I used to run a husky 455, great saw! Loved that thing! I was a stihl guy as well, until I bought the husky. 👍🏻 I demo’d the new 500 series but went with the carbureted 455 because of the lower cost and it felt that there was more lower end power. I also liked not having to deal with the fuel injection issues in the mountains. Also, I ended up with a PS after 3 Cummins trucks, thanks to you. Love my PS! 👍🏻
Love the video with the chain saw action, I have three Stihl, one Husky and a Dewalt 40 volt battery powered that is really handy for small stuff. Stay safe....
Use the Off road screen on your display and it will give the grade percentage. gives people better understanding on how steep it actually is cause videos don’t do justice. Awsome video keep it up
Hey great video. Noticed you have BakFlip on your truck when you where getting the chain saw. I have a 2019 F350 and would like to get the BakFlip but I have a fifth wheel hitch in the bed. Would you mind measuring how far the BakFlip actually sits under the top of the bed rail, so I can see if my hitch would interfere. Thanks I appreciate it. Keep up the great video’s
Tell us more about you data monster. I just ordered one but they DON'T make tunes for my truck....2012 ram 6.7. Have you heard of other makes or years that go together? It looks cold there. It snowed a bit here in Arizona today. Nothing stuck. Thank you and God bless!
Ok I have to ask now that you've had the Falkens on for a while. Better buy then the Generals on the 2019. Mainly interested in wear and snow performance. Maybe do a video comparison on the two up to current times?
I had adaptive cruise in my ‘17, but the ‘2020 version seems much more refined. Adaptive steering on the 2020’s is insanely good. Were you able to delete the 3 honks for when you leave the truck on with the fob in your pocket?
Love your videos, Love your truck, the 2020 is it a 7.3 gas job , what was the tires brand you were speaking of ? I live in Virginia, in the states , born and raised in WV most of my life and man we use to get big snows in Beckley, West Virginia, stay safe brother and I will continue to watch your videos, , I am a you tube watching man , Retired"
Really great video. Love that saw. But...In the time it takes to fire that bad boy up. I'd already be done with an electric saw at each location... I carry both and I quit using the gas saws for anything small and or short run work. No... it don't cut as fast. But the actual time and energy spent is less on a small job/location. No warming up. Just instant torque and cutting. I can cut a cord with 4 batteries too. The extreme light weight makes moving it around quick as well...Anyways... Electric changed my life on saws.
Why’s that? I know you’re a Ford guy, but you really have a positive review of the Ram Limited awhile back. I’ve had lot of a little issues with the truck that when you take it back to the dealer, they can’t replicate it. I love the cameras, tech and styling. Hate the Cummins, I think the seats are hard as a board when you compare them to the cushy platinum seats....among other things. The Ford power and that 10-speed is a game changer though.
Fivesfilms Ywah I do like both trucks and I was impressed by the feel and power of the Ram when I drove it but now that I have the 2020 no other diesel out there compares to it.
Gareth Heel I used for scan to change the tire size so my speedometer is correct. I wasn’t able to tell the pcm to relearn the new settings so the light will go away .i need to hook up my laptop and take it away
So i sas the video on Carli's CZcams channel that the 2020 kits are a go from the 17 to 19s just an inch different. We gunna see a pintop on that bad boy soon??!!
That saw made fast work of that tree 👍. Have you considered a front receiver and a hitch mounted winch so you could winch out from either direction in case you get stuck? Love these videos.
I have the same saw , husky saws and leaf blowers are real good , I use toro lawn mowers and stihl brush cutters and hedge cutters , can’t do nothing now all the suppliers have shutdown , I see the snow has payed no attention to the global BS warming lol 😂
I tell ya what with all this covid19 stuff going on whst you were called into do would be great. In Michigan it's all soggy everywhere but I cut trees for a living I mow lawns too but no grass growing. I'm 36 and I say this because in my life I was or who's my age were at the tail end of trucks with granny gears thst were manuals but I guarantee on a automatic transmission they could make an auxiliary granny gear for 1500 to 3500. Any one who was alive long enough to drive 70s or 80s trucks talk about how they miss that gear. I remember bailing hay and my dads friend had a 76 or 77 high boy ford with one and in granny gear with no pedal applied you could pull a fully loaded 16ft trailer with haybailes through 4in of mud. I just mention this because in diesel or gas it would be another option to have to creep through or go up hill within reason and not worry about wheel spin. Good video
Hopefully since it’s a “work truck” you’re not ignorant and actually get the truck and undercarriage cleaned regularly do it doesn’t rust because it would be a shame
Yeah wow....thanx 4 demonstrating the toughness of ford.
I could smell the 2 stroke all the way here in Florida 😂👍🏼🇺🇸🇨🇦
Good truck and a good saw...all u need. Good video...keep'em coming and stay safe.
I used to run a husky 455, great saw! Loved that thing! I was a stihl guy as well, until I bought the husky. 👍🏻 I demo’d the new 500 series but went with the carbureted 455 because of the lower cost and it felt that there was more lower end power. I also liked not having to deal with the fuel injection issues in the mountains. Also, I ended up with a PS after 3 Cummins trucks, thanks to you. Love my PS! 👍🏻
Yeah that truck is awesome I love Ford trucks great job. 👍🏻❄️
“We’re just a boat home” lol nice video guy 😀
Just when we thought winter was done... here’s hoping your not to impacted from this COVID-19 and keep healthy and busy man!
Love the video with the chain saw action, I have three Stihl, one Husky and a Dewalt 40 volt battery powered that is really handy for small stuff.
Stay safe....
Another day in the office, awesome saw !!!
Nice truck!🇺🇸
Awesome video man, I love my 6.7 Powerstroke.
Great video again buddy.stay safe 👍
Husqvarna.... never used their saws.... but back in the day rode the dirt bikes... lol sounded the same. Nice job..
Use the Off road screen on your display and it will give the grade percentage. gives people better understanding on how steep it actually is cause videos don’t do justice. Awsome video keep it up
It is hot here in Indiana right now...enjoyed watching this video vlog again! 😁
Truck is a beast! Nice!
Hey great video. Noticed you have BakFlip on your truck when you where getting the chain saw. I have a 2019 F350 and would like to get the BakFlip but I have a fifth wheel hitch in the bed. Would you mind measuring how far the BakFlip actually sits under the top of the bed rail, so I can see if my hitch would interfere. Thanks I appreciate it. Keep up the great video’s
Tell us more about you data monster. I just ordered one but they DON'T make tunes for my truck....2012 ram 6.7. Have you heard of other makes or years that go together? It looks cold there. It snowed a bit here in Arizona today. Nothing stuck. Thank you and God bless!
Nice scenery!!!... looks besides a work day looks as fun also..stay safe with this virus going around!! Saludos!!
Luis Estrella you too my friend
Ditto, Luis. Y'all Be Safe!
Ty for sharing 😁
Some others from Mexico; great video.
I think i missed it but which tires were you running again
Ok I have to ask now that you've had the Falkens on for a while. Better buy then the Generals on the 2019. Mainly interested in wear and snow performance. Maybe do a video comparison on the two up to current times?
Tom Nelson Falkens for sure. ATX has great snow traction but wore very quick while towing. They are coming off in Friday.
I had adaptive cruise in my ‘17, but the ‘2020 version seems much more refined. Adaptive steering on the 2020’s is insanely good. Were you able to delete the 3 honks for when you leave the truck on with the fob in your pocket?
zfilmmaker Yup it’s done
workplaytv no problems after? Can you do a how to video?
Do you only work on bell sites? And what is the weight difference of that Huski vs a farm boss 291
Scott Benn All sites. Close to same weight just feels better
Suggestion: If you set your console display to "Off Road", it will display the angles.
In terms of snow preformance which tires are better, the wildpeaks or the grabber atx?
samadams6707 Both great. I have had the ATX in more extreme conditions so it’s hard to say. Can’t go wrong with either
Love the vids. Why is the check engine light on
F O R D
Nice!! Stay safe... :-)
Love your videos, Love your truck, the 2020 is it a 7.3 gas job , what was the tires brand you were speaking of ? I live in Virginia, in the states , born and raised in WV most of my life and man we use to get big snows in Beckley, West Virginia, stay safe brother and I will continue to watch your videos, , I am a you tube watching man , Retired"
Allen. L Persinger jr it’s the 6.7. They are falken wildpeak at3w
What’s the name of the tires you got on
How did u go about getting the cell tower contract
That’s some saw your number one employee picked out. .. how did it feel to run it nice and sharp
Burnin Gas hahaha pretty good buddy
Little thing turns on
I’m debating getting the new 572 xp husky
No debate get Iran’s let me know maybe I’ll buy one for ya! Haha
Hey quick question, do you ever regret not getting a long bed or are you glad you have the short bed?
Anonymous I have lots of trailers so no need for a long bed
I hope your cell phone has good reception ! If you need to call for back up!
I have to agree 100% on the on/off button. Lol
That ford kick ass, what brand tire are on your truck? Mt or ATS? Do u have a hitch mount winch for Safty while your out alone . Great video 🇺🇸👍🏻
Jim T They are falken wildpeak at3w . Nah I don’t I just hope for the best and trust my truck. Lol
@@workplaytv why no general grabber x3s?
Cory Lee I like trying to news to report back to you guys
Nice 👍 if I may suggest for the next one /○ , in the 'instruments panel' therd is such an instrument. ! 👍☺👍😆😆😆✔🌎⛵🐬🌠✨
Does the 2020 come with turn signals?
Matt R huh?
Make more vids bro you seem down to earth
Its 70 degrees out here in Las Vegas
What tires you riding boss?
17cementpro falken wildpeak at3w
Really great video. Love that saw. But...In the time it takes to fire that bad boy up. I'd already be done with an electric saw at each location... I carry both and I quit using the gas saws for anything small and or short run work. No... it don't cut as fast. But the actual time and energy spent is less on a small job/location. No warming up. Just instant torque and cutting. I can cut a cord with 4 batteries too. The extreme light weight makes moving it around quick as well...Anyways... Electric changed my life on saws.
'love winter, here in central Europe no more snow unfortunately...
Have you noticed the 10-speed hunting for gears a lot while driving and towing or does it hold steady pretty much?
Fivesfilms Nope the transmission knows what it is doing
I went and drove a platinum on Friday. I really liked it which makes me so torn between that and my Ram Limited Cummins.
Fivesfilms I wouldn’t be torn. Lol
Why’s that? I know you’re a Ford guy, but you really have a positive review of the Ram Limited awhile back. I’ve had lot of a little issues with the truck that when you take it back to the dealer, they can’t replicate it. I love the cameras, tech and styling. Hate the Cummins, I think the seats are hard as a board when you compare them to the cushy platinum seats....among other things. The Ford power and that 10-speed is a game changer though.
Fivesfilms Ywah I do like both trucks and I was impressed by the feel and power of the Ram when I drove it but now that I have the 2020 no other diesel out there compares to it.
Why do these trucks bounce so bad when you start to spin?
Stiff suspension with nit much weight in the back
why is your 2020 already showing a check engine light on the dash?
Gareth Heel I used for scan to change the tire size so my speedometer is correct. I wasn’t able to tell the pcm to relearn the new settings so the light will go away .i need to hook up my laptop and take it away
How the hell did you get a banks system? Is that a tuner or just the gauge? My 21 is a pain to find tunes for because of the new bs
Haha yeah it’s just the Idash
@@workplaytv damn I got super excited not gonna lie. Once My warranty is up I think that’s when they “naturally” get more power lol
@@josephcraig765 lol for sure man
Have you ever thought about running a winch on your trucks with the remote sites you need to access
Andrew Joyce not yet
So i sas the video on Carli's CZcams channel that the 2020 kits are a go from the 17 to 19s just an inch different. We gunna see a pintop on that bad boy soon??!!
Carli is sick
@@corylee2261 what charli are you talking about?
Winter will end, No Yellowstone has not Erupted... yet.
If only I had that the day I made the chainsaw ninja warrior video lol
3:22 your check engine light is on. Lol
LOL
do you live in Alaska? Greetings from Russia😎
Nova Scotia
That saw made fast work of that tree 👍. Have you considered a front receiver and a hitch mounted winch so you could winch out from either direction in case you get stuck? Love these videos.
hogdriver88 hey I actually am looking into one
Cool beans. Would be worthwhile on those snowy trails by yourself. We all look forward to the video!
another 20cm this morning when i woke up what can ya do lol
I have the same saw , husky saws and leaf blowers are real good , I use toro lawn mowers and stihl brush cutters and hedge cutters , can’t do nothing now all the suppliers have shutdown , I see the snow has payed no attention to the global BS warming lol 😂
I tell ya what with all this covid19 stuff going on whst you were called into do would be great. In Michigan it's all soggy everywhere but I cut trees for a living I mow lawns too but no grass growing. I'm 36 and I say this because in my life I was or who's my age were at the tail end of trucks with granny gears thst were manuals but I guarantee on a automatic transmission they could make an auxiliary granny gear for 1500 to 3500. Any one who was alive long enough to drive 70s or 80s trucks talk about how they miss that gear. I remember bailing hay and my dads friend had a 76 or 77 high boy ford with one and in granny gear with no pedal applied you could pull a fully loaded 16ft trailer with haybailes through 4in of mud. I just mention this because in diesel or gas it would be another option to have to creep through or go up hill within reason and not worry about wheel spin. Good video
Hopefully since it’s a “work truck” you’re not ignorant and actually get the truck and undercarriage cleaned regularly do it doesn’t rust because it would be a shame
Or oil sprayed 😉