190 Go amzn.to/2KCjmX6
Microphone: Rode VideoMic Pro+ amzn.to/2vvjGCv
Deadcat: Rode VMP+ j.mp/3589QGZ
GorillaPod: Joby 5K GorillaPod amzn.to/2vPjY6J
B-roll camera: GoPro Hero 7 Black amzn.to/2Vn6prb
Phone/backup camera: Pixel 2 amzn.to/2N4xquS
Editing Computer: Apple iMac 27” 2018
Editing Software: Final Cut Pro X
Experience more GDUBTV via linktr.ee/gdubtv
Please like, share, comment below, subscribe and most of all... enjoy the journey!
For media or collaboration enquiries please email g.watson79@hotmail.co.uk
Music licensed via SoundStripe: app.soundstripe.com/referrals... - Auta a dopravní prostředky
Just fitted my own window to my vw and used this as a guide, cheers for the video very helpful!
Nice & early video to wake up too, cheers for the work and effort you put into your videos for us, appreciate it matey
Thanks mate, that's a nice comment to start the day with! 👊🏼😎
Anytime mate, just about to do my T5.1 side door, video came just in time, even with our cold British weather your still putting the effort into the videos showing us how easily it can be done, nice one
Hey man great vid. Easy for people to follow. Nice one :)
Thanks 👊🏼😎
Nice one mate, good to see you have listened to people’s comments from the previous video good job on this one pal
Thanks
Another cracking video Gordon, the Dubs really taking shape now 🤙😀
Thanks mate, bit by bit!!
Oil op
Good video. Couple of points to make. When putting the mastic on you want to have one neat continuous line of mastic, that means no gaps and no large blobs just a nice neat continuous line. I noticed when you put the window in it showed and access squeezed out onto the paintwork. This was because of they blobs this you don't want so one continuous no gaps line. Second clean the van surface with acetone before putting primer on helps to remove any oil or wax residue. And third as you did, place the bottom of the window in first as it's easier to get it positioned right this way, if you try to place all the window together a chance you don't quite get position correct. Also have a fire watcher while cutting lot of sparks about and have a fire extinguisher or bucket of water handy just in case. Regards
top man!
I've ordered my windows... now waiting for a sunny day to fit them!
Ooosh!!! 👊🏼😎🚐
How did these windows hold up? Any leaks with the aftermarket sliders?
brave man taking that on good job
Brave... or stupid!! 🤣🤦🏻♂️
Another tip I’d recommend is if you have 2 people get one to offer up the window before you primer it and from the inside draw with a pencil around the window, that way you will get a great line to primer to and add the adhesive too that way standing a better chance of not having leaky windows,
Ps make sure not to block the window drain holes
Good comments 👊🏼
another great video, thanks. Looking for re-fit one my sliding door window next week as the current one has a corner sticking out. Do you put much pressure on the window when pressing it in place ( I want it as flush to the van as poss
It should sit flush, if you're removing the window check it before refitting to make sure it's not out of shape. Also check you've followed the inner skin as tightly as possible, any excess metal could prevent it fitting properly👊🏼😎
@@GDUBTV thanks! I'll be buying new window. Think whoever fitted this window got unlucky with the quality of it
Great Vlog
Aaaaw... I wanted to see what the Finished Inside looks like.
Will do a decent inside video when it's daylight and the poptop roof has been done
@@GDUBTV
Thank you 😃👍
Cut the corner radius first and you will not damage the panel as much and will end up with a neater job. Got to hand it to you tho you get the job done. Good video ..
Thanks pal, I should have used a hole saw, would have been much easier! If I do it again I will, but have done quite a few this way, but makes it a bit harder 🤣🤣
i have the same sliding window, the company who fitted mine didnt fit a bloody rubber trim so it just looks a mess on the inside
Yeah you can carpet trim over the inner edge if you've got the time to, I went for a rubber trim to save on time.
@@GDUBTV Wish i would have known as i would have told them to do the same. even after carpeting it will probably look like a balls up, the window is straight but from the inside the sliders aren't, is yours the same?
Good effort on fitting the window, maybe should try using a flap disc to clean rather the file as that looked hard going?
Also just wondering if you have looked into the new camper van rules? And thinking about doing a video on the subject?
Keep the vids coming enjoy watching
Cheers
Yeah, I'll probably do a video on those new rules soon. Coombe Valley Campers has done a good one, worth checking out!
@@GDUBTV perfect I will go and check it out
@@GDUBTV Agreed, it's the best review I've seen but still leaves questions unanswered. Any refusals since the new rules appear to be based on the ability for law enforcement to identify your van as a camper, so 80's swirly graphics required;-0
Why did you disconnect the battery?
It prevents any current or static shorting any of your electrics or sensors. It’s just a precautionary measure. Probably loads of folk that wouldn’t bother, but it won’t do any harm!
Making hard work of that
4:13 Mulliner Park Ward ?
More like botch it and creep away ltd
F#%k me ya made a messy job cutting out
Yeah, should have used a hole saw and some metal shears!
Try one of these on the next job! rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F301661102631
Nibbler does the cleanest job but file and trim and its fine in the end. Good job! It's all about having the balls to have a go yourself, self belief =self betterment 😉
@@anotherbrickoutthewall9237 Thanks, worth a try and all looks ace, plus saved £££s
Holy cow your giving me the shivers .I won't be doing none with a grinder .however best I can say is it turned out well in the end
Good bye Volkswagen!!
Crazy....job
lol