Just a short video on the multiple messages. I’ve got about the bolt not dropping after cleaning or taking apart. Email:info@azccwclasses.com Text: 602-490-9523 John
Just picked up FPC today !! I've been following your vids since I first ordered it. Great INFO !! Thanks so much for what you do. We all would be lost without you. Thanks SIR.
Thank you so very much, You are the most helpful video I’ve seen. You are just great, again Thank you. This worked like a charm after hours of frustrating pain 😅
Thanks. I find it hard to believe you don't have more subscribers. I haven't had any of these problems because I read the directions, but I did drop the firing pin out a couple times while handling the bolt.
Mine come out somewhat easy, but you have to push down a bit on the gun the same time you release the pin in the stock. Basically releasing some of the pressure from the spring in the butt stock.
hey brotha john, awesome n great vid there , def. wanna talk more , only have email though here , LOVE talking 2A n such , i am a u.s. marine vet here 93' to 97' active n will forever support you , thanks > tom !
So when I do the functions check after I squeeze the trigger and then continue to hold the trigger and pull the charging handle. When I release the trigger nothing happens. But when I squeeze the trigger again it clicks. Is something wrong?
I have not been able to witness this in person. But I would check to make sure that charging handle where it contacts the pen and the bolt should be the front of it in between the bolt pan and the receivers where it should sit so if you take the bolt out, put the charging handle on all the way to the front then put your bolt in should be correct. Hopefully this helps you.
Just picked up FPC today !! I've been following your vids since I first ordered it. Great INFO !! Thanks so much for what you do. We all would be lost without you. Thanks SIR.
You’re welcome and anytime.
Just saved me a headache 😂 thanks man
Good! 😀
Thank you so very much, You are the most helpful video I’ve seen. You are just great, again Thank you.
This worked like a charm after hours of frustrating pain 😅
You're welcome!
That’s what it was, thanks! Trigger just needed to get pushed back
It is an easy fix. Glad it worked for you.
Pretty useful Thanks!
Crazy, f all this go bufferless!
Thanks. I find it hard to believe you don't have more subscribers. I haven't had any of these problems because I read the directions, but I did drop the firing pin out a couple times while handling the bolt.
It happens. You’re welcome.
I get so much great infomation from this channel, thank you.
You’re welcome.
Ty
You're welcome.
Thanks
You're Welcome
Lock the safety and dont remove safety until your done cleaning
Yep.
The pin in the but stock won’t lift. I can’t disassemble it?
Mine come out somewhat easy, but you have to push down a bit on the gun the same time you release the pin in the stock. Basically releasing some of the pressure from the spring in the butt stock.
hey brotha john, awesome n great vid there , def. wanna talk more , only have email though here , LOVE talking 2A n such , i am a u.s. marine vet here 93' to 97' active n will forever support you , thanks > tom !
So when I do the functions check after I squeeze the trigger and then continue to hold the trigger and pull the charging handle. When I release the trigger nothing happens. But when I squeeze the trigger again it clicks. Is something wrong?
Field strip it and make sure all parts pieces are correctly put in.
My charging handle may have fractured my face under my nose by hitting me while firing! How do I fix this!
I have not been able to witness this in person. But I would check to make sure that charging handle where it contacts the pen and the bolt should be the front of it in between the bolt pan and the receivers where it should sit so if you take the bolt out, put the charging handle on all the way to the front then put your bolt in should be correct. Hopefully this helps you.
What or where did you get that holder? For the gun itself? So cool, never seen one before.
lokgrips.com/gun-stands
The Glock 17 works with the S&W FPC ??@@hollowpointdefense
@@redveiner no. I had to shave it down to fit.
LOKBF23 for 20% off till tomorrow.
where did you get the birdcage mussel device from ? i want one for my responce
Kaw valley.
are you still using that mag retention holder on the stock?
Storage yes, when out shooting, no.
Thanks for Heads up havnt had issues but great reference.Have you come across any Trigger upgrades on these.🤔
Not yet