I Blow up Mini Gas Engine with Oxygen Acetylene - (Slow Motion)
Vložit
- čas přidán 15. 06. 2024
- I try to Blow this miniature gasoline engine buy running oxygen and acetylene while filming it in Slow Motion, the results were very interesting, to say the least.
I first run is the little miniature gas engine on gasoline the way it was designed, then I run nitromethane which everybody request, and then I run nitromethane and oxygen mix.
I move into hydrogen-oxygen mix and then into oxygen-acetylene which gave it the run of its life.
Mini Engine Used in This Episode:
Extra 10% off code: WARPED
M12 Engine:
Other Stirling engines: www.stirlingkit.com/collectio...
Water to Hydrogen Generator Link: bit.ly/31g9kWb
Glasses I Wear: Blenders Eyewear.
Use my Coupon Code
WARPED16
for 16% off your purchase.
Use this direct link:
bit.ly/31P8Pmb
or the coupon code:
WARPED16
They'll get 16% off
00:00 Intro
00:45 Prepping Engin
01:48 Overview of Engine
03:09 Run On Gasoline
04:42 Run on Nitromethane
06:25 Running Oxygen & Nitromethane
08:51 Running Hydrogen & Oxygen
10:26 Running Oxygen Acetylene
14:03 Extreme Run Oxy & Acetylene
17:53 Outtake
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka - Zábava
The fact that its basically literally repeirable is making this mini engine very respectable.
toyota supra bing bang duur
The fuel was coming out of the vent because the oxy acetylene pressurized the carb and backflowed into the fuel tank.
That part had me mesmerised for a bit, suddenly made me think of 'boost referenced fuel pressure'
Do you use spark plug?
That and dislodging the cylinder liner caused water to go into the crank case.
iamtehstig shhh, let us imagine it heated up like the coolant reservoir and just boiled out
If the oxygen acetylene had pushed out some of the gasoline, filled up the headspace of the tank, and then flashed back into it, it would have made an even worse mess!
9 fingers? Acetylene? Blow it up? Why's this water in here? Flames and destruction! What's not to like? Subscribed.
Water can be cool it !
Water is the by-product of burning hydrogen and oxygen. As soon as he put that in there, I though the J in the exhaust would shut down the engine. It did not occur to me that it would get past the rings and into the "block"
Engine out of China was crap? Who would have thought
boooooooooooooo
Ong
There’s something indescribably beautiful about destructive testing, thanks to the advent of high speed cinematography.
Seeing the exact point and moment of failure is just … so cool.
can we just appreciate the fact that this guy used a proper high speed camera instead of laggy 3fps footage from a webcam like many other do
For real, the dedication to his content is never half assed
you mean the thing that all smartphones do already?
@@Blox117 none of them do
@@josef2102 my galaxy s8 does true 240fps and many phones do 960fps these days at 720p and even 1080p
@@Blox117 I know but that's not really super fast. 960fps is a lot but it's not that slow in slow motion
Didnt even realize he was missing a finger until halfway through the vid...
Yeah me too
Has he previously mentioned how it happened?
@@RICHOCHANGO Prob same thing that happened to me... back in '99 I was jackin' it and I fell off the couch. Came right off it was horrible.
Haha didn’t notice it either till about half way through.. probably lost it from shenanigans like this! Lol doesn’t seem to slow him down much!
@@RICHOCHANGO lost it in his childhood due to a machinery accident i think
14:55 - I'm guessing it was putting out about 10hp for the 1-2 seconds it held up. That was awesome, made me almost spit out my beer lol
Haha same dude
It was also running on anti-lag with no turbo
Mmmmm beer
That's more power than most motorbikes I've seen
*when it backfires out the intake*
Me when taco bell
Scooby when he eats anything that has 5 skull red hot sauce on it
We need Garage54 to put an engine like this in a Lada.
Lol... It would probably work
Garage54 would solder 30 of them and make an inline-30 Lada
@@LudovicoOperti speed will be like 0,1km/h :-D
@@LudovicoOperti or one engine and a special chain drive/gearbox to slow it down and multiply the force.
There's a channel called LifeOD that welded a lawnmower engine to their Honda
"I wonder how he ended up missing a finger" 5 minutes later: "oh"
I had this exact same thought lol
I hadn't noticed the losing finger till a closeup, but I awared something then turn into haha rather than surprise 😂
Me too?
I was like "huh, why this guy missing a finger" and "now I know why" scroll through the comments and see I wasnt the only one
When?
Tough little thing, it’s impressive how it kept running despite cooking the fuel tank.
Fr, at that point it was literally destroying itself, but still kept running
When you burn this it’s byproduct is just water
Uses it in the motor then scratches head as to where the water come from 🤣
How did he not see the water damage coming? TBH, I thought the exhaust, given its shape would fill with water and stall the engine, not that it would end up in the bottom end. Still, EVERYONE knows who is even remotely familiar with oxy-hydrogen that the byproduct is water. He simply should not have been surprised having built an oxy-hyrdrogen generator himself.
@@tarstarkusz he really should have just run it on hydrogen, I'm surprised the generator doesn't separate hydrogen and oxygen, it's pretty simple to do, you just need seperate chambers on the cathode and anode.
@@nosch43 It wouldn't work. If you pumped hydrogen into the cylinder, there would be no oxygen to react with.
@@tarstarkusz air has enough oxygen to allow for hydrogen to burn. that's why blimps that float with hydrogen can explode. there still would be water released but not as much, however he would use much more hydrogen as it likely wouldn't fully combust. fill a balloon with pure hydrogen and light a match next to it it'll give you a fireball.
@@nosch43 But how is air going to get in if you have a "pipe" shoved against the throat of the carb breathing in pure hydrogen? (check out 0:03 in the video). You can see the pipe shoved down the top of the carb and sealing against the sides.
I agree there is plenty of oxygen in the atmosphere to allow burning of hydrogen in the open air. But to run an engine on hydrogen requires a connector directly to the carb and in this case he just used the top of the carb which would block any air and there is no other path for the air to get into the engine other than from the top of the carb.
If you filled a balloon with hydrogen and put an electric igniter in the balloon and then tied the balloon with the wire going inside it so there was nothing but hydrogen in that balloon, it is not going to explode. If oxygen gets in it while you are filling it, that oxygen will combine with enough of the hydrogen to bust the balloon and expose the remaining hydrogen to atmospheric oxygen and the rest will burn.
"the only by product if burning hydrogen is water" "huh why is there water in here"... Oh my friend. I love your channel heh
Thank you at least someone put two and two together!
the blow by is real
He mentioned it could be hydrogen
Lol, exactly my thoughts
was going to make the same comment lol
-This engine is such a beautiful, handcrafted precision piece of machinery...
- .... straight from China !! 😂 😂 😂 😂
LMAO! A well said oxymoron!
And what a price tag too, worthy of such precision and quality.?.
ChinA
China can make nice things.
@@lawnmowerdude hahahaha thats hilarious
The fuel was pushed out of the tank by the oxi-fuel gasses flowing backwards from the carburetor through the jet.
I was looking for this comment.
bingo
So wait... you are telling me that when this ID10T said he was running on HHO, there was still fuel in the tank? lucky he set the oxy acetylene mix sooo lean (i call that flame colour screeching blue, for obvious reasons) else the engine would have cut out after briefly running so rich the soot in the exhaust would have made it look like he was rolling coal!
I was about to type that 😂
@@daftflamious that flame is a neutral flame and is a pretty much perfect stoichiometric ratio
15:03
*my final brain cell on the last math question:
Falcon Heavy profile picture
>putting extreme fuel into brain
>brain still refuses to think
one day i'm going to buy a tiny engine like this.
Yeah me too, but I want to buy the kit version, like the one he built a few videos ago
Me too
W16 , quad turbo , 16.00 horsepower
@Wladpad Custom RV Cars
Yeah there cool
The water in the crankcase is from when the cylinder sleeve pushed out due to the stuck piston. The block is hollow around the sleeve to allow the water to get right up against it. As a result the sleeve is what seals the water from getting into the crankcase. Most larger engines have an o-ring around the base of the sleeve though this is so small it may just be a tight fit with no o-ring
Or it overflowed and ran down the back of the engine and into the fill hole.
That's what I thought at first but I didn't see any sort of hole in the block the block was literally just solid brass and that little water tank was soldered right to the top. I'm going to check again but I'm pretty positive there was no coolant passages. I do however like your idea as a cooling design, that would be similar to like an open deck Engine with coolant passages around the cylinders.
Warped Perception the nitro likes to turn into water too especially in the crank case
Exactly, it was from the cooling water. It definitely wasn't from the hydrogen and oxygen.
By product of hydrogen is water... right? Then that o-ring for a piston ring let the water pass. Especially under those extreme circumstances.
I love how the subtitles just say [music] while the engine is running.
that fire coming from the big tank thing is like a sniper...
the last burning scene was beautiful
agreed
Absolutely
More like the music to it
Yes! The music and explosions - bad to the bone!!
When Acetylen burns it also produces as biproduct water.
Im putting pressurized gas into the carb and back feeding the fuel line, IDK why its venting out the gas tank.............drrrrrrrrrrrrr
Another idiot that missed the entire point !
"where did all that water come from" you literally said it, the byproduct of burning the hydrogen and oxygen is water, with the exhaust angled up and cant escape and will go into any empty space.
15:25 reminds me of Scotty telling the captain he's giving the engines all he's got
Women: he's probably thinking about other womem.
Men: oooh cool a small engine. Let's give it nos.
So true. I'll put NOS on a kick scooter to help me brake
1st thing real men think of when they see anything with wheels. Lol NOS!
NOS is a brand name not a substance and this video didn't even have anything about nitrous oxide in it...
@@Krankie_V Stop being such a whiny know-it-all. This isnt talking about the video, this is talking about what men love to do: build awesome shit.
And NOS may be a brand name, but is often used for Nitrous oxide systems for engines. Same as "Googleing" being used as a word for searching stuff on the interwebs.
im not that familiar with this stuff, but isnt nos nitrous oxide? did he use that at some point in the video?
"Just gonna jam it in there this time" top ten quotes that I love
LMAO !!!
Lol nice icon bto
Nice icon
Nice icon
not like he could count all those quotes with his hands
this engine has a pretty violent cam and it tends to have a lot of valve float when you run it at high rpm that's why the cam was wearing out so fast
Nobody:
Kids with their Honda's at 3AM: 18:00
This engine at the end was the equivalent of a person on fire running through town screaming, shitting, and puking at the same time!!!
Dude you made my nostrils hurt. Lmao. Great metaphor. You need to be farer up
Lol
That fancy poetry is spot on.
The cylinder sleeve moved. The water ran into the crankcase because when the sleeve moved it opened the water jacket.
Nah putting in hydrogen generated the water blown past the piston rubber ring
@@LawpickingLocksmith the oil wasn't milky. The water was introduced after the motor stopped running
@@buildingracingvideos4714 I'm going to check this engine tomorrow but there was no oil left to mix with the water it was all blown out of the crankcase when I first started it.
That's what I thought at first but I did not see any water passages in that block. It is literally just a solid block of brass with a sleeve. The tank just sits right on top and is soldered to the side of the block. I'm going to double-check tomorrow and take a look inside, as much as I like the cooling passages idea because that would be a really cool design similar to an open deck block, but I don't think this one has water cooling jackets around the cylinder, I'm going to double-check
@@WarpedPerception idk that is a very tiny motor and ideally hydrogen likes AFR's in the neighborhood of 30:1 I think stoichiometric is like 34:1. I don't know how long you ran the motor but given the cylinder volume you couldn't possibly have burned much hydrogen at all. Then factor in that, that wasn't the total water produced that was just blow by.. I could be wrong, for all I know you could have ran that motor for hours. It just seems, given the capacity of the motor, that even a 10:1 ratio is fuck all hydrogen being burned. I would expect that much water coming out the exhaust but not as blow by.
Awesome man! Love your job.
This was definitely cool to watch. I wish that i had learned more about engineering and mechanics growing up. This would be a hobby that i would like.
not too late to learn my friend!
@@olibaker4899 maybe one day. I would need the equipment to be able to build and modify these engines, but I would love to learn if I had the time and financing to do so.
Engine: plz kill me
WP: MOAR POWAH BABEH
Gas Tank + Valves: Aight, guess we're exhaust pipes now as well
Alex Kibis aye mo powah baby, donut media yeah?
Love Your video’s but the question is ... where is the 2stroke??? Anyway keep making this video’s 👌🏻
It's coming, unfortunately the factory where I'm going to manufacture the components has been closed because of the coronavirus since February. They are still closed to outside hopefully for only another couple weeks. That's literally all I've been waiting for I am so ready to do those
Thank you..
Context? What 2 stroke?
He should have removed the flywheel in the last experiment to see how much RPM that sucker could handle before self destruction
What 2stroke?
Brilliantly crazy..... Love it..
. Keep em coming
I have seen a few of your Projects and they are so impressive, informative and I learned already a lot from your great Work! So thank you very much for sharing your Skills and knowledge and keep on Rockin!
14:53 This is what happens when I eat Taco Bell.
😐
but it’s such a cute little engine 🥺
looks like someone put their heart into it
Yeah I'm unsubscribing
@@jacklapolla1802 This guy's an idiot.
@MichaelcohenLyingPOS Maybe that'll wipe the stupid smirk off...
@greg mccarter Who never built a thing in his life.
Its fine its machined and basically assembled dont worry it aint gonna be a big deal
Min 15, pure art!! Beauty!!
I appreciate you taking the time to add the explosion sound effects in the slo-mo edit. it makes it that much better.
14:50 Anti-lag on a model engine at its finest
I've seen Stirling engines drive generators and people use them to charge their phones. I'd like to see something like that for this engine :)
Add it to an eBike to make a hybrid!
grumpus27 lol
yeah, when I saw what he was doing to this nice little motor, couldn't watch it. thank God for sponsors, right?
“Why is there water in the crankcase?” The byproduct of burning hydrogen is water
I love how the pressure from the torch going through the carb made the gas tank spew fuel out the breather cap, fueling the fire :D
The engine every time he cranked it up: “Awe shit here we go again “
Those things just need a couple of drops of oil.
Well it definitely got more than that...lol
@@WarpedPerception do paint drumming in as low as 300fps ( lowest frame rate in the channel, 1st take) and the normal 1300fps (2nd take) slow motion with the same music played on the outtake of the engine. drumming with paint would be cool in slow mo!
The more the merrier!!!
Makes sense, that a non-hydrogen engine is full of water when running hydrogen, I mean it has to go somewhere.
Why do people assume its solely because of hydrogen? Water is a byproduct of all combustion?! Its a byproduct of fire.
@@Bruce1Parsons Yes, that's at least true for hydrocarbon fuel, you can watch that process easily by lightning a match.
At least in the match cass it evaporates very fast.
Your videos are awesome, love the slow motion part
During the slow-mo of the destruction of the engine it somehow seemed so determined to finish the job, even though it was surrounded by fire, the exhaust was catching on fire as it came out, you could almost make a movie using this as a format for a catastrophic engine failure.
Been following you for a long time, I gotta say the soundfx on this video was phenomenal. Obviously those slomos don’t sound like that and you do a great job making it seem realistic!
i thought it was real.........
It's so interesting the way it worked until it got blown. Love your videos because I can learn more about the processes that happen into an internal combustion, so I can use them in my classes to teach my students.
The flames shooting from that muffler was too good , loved the slowmo
"It seems to work if you pull it out and you put it back in"
Noted.
Must try that next time. XP
Burns hydrogen and oxygen
:where did all this water come from
Just say wow! Tks mate
I just love watching stuff blow up as much as I love fixing it your grand LOL
first start after rebuilt already sounds better than the whole part before XD
When he gives you the finger, he really means it.
Especially nice how the whole thing's engulfed in fire at the end! Excellent!
Great video dawg I loved the scene thing after the engine blew up
You really need to have a "hang out with a fan" contest. I'd happily drive up to Chicago to be part of it!
Closing the needle valve, would have prevented pressure into the fuel tank
Keep doing the small engines cuz that was the coolest thing IV seen on CZcams cuz you'd never think that something like this would be on CZcams
Keep up the good work Brody
This was awesome! Great slow-mo during the blow-up. I'm curious about the water in the crankshaft as well - that looked like an HHO generator that was doing the electrolysis to generate your Hydro-Oxy mix, it makes sense that it burns back into water, and I know these are designed to be added to gasoline engines to "improve efficiency" with maybe dubious credibility if that actually works, I'm curious if you've done more with the HHO generator, and if you found any fuel efficiency increases from running it in a gasoline engine. Thanks for making cool videos.
-Water is H2O
-Adds Hydrogen (H) first, then adds Oxygen (O2)
-“Why is there this watery substance in the crankcase?”
When u burn hydrogen in presence of oxygen they react to become H2O...in the form of residue
...Its in the crankcase... How should it get there? That's what he ment.
Simon T Ah I understand now
Shrikrishna naik Gotcha. Shows how rusty my Chemistry is.
Isn’t the lever opposite the mixture adjustment the throttle? Didn’t see him use it.
Think thats the choke not sure.
It's the throttle but I just left it wide open throttle the whole time
@@WarpedPerception why was it running so slowly on petrol when it was wot then? is the engine just that crappy
vx-iidu 9000 I think so, it’s just a toy really. It produces barely enough power to run itself. It can’t really supply any useful power.
@@vx-iidu its supposed to run slowly the real engine that it is baced of of probably never went above 100 rpm
I loved the sound effects. Also the acetylene flames are quite beautiful.
?
I just bought one of these little beauties and I'm so excited about starting it up that I think I might wee! My house mates are going to love the noise!
That slowmo was awesome!
I love how the valve's leaked so bad that it turned the leak into a mini oxy/acetylene torch and melted the springs lmao
EDIT: Also the torch looks like some weird rocket taking off from a launch tube at 19:14 😂
Crackling sounds is just amazing
Loved this video!
1:41 what the 😂
Fucking
finally someone points it out.
“ if I learned anything from my buddy at whistlin Diesel...” 😂😂😂😂😂 yeaaah buddy
One of the best things I have ever seen. It makes me want to put some torch tanks in my truck and just run the lines to the intake.
Fun and absolutely beautiful! Thanks...
"I figured that blowing it up would be a perfect introduction to it's existance" - I couldn't resist laughing :D
This kind of playing around could cost a man a finger.
anyone know how he lost it
Another*
oh now I can't unsee it...
14:53 Man! that adds a whole new meaning to forced induction 😂
What a spectacular fire ball!!!! That was satisfying.
I feel pain,when he killing this small engine, he's was so cute engine...:'(
Виталий Серов new valve spring and maybe some seals and it’s good to go I’d bet, the valves go straight to the piston so it is unlikely to have damaged either of them unlike with angled valves
I think I cried a little bit.
It didn't throw the rod? Just the intake valve spring melted? I waiting for you to put a bit of resistance on the flywheel to see if it smooths out any (on gasoline). 2 stroke rs play that game. Unloaded, most sound like a hit n miss, load it and they hit every time. ie: Chainsaw.
Work of art
I died laughing when he dropped the juice in it and it sounded like a AR 15 going off
minute?
16:42
The gas was shooting out of that tank, due to the fact that you were forcing high pressure into the carb, and therefore it traveled into the tank via. the fuel line, and pressurized the tank's interior.
@The Shapeshifters Misale i do
Awesome🔥 I like this video so cool well done bro
That slow mo engine scene the sound of the boom seeing everything explode and catch fire😍
Oh yes! Such a beautiful thing!💖💥😍😂
14:54 Mini engine gets bang pop tune
Nobody:
Yt subtitles: [music]
are they wrong tho?
@@MatyThePotato I don’t even remember commenting this lol
@@MatyThePotato nope
already pretty impressive for a small engine
i love the little backfires 💖👌👌
"I love chaotic stuff"
looks at the fucked up hand with bent and missing fingers
"I'm gonna stand over behind this blast shield you do your thing"
Me: Likes the engine and wants to buy one
Link that he gave: 300$
Me: Try's to find glasses to make sure I'm reading it right
All the kits are fairly expensive but you can find some cheaper ones. Tons of company's sell sterling engines!
In the end it’s a good deal given the fact that the engine was made by people. And it took a lot of time to make.
we need more of this!!!!
Love your enthusiasm for chaos.
Woulda been cool if he would have opened up the throttle...
Pete Mason static engine lmao no, go learn what static is, and it has a carb with a throttle.
@Pete Mason Then what do you call the lever on the opposite side of the mixture screw?
It did have a carburetor but I had the throttle wide open the entire time.
@Pete Mason 😂🤣
Lol. Water!!??
11:02 the dog was like yup, I'm outta here!!
looked amazing
oxygen FTW!!! that was amazing.
11:56 When you burn hydrogen inside an oxygen atmosphere you get H2O, water. That's why it produced all of that.
Nope, far too much water in the crankcase to be exhaust gases. It was leakage from the water tank somehow.