Tomlov DM602 Digital Microscope Unboxing and Review
Vložit
- čas přidán 14. 05. 2024
- The Tomlov DM602 Digital Microscope has a great big 10" screen and an impressive level of magnification. Join me as I put the DM602 through its paces!
Purchase the Tomlov DM602 Digital Microscope here: amzn.to/3XDDOwx
Unfortunately the discount code was only available until the 5 Feb 2023 (PST).
Looking for something similar but a little cheaper? The Tomlov DM601 has a smaller 7" screen.
Purchase the Tomlov DM601 Digital Microscope here (not tested in this video): amzn.to/3YVmW5h
Do you like my funny t-shirts? I buy all of them from Qwertee. Use the discount code: BranchusCreations to get £1/€1/$1 off your order. Check out the range here:
bit.ly/3OrJZkT
If you enjoy the content and would like to make a small donation, you can do so here:
www.paypal.me/branchus
Tools/Products used (paid links):
T15 Torx (for opening compact Macs): amzn.to/2ZJKWN3
Microscope: amzn.to/2HnSI5H
Microscope camera: amzn.to/2TdSYsZ
Budget alternative microscope: amzn.to/2PmRagt
Soldering station: amzn.to/31QvCMW
Soldering iron tip (T12): amzn.to/2L3Juwt
Budget alternative soldering station (uses T12 tips): amzn.to/2SeUpHg
Hot air rework: amzn.to/2ZjYzPH
Budget alternative hot air rework: amzn.to/3fN1ZU7
Helping hands (third hand): amzn.to/31JUhVL
Ultrasonic cleaner: amzn.to/2ZJKFtB
Ultrasonic cleaning fluid: amzn.to/2YusoQQ
Fume extractor: amzn.to/2HuG0oU
Solder: amzn.to/2ZCUurA
Flux: amzn.to/2Z7XoHQ
Solder wick: amzn.to/2L1Xgjg
UV Solder mask: amzn.to/2ZnK1yu
Precision tweezers: amzn.to/2NqkhPz
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/2xBnTso
28 AWG enamelled magnet wire (thick): amzn.to/32cRsLf
34 AWG enamelled magnet wire (med): amzn.to/35Bx20D
40 AWG enamelled magnet wire (thin): amzn.to/2J2Aisf - Věda a technologie
I am buying the Tomlin DM602 Pro which comes next week., which has the ring light as well as the stem lights, and a transmitter light box for examiing slides. I'm relly excited having watched your video. I will be using mine mainly mainly for looking at pond life and plant samples though. Thanks for a great review!
I was not expecting to see the fancier version of my cheap microscope on your channel.
Bravo! :D
Thanks Bruce for your review! It was very useful to me and I decided to purchase it, it is truly an excellent microscope and I am very satisfied with it !! Thanks again !! 👍👍
I have been using a Tomlov for months doing Macintosh repairs and could not be happier. I did however disassemble mine and made a rig that fixes it to a custom bracket that fits onto a VESA mount attached to a desk mounted monitor arm so the base is not a restriction (just the desk depth) I also tried various other lights but ended up reusing the Tomlov ones as they are very bright and fully adjustable.
We’ll done!
That is definitely something I was thinking about doing as the microscopes that come with a flex arm are ridiculously overpriced imho. So, a $20-$30 solid flexible monitor arm that can be modified to be used with a microscope is the way to go.
@@Turco949 It certainly makes it easier to use and has the same advantage of the flex arm scopes in that you can swing it away so that it takes up no desk space at all. Plus you can increase the height way above the design parameters if needed- I have since replaced my Tomlov scope with an Andonstar as the tomlov kept breaking down and after three replacements they just refunded me :( .
@@XKSteveWhich specific model did you end up getting from Andonstar? My DM501 Pro still hasn’t been shipped yet, and I’ve been offered a refund as they don’t know when supply will be back. Thanks for following up with your experience.
@@Gazmassive I got the Andonstar AD2495-M.comes with three lenses which admittedly have a rather odd fitment method using two screws rather than a more obvious bayonet fitting. one lens is pointless for soldering but the other two are fine. The L lens is great for small IC's/402/805 and 1206 work and the A is perfect for Tants in B or C cases and larger footprint IC like a 68020 or FT232RL. Screen is bright and responds quickly to changes in light. Focus is better on the L but ok on the A especially if you use the vertical adjuster on the side. Happy with mine but like all Chinese electronics the firmware could be better written and some of the mounting solutions are rather ... err... over complicated but as usual I modded mine LOL. I liked my Tomlov but it did have issues with the aforementioned firmware and a rubbish cheapo remote. HTH
Bought one the other day after watching this video, and it’s awesome! All the time I spent doing pcb work using a handheld magnifying glass is just comical now.
Nice lil scope!
THANKS
Sehr Informatives Video und alles sehr gut dokumentiert
I have a similar microscope to this, and I'm in the process of mounting it into the center of an old Luxo magnifying desk arm lamp, with the glass removed. that way there's absolutely no limit on the subject size beside the limits of my desk itself (and all the garbage piled onto it...).
I really appreciated the video, Bruce. Seems almost perfect, with the one big exception that I couldn't use it to solder together an SE Reloaded or SE/30 Reloaded board due to large PCB size. It's really a shame there's no alternative way to mount the LCD so large PCBs can fit nicely under the lens. If it had the ability to accommodate large PCBs, assuming depth perception wasn't such a big loss, it might come close to replacing your large and heavy microscope.
Much bigger screen than mine and I like the light attachment. Mine connects to my computer so that helps.
Would be nice to see how the slides come out, i have the 402 pro and its great for stereoscopic like work but doesn’t replace a compound id like to see what difference the lens make…nice review btw
I was wandering if it has a mounting thread, it would mean that you can take a adjustable boom for better use with larger PCB-s
Thanks for the review. I'm now considering this scope. Can I ask you, did you buy your scope directly from TomLov or did you buy one despatched from China?
Thx for that superb review ! I'm into hobby watchmaking and have to examine 3D objects like little wheels .. so ONE question: Depth of field... Maybe you checked?
Hi Bruce,
What sort of tip are you using to solder the IC with the thin legs?
Hi Bruce. Do really enjoy your videos and really getting into soldering and repairing. Just wondering if you could do a video on soldering temperatures. I often seem to struggle setting the temperature and think I'm going too hot but then colder I don't seem to get the right action.
Kind regards,
Gareth from "Old South Wales".
If you are having problems with solder meting at high temperatures, it might may actually be your tip geometry that is the problem. You want to use the biggest tip that fits with the components you are using. I don't do much small work so I like to use a chisel tip and sometimes a bevel tip. I find the conical tip that comes with most irons to not be not the best in most situations. Heat transfer into the solder is just as important as the temperature. I'm not Bruce and you might already know this, but I hope this may help.
@@nerdherd1796 Thanks a lot!
Wow, fancy, a Kioxia (Toshiba storage) brand micro SD card instead of a no name. Must be a pretty fancy unit 😁
Hi Bruce. I was wondering if you ever use Soldering Past. If not what would be your reasoning.
how sturdy is the stand that comes with it? Does it wobble much while moving pcb or adjusting focal distance??
Hi, im looking for a microscope to look at coins mainly. This one looks good, but there are so many brands it's confusing. Would you recommend this one over Andonstar AD409?
I don't see many reviews of Tomlov, and i read both good and bad about Andonstar.
I can’t seem to solder chips like you did at the 16 min mark. I always end up bridging a bunch of them no matter how many times I go back and forth to distribute it. Is my heat too low or what am I doing wrong? I use a ton of flux
the screen on mine went out after 1 day, so I sent it back... very sad, it was a pretty sweet scope.
HI, were you able to get it to work as a Web cam and also show you the image on the DM602 screen at the same time, It seems to blank out the 602's screen even when using the USB. I know it wont work on the HDMI as you said. Thanks.
How would you say this compares to the Andonstar AD407 if you've had a chance to use it or one by them
Impressive bit of kit! I've been looking for a microscope for a while - the cheapo one i bought a few year back has given up the ghost, and i could do with something that's going to be useful for building up boards - especially the SE/30 Reloaded.
For reference, I checked Amazon UK and the prices for these is off the wall (£386 GBP / $675 AUD) - no clue why, as i checked AliExpress and found them for anywhere between 50 to 80% cheaper, from the Tomlov store, direct! At Amazon prices, you could get a trinocular setup with an HDMI camera! :o
I bought the 602 Pro for getting better pictures to examine certain stamps under long-wave and short wave uv light. My Samsung tablet is somewhat unable to get reasonably accurate pictures under those conditions, compared to plain eye visuals.
I was hoping the Tomlov chip would fare better under long-wave uv (stamps will glow blueish-white) and short-wave uv (stamp would glow greenish-white) light.
Unfortunately, the Tomlov camera chip almost completely fails when it comes to blue light sensitivity.
Stamps that visually glow bright blueish and barely glow blueish do not really show the same marked difference when photographed with the Tomlov chip.
The images under short wave uv light are better, but stll lacking.
So to sum up for philatelists having the same idea: Not recommended.
Thanks for this review.
Would you think that it would be suitable for watch repairs?
I think so!
Thank you very much for such a detailed product review, Awesome!! Keep the wonderful videos coming please. We'd love to feature this video on our social media platform with all of our friends. If it's good with you please reply to give us permission. thanks!!
Please do!
Does this smaller version DM601 have the same image quality? Does it use the same optics and electronics with just a smaller screen? The quality of the screen is the same? Resolution, contrast, colors, sharpness, viewing angles ect.
@@figofagonagoitis DM601 and DM602 the biggest difference is that the screen is not the same, the image quality is the same!
Review starts at 6:00.
I wonder if there's a firmware update to allow the local screen to work while the HMDI out is active?
I just watched this other channel's video on the 7" version, the DM601, and he's able to use both the screen and the HDMI at the same time.
He's running firmware ver AD400.221017.V34-SINGLE7.
czcams.com/video/viC2AzEimCg/video.html
I've seen on Aliexpress they have the camera on on of those extendable/flexible stands that you can then plug into a monitor. $150.
Naturally can't vouch for the quality
AD409 Pro
That's why you'd ought not skimp to have a trinocular mic...