Checking Out The AtomStack B3 Enclosure - On Board Camera, LED Lights & Fume Extraction
Vložit
- čas přidán 15. 02. 2024
- Checking Out The AtomStack B3 Enclosure - On Board Camera, LED Lights & Fume Extraction.
In this video I will show you how to fully assemble this enclosure on Atomstack A24 Pro frame. I will take through the process of setting up the camera and I will do some tests on the way.
This enclosure is compatible with Atomstack X12/ 24 PRO/A6/ A12/ A24 PRO
Shopping:
UK
AtomStack B3 Enclosure - shrsl.com/4eysq
AtomStack A24 Pro - shrsl.com/4bfxj
AtomStack F60 Air Assist - shrsl.com/4bfxm
USA
AtomStack B3 Enclosure - shrsl.com/4eysq
AtomStack A24 Pro - shrsl.com/4bfxp
AtomStack F60 Air Assist- shrsl.com/4bfxr
Disclaimer*
This video is sponsored by Atomstack, the enclosure has been provided to me free of charge. However I was not asked to say anything nice about the product and thoughts presented here on this product are my own.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #atomstack #B3enclosure
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe. - Jak na to + styl
Fantastic review, Tomasz! 😃
Those enclosures are great! They help your eyes and lungs!
Anyway, stay safe there with your family! 🖖😊
Exactly and this one seems to be loaded with cool features
Out of all the lasers you have shown us This 1 with the enclosure will be best for the type of work I'll be doing thanks for showing this Tomaz 🤠
And I think this is a great choice. I absolutely love this enclosure.
Another cracking review Tomas!
Glad you enjoyed it
Hi Tomasz, A great review, and I am edging closer to having one but first I must build a fixed workbench at the back of my small workshop to accomodate the laser!
Well I'm planning to make a full unit to accommodate my xTool and possibly one more 🤔
Nice review and kit. Still not on my radar as a purchase but I do hope you get lots of use from it. Take care & stay safe.
Very nice kit indeed 👍
I wish this had been available when I set up my laser. the cheap (not cost wise) one that I picked up broke the second I set something on top of it. now its held together with the handymans secret weapon.
I'm guessing you don't really smell anything underneath the edges while its running if it kept the entire thing that clear of smoke and smell when you opened it up afterward.
No you don't smell anything as it operates. Just keep it closed about 10 seconds after the job is finished. When you open it you will be able to smell it slightly as the residue builds up on the walls of the enclosure. Bit overall it's not bad at all.
Can it cut 3mm ABS? Thinking about cutting holes in enclosures.
Abs will tend to melt and release some harmful fumes. Don't recommend it
I have read some say it melts others say it’s fine. Was thinking the enclosure and exhaust takes care of the fumes?
@@trevorwhite9138 it does you will be polutting someone outside 😅
@@CasualDIY yeah I suppose a Heppa? Filter would be required. I haven’t found much about these diode lasers and abs. Maybe it’s the fumes that puts everyone off. I have 500 enclosure lids to cut and currently do on a cnc but laser would be faster I thinm
@@trevorwhite9138 Don't have too much experience with that. Not sure if a CO2 would be better for this. You need to get more research done on this topic.
How much did you pay for the FAKE subs???
Don't pay anything, all my subs are real and organic.