Thank you so much for this video! I spent over an hour trying to fix this and had given up and was about to pay $400 for a new one when my wife suggested I find a video on CZcams.
OMG! I spent an hours screwing with this, tried Dyson tech support, and was really frustrated. Found your video and in 3 minutes I am done! If you were local, I would drop off a 6 pack. Thanks!
You are the man! I spent ten minutes trying to puzzle this piece in, spent another five searching and finally found your vide. Done in a minute. This is the best of what CZcams has to offer for fixing something. Whatever it is, someone has been there, done that, and taken the time to make a video of it.
You are great! My Dyson has been down for about 10 months because I could not figure out how to get that stupid part back on. Thank you so much! One of the best vacuums I've ever owned. Still has the suction it had from the dash I bought it.
Great video! Before I turned to CZcams I struggled with that valve pipe for an hour with my wife staring at me the whole time. After your video it took me like three minutes and done. Vacuum and marriage saved. Thanks!
I generally don't make comments, but I have to give five stars to this video and applaud very hard this time. I got stuck with this elbow thingy and struggled for an hour There would be no way for me to figure the proper way to put it back if it were not for this demo! Great job! Thank you so much!
I just want to thank you for your simple and clear tutorial on how to reattach the valve pipe on my Dyson DV17! I tried and tried to do it with no luck...I was trying to attach the seal along with the valve pipe and retention ring and MAN of man that did NOT work. Finally...I found your video....(cue angelic lights and sound)...and it was easy as one, two. three! Yippee! Really do appreciate it! You are a great teacher! :-)
Great video, thank you for posting! I tried for over 30 minutes trying to force that valve back into place, but luckily I found your video and had it back together in 1 minute! Appreciate you taking the the time to break it down!
Thanks a lot for posting this video. I had a DC17 that was sitting in my basement for 5+ years unused and I have to admit I had abused it and used it like a shop vac at time. Anyways, fast forward our other vac broke, decided to fix this one and ended up getting a new motor, brush bar, lower cover plate, and your video was extremely helpful in putting that valve pipe connector back into the machine. Thanks again!
WOW!!! this was an AMAZING!!! tutorial...simple and straight to the point...before I seen your video, i was getting frustrated trying to put that back on...thank you!!!!
Actually to disassemble all that's needed is to reverse the process, however the trick is to use WD-40 as he clearly says on the video. Once I applied WD-40, the valve came right off. Thank you again for your video. Crisis adverted, one more marriage saved !!
I did all that as You-Tube show me . The problem is when i stand up right it look great. It when i turn it on and engage the roller the U Bend Assemble pull away so the dirt goes right back in the floor and I don't know why? I need help. Dyson people were very little help because it a older model. Should I replace the Vale Pipe Assy?
Thank you so much for this video! I spent over an hour trying to fix this and had given up and was about to pay $400 for a new one when my wife suggested I find a video on CZcams.
Dude, you're a life saver. Couldn't figure out how to get the damn thing back on till I saw your video. What a pain in the a## it was. Thanks
Awesome! Saved the day! Spent hours trying to fix this came close to breaking it and he shows you how to fix it within 20 seconds.
OMG! I spent an hours screwing with this, tried Dyson tech support, and was really frustrated. Found your video and in 3 minutes I am done! If you were local, I would drop off a 6 pack. Thanks!
You are the man! I spent ten minutes trying to puzzle this piece in, spent another five searching and finally found your vide. Done in a minute.
This is the best of what CZcams has to offer for fixing something. Whatever it is, someone has been there, done that, and taken the time to make a video of it.
Your welcome. If you ever need any parts, or abetter yet a new vacuum (DC17's are getting quite old) give us an email or call :-)
Thank you for clear instructions for the assembly of this part! All other Dyson videos strangely skip over this.
Made this video because it's tricked me a time or two.
You are great! My Dyson has been down for about 10 months because I could not figure out how to get that stupid part back on. Thank you so much! One of the best vacuums I've ever owned. Still has the suction it had from the dash I bought it.
Great video! Before I turned to CZcams I struggled with that valve pipe for an hour with my wife staring at me the whole time. After your video it took me like three minutes and done. Vacuum and marriage saved. Thanks!
Why is it the wives like to look over the shoulder ? Don't they know we fix it as soon as they walk out of the room ?
Dude, I almost broke my shit out of frustration. Thank god you made this video. Thank you too
Thanks for the video, saved me from punching a hole in the wall
I generally don't make comments, but I have to give five stars to this video and applaud very hard this time. I got stuck with this elbow thingy and struggled for an hour There would be no way for me to figure the proper way to put it back if it were not for this demo! Great job! Thank you so much!
Glad we could help! It's a quick thing we got a lot of calls on so figured why not make a video :-)
I just want to thank you for your simple and clear tutorial on how to reattach the valve pipe on my Dyson DV17! I tried and tried to do it with no luck...I was trying to attach the seal along with the valve pipe and retention ring and MAN of man that did NOT work. Finally...I found your video....(cue angelic lights and sound)...and it was easy as one, two. three! Yippee! Really do appreciate it! You are a great teacher! :-)
+Linda Lou I second what she said! Thank you!
Great video, thank you for posting! I tried for over 30 minutes trying to force that valve back into place, but luckily I found your video and had it back together in 1 minute! Appreciate you taking the the time to break it down!
Thanks a lot for posting this video. I had a DC17 that was sitting in my basement for 5+ years unused and I have to admit I had abused it and used it like a shop vac at time. Anyways, fast forward our other vac broke, decided to fix this one and ended up getting a new motor, brush bar, lower cover plate, and your video was extremely helpful in putting that valve pipe connector back into the machine. Thanks again!
THANK YOU..... Good Lord that thing was driving me nuts.... I watched your video and fixed it in 5 minutes.
Thank you for this video. Saved me a LOT of aggravation !
Glad it helped!
WOW!!! this was an AMAZING!!! tutorial...simple and straight to the point...before I seen your video, i was getting frustrated trying to put that back on...thank you!!!!
Thanks for the step by step, it was a great help.
You're welcome!
oh geez thank you!! I have only spent hours trying to fix this damn vacuum!!!
Hey thanks man! Was working on one of these and your video saved me a lot of frustration
Thanks so much for sharing this....you made this task a breeze:))) First video and directions that worked like a charm! Thanks again:)))
Thanks for posting this! I was getting seriously frustrated! (The DC17 is nowhere near as easy to maintain as the DC14!)
Thank you so much for this video! You just saved my day!
Glad I could help!
I think everyone has said it all!! Thank you!
Thank you! This was very helpful!
This saved me lots of time ty!
Thanks for the help, much appreciated!
Thiiisss!!!! Thank you!!!!
you rock! thank you for your helpful video!
I would have liked to see how take it off in the first place, but thanks for sharing the video.
Actually to disassemble all that's needed is to reverse the process, however the trick is to use WD-40 as he clearly says on the video. Once I applied WD-40, the valve came right off. Thank you again for your video. Crisis adverted, one more marriage saved !!
Thank you, thank you, thank you.
Dude you are the man lol.
Thanks
I did all that as You-Tube show me . The problem is when i stand up right it look great. It when i turn it on and engage the roller the U Bend Assemble pull away so the dirt goes right back in the floor and I don't know why? I need help. Dyson people were very little help because it a older model. Should I replace the Vale Pipe Assy?
Hey Jack give us a call at 330-494-7111, i'd be happy to help you work through it.
How do you take it off !!!!!!!!!!