Video není dostupné.
Omlouváme se.
1970 9.5 JOHNSON BULLET PROOF
Vložit
- čas přidán 15. 08. 2024
- ''BULLETPROOF'' 1970 JOHNSON 9.5. ALL SYSTEMS GO!
GIVE IT THE ''ONCE OVER'' AND TEST RUN. RUNS GREAT!
9.5 SERIES
THIS OLD OUTBOARD
RESURRECTING SMALL OUTBOARD MOTORS
Music JR Tundra Moonshine Town
WOW! ALL SYSTEMS GO! This old vid of mine popped up so I had to play it. Sure brings back some good memories. Although it was uploaded just 5 years ago, the actual video and pictures are from many more years ago. Glad I still had them!
Nice!!! I thought mine was slow for hitting 17mph on a loaded 14ft with casting deck 35lb trolling motor and massive deap cycle so you just saved me some money thanks alot!
👌 thanks for watching and commenting . Stay tuned !
I told my self I was not going to get anymore old outboards to tinker with,but you got me hooked..Picked up this same year motor for$50 the other day.Ordered the same switch and a new impeller..Got it running for a few seconds after some points adjustment.Waiting on the parts for another test to see how it really runs.
Hahahahaaa. Its bulletproof ! Thanks
I have the same one it’s 1968 and it’s been in the family since new . Still running pretty good for it’s age
Hey. Thanks for watching and commenting. Sweet! That's cool. Thanks again & Stay tuned !
I've had a 72, 9.5 for 35 years and it's gone places.
Even did 15 KLM of open ocean to an island on a 3.5m.
I've brought another as
Can't get crank bearings for them anymore. I wore it out.
Hope the new one goes as good but needs work.
I've got a 25 Evinrude on the boat now but the little Johnson has its uses.
Hey MM. Thanks for watching and commenting. Looks like marineegine.com has them in stock but they're not cheap! Check ebay, probably find a better deal on some used ones and even new ones. That's where I buy all my parts. Thanks again & Stay tuned !
@@THISOLDOUTBOARD1 Thanks mate yeah I tried my local boat shop and Crowley Marine but will obviously need to look further!
Appreciate your video's they are good for motivation to rescue a few of these old motors👍
this was my first amore !!!(!when i was child) in italy we call it" tartaruga"(turtle)
i think its real cool how the tiller handle folds,,, the gear shift is up front and makes for safe transport the idle control on the tiller ,,and its pumpkin shape,,, all to please the fishing community ,i am 70 and its not as heavy as others i think any one know the wieght of a 9.5?,i have yet to even start it. got to love winter in ontario for deals 1967 $200 cdn..tons of compression and all nicley oild and greased for winter storage ,,my 10ft rib dingy is gonna fly lol love your vids bro ,i am a 70 yr old green as grass newbie,,better late than never to become a johnson fan ..i have also recently got a 1958 10hp its gotta be the nicest retro design ,then i got a 6hp sea horse off a hunting buddy ,,i am all set to learn ,and your site gives me this advantage thank you
Hey. Thanks so much. I'm right behind you at 61 and wish I got into these things 25 years ago, like you say, better late than never ! If there's anything you ever need to discuss dont hesitate to ask. I'll do my best. Thx again, Stay Tuned !
I have a Johnson 1965 9.5hp (model MQ11C), and it weighs 26.87kg / 59.24lb. I also have an Evinrude 1973 9.5hp (model 9322B), and it weighs 27.93kg / 61.58lb.
Oh yeah love the video s
Thanks !
I love your show
THANKS!
i just got a ultra clean 9.5 1973 the guy i got it from says it was the aniversary model lol new one on me ,,the motor is spotless apart from a scratched cowel .gonna check it out tommorow ,get er running i hope ..i may need your knowledge lol
Hey Pete. Thanks. Sounds good ! Its been awhile but if I can halp I will. Check out leeroysramblings.com for everything 9.5. Thats how I learned them ! Lots of good stuff there. And boatinfo.no for the manual. Let me know how it goes and put some vids up ! Thanks again !
I run this on a 81 F7.. Hit big water on nice days to put around a mile or two out and then go pond hop....Its got enough power to putt around on big water but if it gets rough you better start heading back cause its gonna take a while. Very nice engine though, starts right up 1 or 2 pulls and easy to pull over compared to my Jonny true 10.
Hey. Sounds good. Thanks for watching and commenting . Stay tuned !
I’ve got an ole 65 Johnson 40 hp that I’ve turned into a tiller handle it runs like a champ but will not idle. And if I run slow she’ll bog when i take off. Shed some light this motor is only 30 years older than me 🤣🤣
Hey. I would start at the carb/fuel system, clean/rebuild, check your tank/hose, is the vent open, look for air leaks at the hose connections, is the float/needle closing when you pump the primer bulb, check the choke, is it working properly, will it idle with the choke closed, is the slow speed needle responding when you turn it, sounds like it may be clogged/sucking air, check the roller cam, is it opening the carb butterfly, ''link and sink'', replace old fuel lines, check the fuel pump.... I had a 25 horse johnson , 90's model with the newer style carb like the 1990 johnson 30hp that I have now, it would only idle if I put two fingers over the carb acting like a choke. I would swear up and down that the carb was clean and ok, especially after i cleaned it 3-4 times, well, after checking everything again and again I put an old 70's carb on it and it idled/ran perfect! I was blown away, couldn't believe that the carb was clogged, I was convinced it had to be something else. The moral of the story is, don't assume anything with these motors. Hang in there and let me know how it goes. thx
THIS OLD OUTBOARD thanks will do this weekend
She's a runner!
I wish mine would wind out like that!
Hey. thanks for watching and commenting. Really appreciate it. Check out my other Outboards too !
I would love to hang out one day and talk shop and see your stash of outboards bunk auto n small eng
Joey bunker saline Louisiana
Hey. Yeah. The only stash of outboards I have is all on my videos. I flipped them all. Currently I have my 92 Johnson 60hp on the boat and the 79 55hp Evinrude I'm rebuilding. Check it out. Thanks again !
Nice job! Can you tell me what kill switch part was used? I need one for my 1973 Johnson 9.5
Hey. Thanks for tuning in. Go to marineengine.com, look up your year/model. You'll find the part number there. And/or you can get a similar switch at any auto parts store, 20 amp with the rubber covered push button. They're probably about 13-$15 now. Thanks again & Stay Tuned!
I have a '69 and it's showing its wear & tear in many ways. Did that kill switch come from NAPA?
Hey. Thanks for tuning in. Probably not napa but it more then likely came from an auto parts store. Thanks again & Stay tuned !
Love your videos! You do a lot of great repairs.
I would really like to have one of these old outboards
Hey. Thanks for watching and commenting. Stay tuned !
@@THISOLDOUTBOARD1 what motors do you have for sale right now
@@dwaynequinn9382 Im thinking about selling my 83 25hp evinrude. Its super fast, I put a 35hp carb on it. compression is 135 even, electric start, short shaft. It rips. 30mph on my 15 ft Dura Craft. check it out
@@THISOLDOUTBOARD1 where can I check out at is there a video I can access
@@dwaynequinn9382 Yes tons of videos. I'm at Lake Fairview RV park. Are you local.
Do you thinks it would be a good idea to rebuild the lower end before putting the power head back on the Big Twin. Maybe it would be easier to get things back together??? Thanks -Ed
Thanks for tuning in! Just catching up!
Holy smokes! Is that top speed and responsiveness what you would say average for a dialed in 9.5?
Hey. you just saw it. For a dialed in 9.5 on a loaded 15 ft. Dura Craft jon boat, 17mph would be the average top speed. The Dura Craft is a heavy boat, we did a test run on a friend's 9.5 and it was hitting 19 mph, but, the boat had no gear in it. Plus, the GPS apps aren't always accurate, you could be running 19.9999 mph but it's only going to show 19. I just tested three different apps and they were all different readings, two of them were pretty close to each other but the third one was off the charts. To get a true average you would have to get about ten 9.5's, all with the same compression, all tuned and dialed in and all run on the same boat
opps, I hit the reply button by mistake, anyway you get the idea. I have had five of these old outboards, three of them are posted on my channel, and they all ran about the same on my boat. Thanks for watching and commenting. Stay tuned !
@@THISOLDOUTBOARD1 makes me excited for my 73 evinrude 9.5. I literally just did everything you did on this video, waiting on my j4c's to show up before i put it on my 11' fiberglass boat. Thanks for replying, and giving me a bit more incentive to learn about my outboards.
Hey. kool man. one thing about those motors, there is a doughnut type rubber gasket in the mid section that keeps the exhaust fumes from coming in around the power head. when you get it on the boat and it runs fine with the hood on, your ok, but if it runs like crap with the hood on but runs fine with the hood off then you know its that gasket. The exhaust fumes are choking it out, no fresh air! You have to take the whole thing apart to replace the gasket, basically the mid section sides have to be removed. Fun Fun Fun. Hope yours will be ok! let me know how it runs or post some vids. Thanks again . Stay tuned !
@@THISOLDOUTBOARD1 instead of changing the exhaust gasket ,being a dirty job ,how about putting an air scoop or louvers to induct clean air into the cowel ,,would look cool to lol
Is it for sale ? She is just what I'm looking for. I have the same engine but it's a 6hp.
Hey Tim. Sold it a long time ago. Thanks for tuning in!
Ok I have evinrude 9.5 seems like same engine,compression 80psi sparks are good I did clean the carburettor and i did started it does stars when I push the choke cuts of ? And doesn’t stars again? i realy need a help someone like you
Hey. Pull the fuel line off the carburetor pump up the primer bulb from the gas tank and see if the gas is getting through. Then pull the pull start a few times to see if the pump is shooting the gas out through the line. If you have a big drill with a socket you can turn it that way instead of pulling on it. It may be a week or bad fuel pump. It's a process of elimination. If the fuel pump is pumping and it's running with the choke on then you're slow speed circuit is either clogged or not adjusted properly. You may have to clean the carburetor again. Also try starting it up with the choke on then rev it up as high as you can a few times. Sometimes that will clear the slow speed idle and pull any clogs through. Let me know how it goes. Thanks for watching!
THIS OLD OUTBOARD hello again I did everything you say and engine did start but look like I am having timing issues I did take the flywheel out And I make a very short video for you on this video coils does not look nice also I do not know how to make a timing please watch my short video to see coils thanks. czcams.com/video/R4Hvre7J-EQ/video.html
@@bahadirdogan6208 Yep time for a Super Tune-up. You can find a manual here, boatinfo.no and lots of good stuff here, leeroysramblings.com.
Hey! I found one of these motors near me for 100$ , the guy says its not siezed but he doesnt know if it works. There are pics up on the ad , do you think i should buy it?
Thanks
Thats up to you and if your up for the challenge. Heres some good stuff at leeroysramblings.com. good luck !
Check the compression first... If it's not seized up, that is... Pass it up if it is or doesn't have the proper compression. It will likely then be way too much money to get it running. Though sometimes a seized up engine can be easily fixed... But then you will have to buy it to check out the compression.
Hello, I just found a guy selling a 1965 Johnson 9.5 and a 1972 Evenrude 9.5 for $250.00 FOR BOTH! He said hes had the 1972 Evenrude running on his boat. And THINKS the 1965 has good comprehension but cant give me any numbers. I haven't seen the motors in person yet, just pictures. Any idea if this would be a good deal? I figured if there's a problem with the 1972, I'd use the 1965 for parts. If they both run, I'd resell the 1965. Any thoughts would be appreciated. BTW, I know NOTHING about fixing outboards other than the research I've done so far. Thanks
Well I think if you feel like taking on the challenge then pull the trigger. Get a compression tester and test them, check the oil in the gearcase too. $250 usually means 2-225. Some people would not recommend this outboard as a "starter motor" if you have no experience with outboards. I didnt have any experience either when I started and I had a few of them. Check out leeroysramblings.com for everything you ever need to know about the 9.5's. That's where I learned about them and more. Good luck!
@@THISOLDOUTBOARD1 I've been reading up on that web page. Lots of good info. Im never afraid to jump in head first and beside, I figure I can always pay someone to fix it if I cant. Provided I can can afford the repair bill..lol. I think I can get them for under $200.
Nice video ordered me a new camera hope to be getting some new videos up when it arrives what editing software do you use?
hey. i hope you can tell the difference in this old video compared to the first ones i was putting up. i did my homework and i finally figured out how to keep the quality even though i dont have the originals anymore. and after doing even more homework i figured out yesterday what was going on with my new videos too. i'm using windows movie maker, its not as good as the older version but its really simple to use. i tried some of the new popular video editing software and they're just to complicated, so to say, and get a little pricey for what i am doing. WMM was leaving my new vids a little lifeless after processing the video for uploading. there is no way to adjust color/contrast with it, it does do brightness +- though. so, after uploading numerous short clips to youtube and experimenting with WMM I found out that i can enhance the new 1080p vids using my NVIDIA GRAPHICS CARD software during editing and processing. you should see a difference in ( this video ) and the next HD vid i upload.
THIS OLD OUTBOARD Yes looked good thanks for the info.
what cam did u get
THIS OLD OUTBOARD I bought the Crosstour its a GoPro knockoff but it has great reviews on Amazon and price was right we will see. Have a trip to Venice Louisiana coming up hoping to get some good footage fishing with it. I will post when I get back.
cool man. tell TROY and the swamp people crew I said Hey!
Thats a strong running 9.5 did you drill out the high speed jet bend the tabs more open on the reed plates,Im just kidding of course nice motor???????
Hahaha Scared me for a minute there. Thanks for watching and commenting. Stay Tuned !
Will any other fuel pump fit these engines? The square one is 120.00.
hey. know its not! www.ebay.com/sch/sis.html?_nkw=Fuel+Pump+w%2F+Gasket+For+Johnson+Evinrude+18-7350+6hp+8hp+9.9hp+15hp+Engine+Motor&_id=222621608273&&_trksid=p2057872.m2749.l2658 . you just have to ''reconfigure it''. they just want to sell u one all ready ''configured'' but once you ''switch'' it around your all set. I'll try and find the right configuration but mean while do your home work ! all the info is out there on the innerweb for the correct config! save your cash! the last one i bought was like 15.00 bucks . I think it was for the Johnson 18HP. Check out those vids, ''what it takes series''. I'll get back with u. or u get back with me! thx
Thank you for your reply. Reconfigure as in running the Gas lines??
hey. kinda sorta. the pump has to run a certain way so it pumps and pushes the fuel in the correct direction. its a pain in the butt, but, once you figure it out its like butter! I only come across this problem every few years or so, so I have to go back to my manual and double check it and I didn't do it the last time on the 18 horse and I forgot to move the spring over and had to redo it. No biggie. TMI to put in this reply! Hahaha Not a big deal once you figure it out. And you'll save yourself $100. Anyway like I said, do your homework ! it has to be on here somewhere. if not we'll figure a way to get it to u. thx again
hey. heres a link for the rebuild kit if you have the old pump www.marineengine.com/newparts/part_details.php?pnum=OMC0388833
I NEVER LIKED THE LOW PROFILE OF THOSE TO ME THEY LOOKED LIKE SOMEONE STEPPED ON IT GETTING INTO THE BOAT! THAT IS TILL I GOT ONE. IT MADE MY 14FT ORLANDO CLIPPER JOHN BOAT SLIDE ACROSS. THE WATER NEVER MISSED A BEAT. THEN SOMEONE STOLE IT. YOU CAN'T HAVE ANYTHING.
Yeah nicknamed the turtle, designed for the fishermen with the low profile.
They designed it that way for fishing...you can swing a rod or line over the top , plus it trolls better than a 9.9 due to the beefier and thicker connecting rods (heavier rotating mass)
Can anyone tell me, does a 9.5 use the same fuel pump as the 9.9?
Heres what your looking for www.leeroysramblings.com/OMC_9.5.htm you can get the pump on ebay pretty cheap . www.marineengine.com/ check here for parts
Thanks. That’s the answer I was hoping for.
Marinengine, $138.75
eBay. $12.00
@@artengland8010 Your Welcome
You can also find some bargain priced parts on Amazon. Check Marine Engine site for good off brands vs. the OEM parts. The off brands they recommend are usually as good if not better than the OEM. Then shop Amazon and Ebay for those.