#BulletSolano
Vložit
- čas přidán 8. 03. 2017
- Hi Guys in this episode I'm replacing the thermostat, in my car you have to remove the cooler intake pipe, in a stock Accord is the same process to remove the intake.
make sure your car is cool and dispose your coolant properly because if animal drink it they will die because is sweet to the taste.
If you have any questions on this installation make sure you comment in the video.
Don't forget to check my video on How To replace valve cover gasket for a 1998 to 2002 Honda Accord 4 cylinders
amzn.to/2W4ILQq Thermostat
amzn.to/2WlTx50 Impact Gun
• 2000 ACCORD VALVE COVE...
Gratitude www.paypal.me/bullet23
Also check my Welcome to the channel video • WELCOME TO THE CHANNEL
Thanks guys and don't forget to subscribe. - Auta a dopravní prostředky
IMPORTANT - only take off the top thermostat cover with the 10mm bolts.
DO NOT undo the 12mm bolts of the rest of the assembly behind as it is very difficult and time-consuming to get back without leaks as there is a big pipe going into the side of it at 45 degrees with only a rubber O-ring to seal it.
Thanks bro for video bro ,I replaced thermostat. And followed your instructions when you have to add coolant n bleed the cooling system
No problem bro
hi Bullet still working on my Honda Accord 2000, heat problem. Replaced thermostat at shop. Nope. Now, I go back we are gonna do heater core flush with Machine. $100+. They say the heater control valve is good. Blend door actuator good. Still no heat! I do not have a place to flush heater core by myself. Changed cabin filters. I have new Heater core valve coming from RockAuto just in case.
Great video, helped me a lot, nice clean hot rod engine you got. Thanks.
+David Cobb thanks Man, no problem I'm glad I help you
Thanks man, your video was very helpful and I saved a lot of money as a result of it
Ok no problem
Real helpful man ive subscribe brother💯💪
Thanks bro
Great camera and explanation! Thanks!
+Manuel Torres no problem
+Manuel Torres and my cámara is a Sony rx100
Thanks been a help.
Bien explicado, hermano.
Gracias
Great video, thanks
Your welcome
Good info good vide thanks bro!
No problem bro
Thanks!
U da man!
Gasket sealer on the thermostat housing?
Cool
+Jenny Escobar thanks
Yeah I’m getting a f23a1 . I have the same engine but it’s manual . 2001 accord .
Ok, is better to get the same engine
I got same problem overheating al, the time. I am about to replace the thermostat.
Excellent video my friend, understood very well... Great detail. One question. On the hose you are replacing, it looks like it has been replaced before, because I noticed going back towards the firewall it does a loop around. It's not supposed to do that is it? It seems like you could get a shorter hose and run it straight back with no loop around... Also, excellent English. You explained the work very well... Thanks!
Thanks I really appreciate it, and that hose is like that from factory i already replace it it’s the one that goes to the heater core
Hi Bullet, about the cooling, system, Im got problem with the cooling line going thru throttle body. my question is if possible to shut that line or doing something different.
You have to fix it, get another throttle body from the junkyard if that’s the problem
My 99 accord v6 heater will only get hot if I turn temp up around 85 and up my antifreeze is full checked my actuators there both moveing and heater control valve to temp Guage normal just about everything I can think of a car place told me could be plugged heater core wouldn’t be overheating if it was or if thermostant was bad also.
Most likely your ac control is bad
Like 👍🏽👍🏽👍🏽
Hi good video I like your videos and explains how to do work on your car easily I have a question where did you get that upper strut bar for your car is that a 2002 SE VTEC because I have the same car and I'm looking for a strut bar like that for my car
+felixmarte123 hi Bro thanks and I don’t remember I get that strut bar like 4 year ago I think I get it on eBay and my car is a 2000 se
+felixmarte123 check on eBay
I just order one from eBay and mine has five holes but I can't connect it because of the two bolt connected to the black one that comes with the factory card I'm going to send it back and I'm going to continue my search but the one you have in your car that's the one I need for my car
Thank you and keep making good videos your videos is good
+felixmarte123 thanks Bro
Thanks for the great video! I'm still a little unclear about the procedure of bleeding out air at the end. By topping off antifreeze at the radiator cap while engine is off, the antifreeze will get sucked into hose and bubble up to bleed out at the loosened nut above the thermostat by itself? Or, should the engine be running in order to bleed out the air inside the hose? Btw, any idea where the coolant temperature sensor might be located on the 98 accord? Is it near where the thermostat is located, or down under near the radiator drain plug? My ignition switch went out and am in the process of getting that replaced. Don't know if that is the cause of my radiator fans not coming on while the engine is running, or perhaps a faulty thermo coolant sensor switch is to blame.
Thanks, engine needs to be off, add coolant and open the bleeder valve until air and coolant come out from the bleeder valve
Looks like your heater hose broke down near where it attaches to the block. This is under the distributor o-ring, which is probably dripping hot oil onto the hose. Change that o-ring or the new hose will also get damaged.
Thanks, yes the hose broke down under the distributor but that’s from my old distributor the one that I have right now is new and no leaks on it
Is there a ground wire that has to be bolted back on or your car won’t start
I don’t remember but you have to make sure that everything is back on it
In you opinion how much would you charge to swap a f23 engine for an accord ?
Labor is around $800, that’s what I charge
Well with my boyfriends help we managed to change the thermostat started the car and it took a couple of minutes but it shot to top H again. Nothing felt hot but under the thermostat was warm and the skinny metal pipes going in to the engine were warm...thats it ??? You video was very helpful walking us though with great instructions and explanations. All this cr*p stated with an 02 bank A Sensor goes out and check engine light. Cant pass DEQ and now Regi is exp 1 mo ago. Subbed your channel today! Got any ideas that might help my situation??? P&L ...theB
If you bleed the system that’s it, and just replace the O2 in the exhaust manifold
No I got the wrong one I got the one with 5 holes and I don't want to remove the factory two holes so I have to order the one with three holes or two holes
+felixmarte123 ok yes I have the one with 3 holes, you right
Hey bullet my car over heats when I turn on the AC...but doesn't when the heats on l...my fan are working fine I just replaced the radiator...I'm about to do the thermostat...but does this sound familiar at all..is my problem the thermostat??
Replace the thermostat and bleed the system
czcams.com/video/Qpyg7-Vigwo/video.html
@@BulletSolano yo I would subscribe but can't right now but my guy there a email I can get to send you a video my Accord is doing something funky
Hey man my car overheats and steams when I’m at a stop but when I drive it goes away both of my fans turn on can my T-Stat be the case?
I hope you’re not driving a lot like that, could be anything, broken hose, broken radiator, bad thermostat, you need to look for the leak
@@BulletSolano nah just happened today and the cars been parked ever since I’ll look for leaks thanks man
No problem
hey boss , what’s the name of that hose that was leaking on you. I have the same problem but i need to find the correct hose. thanks man !
Hey bro, the one under the distributor? Heater hose!!
thanks bro appreciate it.
No problem bro
Wow great explanation my man I’m trying to fix car and I’m 13 this helped a lot. Thanks.
No problem
Props to you working on a car at that age
Thanks
My car overheats when i make it too a stop and let it idle but when i drive it , cools down to normal on the gauge. It’s has oil and i put coolant . Last time the coolant went back in the overflow tank next to the radiator . You think changing the thermostat would help that got an 01 Accord ex
Also my fans work so i know it’s not that
When is the last time you change the thermostat?
But I think the valves are bent!!
I haven’t change it ... so i hope it’s that . Which valves are you talking about ?
Intake valves
I think it’s head gasket . You know a good site to buy engines
Hi buddy, I have a water leak on my engine and the mecánico is telling me that the water leak is in El porta termostato.... Cual es el porta termostato? Thanks
Hi bud, is the thermostat housing
I have a 6th gen but V6. Is in the same place the thermostat?
No, is on the other side, under the plenum, next to the battery
🌚 hi
Great job bro, I have a lil bit of trouble. I just changed that house and my 02 Honda accord and my temperature gauge doesn't read hot it stays cold but it doesn't overheat I checked all my Fuses and release and they all work . What can it be.
Thanks, did you bleed the system??
In the thermostat housing there is a valve open it and let the air come out
@@BulletSolano I'll try that thanks again I'll keep u posted
Ok
@@BulletSolano sup bro its still not working can my ecm be the problem
Hey bro, maybe is your temp gauge
At what temperature do the fans kick on
Around 180 to 200 degrees
Got a question does the Accord need a thermostat or can I run it without one
To be safe get one
The car will run fine without a thermostat but, the engine may not get up to operating temperature, especially in winter time.
Hey bullet, did you use a gasket on the new thermostat? A new one?
Yes, always
How do you know if the thermostat is bad and the temperature sensor?
Is the thermostat stuck close your car is gonna overheat and the temp sensor is gonna give you different reading
Bullet Solano thanks
So you open the bleeder while the car is off?
Yes
Where You Bought That Header ??
eBay bro
I can't get my key out of the ignition unless I disconnect my battery what does that mean bro?
Probably your ignition cylinder is damage, next time spray some wd-40 on the ignition to see if that resolved the problem
It didn't work do i need to replace the ingnition?
Yes
Do you have a video on how too?
No bro, let me see what I can do
Sup Bullet, where did you get your thermostat and you think the one's they are selling on Ebay aren't really Honda OEM parts ?
Hey bro, get one at the auto parts store
@@BulletSolano word !!! Tnx
No problem
I didn't see where you drained the anti freeze. This is a huge step which has other challenges like disposal of used anti freeze
I didn’t replaced the antifreeze, the amount loose is minimum
Thanks I was about to drain my whole system 😅 that would have been a hassle 🤦🤦
If I didn't bleed the system would that be the reason it's running hot now
Yes
@@BulletSolano ty bro bc I changed the starter but I left hose off the one that goes to the thermostat and I think it may have locked up but I definitely didn't bleed it damn
No problem
U think I need new thermostat
Do u losen up the bleeder valve all the way or just a little
As much as you move the camera what you do is dizzy
HEATER HOSE . THATS WHAT ITS CALLED . I GOT A WEIRD HOSE CUZ THE PARTS GUYS NO NOTHING. IM GOPING TO TAKE OFF THAT HOSE AND PUT THIS ONE. ALWAYS ROOM FOR IMPROVEMENT
czcams.com/video/q4UDeWIkqjY/video.html
To be honest...I never had to bleed the system
dude you cant see the work as youre dissambling the unit
Sorry bro I can make another one but is really easy to get to the bolts
Mike Lafferty-Shockency shut up noob
GD UPLOAD I'M SURPRISED YOU DON'T WORK N AUTO REPAIR
I love working on cars man, I don’t want to depended on it because I don’t want to hate it
Lose the freaking loud techno crap! Lose the big smart watch and ring!
😂😂
Bro don’t make videos with things in your mouth. Video picks it up clearly. Content is good but the noise of you having something in your mouth is suuuuuper annoying.
Speak English
+Rus ridge sorry Man I can't, 😭😭 I'm trying
I do understand what you said 100%. You don't have to say sorry. I am waiting any instruction video from Rus ridge
This video is perfect and your English is fine, Russ is just being an ass.
Jaja it’s ok bro I dab on my haters
Thanks Bro