Torque Converter Install on a Massimo MB200S Minibike
Vložit
- čas přidán 13. 07. 2024
- This was a tight fit, but we got it in there. The bike is now faster and more powerful!
PARTS:
Torque Converter
www.amazon.com/Torque-Convert...
Riser Plate
www.ombwarehouse.com/torque-c...
Massimo MB200S Group
/ 6047560285305976
Minibike Newbies Group
/ 5668319929882800
If you like this, please check out my other Minibike Videos:
czcams.com/play/PLi2AZ1lgeRjE0rw80B_1GP0GlH6LGxbbR.html
Wow, your video is the best, most helpfull, no nonsense, to the point production I've seen. Thanks.
Glad it was helpful!
That took a bit of doing but you were more than up to it Lou! GREAT video!
lou ive been waiting for this. i ve my mb200s and my torque converter in the box.
Hey my friend, Dale here. Love the wheelie :) . I did same upgrade, but I used the slanted riser plate. Great vid !
I put the link to the plate in the video description. Thanks for your help with this one!!
Did you have any chain alignment issues?
Great Video I’ve recently bought a torque converter for my ct200u ex 196 and i had to put a 3/4 shaft over my oringnal and it seems to stick out a little would that matter at all
Sweet! Mine comes in Wednesday
Cool! Please join our group and show us your bike!
facebook.com/groups/6047560285305976/?ref=share&mibextid=S66gvF
@@HowToLou already been a member a few days. Matt Jones on there.
Did you install it? Any issues?
Hey got the same bike swapped a predator 212 with torque converter on it made custom riser plate the also moves the motor to the right about 1/2 inch to align the sprockets better and I’m having some issues with the chain hitting the tab welded on the frame for the swing arm do you have an issue like that at all?
I didn’t have that issue, but it is tricky to get it to all work. You can’t lift too much. I lifted 1.25 inches and moved forward about an inch.
I just order the riser mount and torque converter. I hope I don't have chain alignment issues.
Could he have just used the original back plate like he did with the coleman?
Did you have issues with chain alignment?
I had no issues, but Dale Sisson did. Join the MB200S Facebook group linked in the video description and connect with him.
I keep ordering the wrong driver pulley, what’s the correct crankshaft size for the torque converter driver pulley? I been stuck on this project for a while. Also what’s the correct crankshaft bolt size? Me and my dad have the same bike , he’s str8 chaining his and I’m installing a torque converter
If you figured it out and let me know cuz I'm going through the exact same problem now the driver pulley doesn't have anywhere to screw the bolt into on the end and I'm thinking about doing the straight chain on that instead but I don't know if it's going to be as fast. Let me know what worked out for you guys please been dealing with this for months now..
What do you mean? The driver pulley should bolt to the engine shaft right? Is your engine different than his?
What’s the size of the drive shaft? I got a 3/4 torque converter and the sleeve is too big and doesn’t grab
What bike were you trying to put this on?
Can a torque converter be added to the MB100?
I have never done that, but probably yes.
Is that a 3/4 inch shaft? Is the top speed faster after torque converter?
It's a 5/8th Shaft
@@Connors_Engines No it's 3/4". The only 196 with 5/8" (actually 16mm) is the Hisun 196 used on the Coleman bikes. All other 196's are 3/4".
I need someone like this to modify mine I have the same one . I opened the throttle all the way, about to by a stage kit that I need installed, and need to take the speed govener
Look for someone that does lawnmower repair. They can handle this project easily.
I bypassed the govner by putting a vm22 carb on just don't full throttle all the whole time til you remove the internal govner but I got mine to hit 32 I stead of the shitty 25
And that's with out the torque converter
How much are the bikes and modifications? Roughly...
I paid 700 for mini and 60 for TC
Thanks man!!!