How to setup a dovetail jig for perfect dovetails each time - Trend CDJ300
Vložit
- čas přidán 27. 02. 2024
- How to setup a dovetail jig for perfect dovetails each time - Trend CDJ300
In this video I will show you hot to setup your dovetail jig so you can get perfect, repetitive dovetails each time.
Here is my first video on the CDJ300 dovetail jig from Trend - • Trend CDJ300 Dovetail ...
Shopping on Amazon for Trend CDJ300:
UK - amzn.to/49GuiiI
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#woodworkingbasics #dovetails #dovetailjig
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe. - Jak na to + styl
Here is my first video on the CDJ300 dovetail jig from Trend - czcams.com/video/wlz1P8uk2e0/video.html
Thanks for the video. I really appreciate you taking the time explaining what needs to be adjusted when things don't quite fit.
Thank you for watching 👍
Thanks a bunch for the full tutorial, Tomasz!!! 😃
Stay safe there with your family! 🖖😊
Thank you for watching mate
Well done to you. This is the most informative video I have watched on dovetail jigs. You explained the set up perfectly and I will watch it again and take notes of the step by step instructions. Thanks again for another interesting video.
Glad it was helpful!
Excellent! I've been looking forward to the follow up video all week, and i wasn't disappointed.
I set mine up at the weekend and made some test cuts thanks to your first video. But this second video goes into a bit more detail on the configuration, which is exactly what was needed. I particularly appreciated the labelling of the stock pieces, such a small detail but often forgotten.
Brilliant video....thank you so much. Best video on CZcams for this jig.....no question.
Glad to hear it 👍😄
Hi Tomasz, I've always been put off buying one of these as they looked so complicated but this video and your explanation makes it look more achievable, thanks.
Thank you, that's exactly why I have created this video. Thank you for watching 👍
Brilliant instructional video. Thank you
Thank you kindly
Great video mate, I’ve got mine set up for 18mm boards and that’s all I use it for. I used set up blocks to set up the depth of the cutter. Thanks for sharing.
Nice one!
Sod it, a couple of six inch nails and sorted 🤣... yet another great instructional video Tomasz ... the setup is a bit of a pain, but once it is then it creates a fantastic joint ... I'll refer back to this if I ever unbox my 600mm jig 👍
Hehe no excuses now mate
The one thing that’s needed but not supplied,… patience 😁
Hehe that's true
Hey Tomasz, another great informative video. So many other CZcamsrs just show what they have managed to do without the detail of setting up you showed, thank you. I do have 1 question tho' if the boards were 18mm thick what was the reason for marking a line at 15mm, was it just a rough starting point or did you measure the bit offset with a collar? Thanks again
Thank you. It's just a rough starting point. It's suggested to do that in the manual. This jig can take boards in a fairly limited thickness and that line is more or less the average medium for all of them. You will always have to make the initial test runs to get it right.
Brawo. Pozdrawiam. Alehar 😀
Również pozdrawiam 👍
LOL they are all loose
Not sure how you managed to get to that conclusion but I can assure you they are perfectly tight and you need a mallet the take this apart. As I highlighted in the video there is only one side with one pin that has about 1mm gap.
@@CasualDIY You need to rewatch your gaslighting
@@DuncanEdwards. no idea what you are talking about now, I'm in my workshop now and I'm next to this and the joints are tight
@@CasualDIY Your shows have always been a good laugh, time to go to specsavers
@@DuncanEdwards.Thanks, and I think you should 👍😅