HOW TO DELETE N249 ON AUDI TT!

Sdílet
Vložit

Komentáře • 45

  • @smetselaarcod7032
    @smetselaarcod7032 Před 3 měsíci

    Best video of the delete ever thanks💪

  • @alexhansen6064
    @alexhansen6064 Před 2 lety

    Did you say to hook up the hose from the diverted valve to the N112? I’m just wondering I just got a car and the guy tried doing a bunch of random things to it

  • @blakkno666
    @blakkno666 Před 2 lety +11

    I'm not sure you get more boost.. just prevents boost leaks.

  • @danielmiller3967
    @danielmiller3967 Před 6 měsíci

    That whistle when you start the car is the sai pumping air into your exhast

  • @GCS88
    @GCS88 Před 2 lety +6

    The n249 is such a useful part I dont know why alot of 1.8t owners are so keen on removing it, I kept mine after the sai and n112 delete

    • @user-rd2yd5qh1p
      @user-rd2yd5qh1p Před rokem +3

      Someone heard but did not hear, it seemed to him that it was better without n249 and everyone like a herd of sheep was better, and no one knows what n249 is for!!! Funny story!!!

  • @wranglercjseven69
    @wranglercjseven69 Před 3 lety

    what are the hoses you got and where did you get the thanks great video thumbs up oops got my answer from reading comments

  • @Lexusluugis
    @Lexusluugis Před 2 měsíci

    Bro is not yapping mans going staright to the point gotta love that

  • @SuperCarShorts911
    @SuperCarShorts911 Před 2 lety

    I have a fault code for this sensor if I were to do this would the fault not return if I clear it?

  • @johnpentland949
    @johnpentland949 Před 3 lety

    Hello i got a 225 bam engine in mj mk1 leon when I start it and then it cuts off

  • @Matty-vl1lf
    @Matty-vl1lf Před 3 lety

    Sick video man. Planning to do this in a couple of months. What vaccum hose size did you use?

    • @DOHCamm
      @DOHCamm  Před 3 lety

      Thanks! I’m not exactly sure I don’t remember but it’s the same vacuum hose as most of the lines

    • @2j649
      @2j649 Před 3 lety +2

      3mm or 4mm will work bud

  • @sofakingdizzy
    @sofakingdizzy Před rokem +1

    aren’t use supposed to use 91 octane gasoline ?

  • @jamesangus9144
    @jamesangus9144 Před 4 měsíci

    Less boost cos your turbo is slowed down by boost going back into the turbo when changing gear without the n249.

  • @steambuns2283
    @steambuns2283 Před 3 lety

    whats it called the on that u blocked off with a blue cap?

  • @kimpatricksstorhagen185
    @kimpatricksstorhagen185 Před 3 lety +3

    i only get about 4psi of boost🙃 what do you think might be the problem? dont see any leaks in hoses or nothing and i have 0 check engine lights😅 its a 1.8t

    • @tiber4159
      @tiber4159 Před 3 lety

      N75 valve needs replacing.

    • @shsk8880
      @shsk8880 Před 2 lety

      did you fix the problem

    • @kimpatricksstorhagen185
      @kimpatricksstorhagen185 Před 2 lety +1

      @@shsk8880 i changed turbo and got the car chipped since i think the problem was in the ecu, now i get 1.4 bar but car stutters when accelerating, think it might be bad plugs

  • @kylerwarren8285
    @kylerwarren8285 Před 3 lety +1

    Where you get the vacuum line cap from

    • @DOHCamm
      @DOHCamm  Před 3 lety +1

      Any auto store like advanced auto will have them

  • @m-rgan
    @m-rgan Před rokem

    what blow off valve?

  • @mercmen9588
    @mercmen9588 Před 3 lety

    How much more boost do you think your making, mine makes 10psi without that delete.

    • @DOHCamm
      @DOHCamm  Před 3 lety

      it doesn't really make much more boost peak, its that it will hold it constant to redline better

    • @mercmen9588
      @mercmen9588 Před 3 lety

      @@DOHCamm Alright thanks for the quick response, I'm gonna do it on saturday. Thanks for keeping the vid nice and simple hope to see more coming from the TT.

    • @kimpatricksstorhagen185
      @kimpatricksstorhagen185 Před 3 lety

      i only get about 4psi of boost🙃 what do you think might be the problem? dont see any leaks in hoses or nothing and i have 0 check engine lights😅 its a 1.8t

    • @jamesangus9144
      @jamesangus9144 Před rokem +1

      Mine makes 22psi with the n249 and has better throttle response with it than without it. If you delete a fully working n249 then you will lose a little performance.

  • @johnovegas
    @johnovegas Před rokem +1

    I love the lack of engineering knowledge - yea, "you don't need any of that". just keep it plugged in so you don't get a check engine light - thumbs up.

  • @paulattree4171
    @paulattree4171 Před rokem

    is that car mapped. only mine not that fast tt quatro 225

    • @DOHCamm
      @DOHCamm  Před rokem +1

      Manual boost controller turned up

  • @edthatsit8035
    @edthatsit8035 Před 3 lety

    It just me or the whole vid a green screen?

    • @DOHCamm
      @DOHCamm  Před 3 lety

      Hmmm haven’t heard of that yet from anyone

    • @edthatsit8035
      @edthatsit8035 Před 3 lety +1

      @@DOHCamm I might need a new phone

    • @FallinWolf1
      @FallinWolf1 Před 2 lety

      this comment has me died
      but any good gaughr cluster poeple?

  • @emotionalintelligence776

    How not to properly delete anything on your car, Lol.

  • @user-rd2yd5qh1p
    @user-rd2yd5qh1p Před rokem +2

    Do any of you even know what the N249 is for? Do an experiment and attach a boost gauge to the vacuum line before the blow-off with and without the N249 and tell me if there is any difference in the behavior of the vacuum and the boost? What you are doing is childish! The N249 is put there so that in an emergency mode when the turbine over-inflates for some reason, it can leave the blow off open to prevent possible engine damage!!! Download an engine manual and read what the N249 is for and how it works!!! Complete nonsense, he held more boost in the highs :). If you want more boost in the highs just go tune the car!!!

    • @TronVila
      @TronVila Před 5 měsíci +2

      It’s not for an “emergency turbo over inflation”. It’s so the diverter can open instantly as commanded by the ecu, rather than the diverter valve operating soley off a standard vacuum source. Removing it to simply and eliminate old things that fail is not childish.

    • @tyler70878
      @tyler70878 Před 24 dny +1

      ​@TronVila in the event that the Westgate does not open and over boosting occurs, it triggers the n249 system which keeps the diverter valve open to prevent catastrophic failure. So yes it does do this, it's another important feature of the n249 system. And why you shouldn't delete it.

  • @davidross-oo2vh
    @davidross-oo2vh Před rokem +1

    I have a 2001 beetle 1.8t
    I have never seen such junk in my life..one minute its the afm..then cam sensor..then diverter valve..misfire...rich bank 1..loss of boost pressure...check eng light on...limp mode...boost pressure sensor code...all these codes...this car is pure garbage...and the fans never stop running...I must say i will NEVER own another vw 1.8t...i never had any problems out of my 82 rabbit 1.6 turbo diesel...it has almost 400.000 miles on it...runs perfect and gets 52 mpg

    • @RafaelBelo14
      @RafaelBelo14 Před rokem +1

      Dont Blame an engine because of the old owner. I had plenty dif cars , but non reliable like 1.8T . Had One for 4 years , drive it all days , i did long distances on vacations with it too,almost had 400 000km , none a single problem besides new clutch and cranckshaf sensor... Didnt burn any oil or freezintg cooling

    • @davidross-oo2vh
      @davidross-oo2vh Před rokem +1

      @@RafaelBelo14 old car..not owner..I've owned around 300 cars so far and this antique vw is the worst car I ever seen..

    • @RafaelBelo14
      @RafaelBelo14 Před rokem

      @@davidross-oo2vh i had old car in Extreme good conditions, and recent Cars in bad conditions... Owners are the Key

    • @davidross-oo2vh
      @davidross-oo2vh Před rokem

      @@RafaelBelo14 people I got it from did nothing to it..I've replaced window regulator and motor..Both cooling fans..and module..Thermo switch and temp sensors..coil packs and plugs .valve cover gasket..N75 valve.. diverter valve..249 valve.. vacuum lines..check valves .changed oil and filter..air filter..next on the list is the airflow sensor..I still have a code po172 bank one too rich code..it bogs and stumbles sometimes..but when it runs right which is not often..lil turbo spools up and it goes pretty good... Its not fast ..When I get it figured out I'm probably going stage 3 tune . downpipe and exhaust..race n75 valve..this will be around 230 h.p. My 82 vw rabbit 1.6 turbo diesel with the Garret turbo is just as fast as this 1.8t...450.000 miles on it..I've never had any problems with the diesel engine..

  • @jamesangus9144
    @jamesangus9144 Před rokem +1

    You just downgraded your car.