Recommended Meshlicious Gaming Build Components
Vložit
- čas přidán 28. 08. 2024
- Let's take a look at some recommended components for your SSUPD Meshlicious Build! Next batch of cases inbound!
Case giveaway has concluded, thanks for participating! Will look to do another in the future.
Build component links- as an Amazon Associate and B&H Affiliate I earn commission from qualifying purchases, thank you for your support of the channel.
Power Supplies:
SF600 Platinum: amzn.to/2THwiWm
SF750 Platinum (really only needed for 3080 and up level of builds): amzn.to/3zMIdl8
CPUs:
i5-11400:
Amazon - amzn.to/2Wu1sl4
B&H - bhpho.to/3lbRhvM
Ryzen 5 5600X:
Amazon - amzn.to/3iePkNk
B&H - bhpho.to/3l9HTsN
Motherboards:
MSI B560 ITX (for Intel):
B&H - bhpho.to/3icfArw
Asus B550 ITX:
Amazon - amzn.to/2V6txP1
B&H - bhpho.to/3BZKs6w
3200 MHZ DDR4 RAM, 16GB kits:
Crucial Ballistix (non-RGB)
Amazon - amzn.to/3BWFxn0
B&H - bhpho.to/3lcOp1L
RGB kit
Amazon - amzn.to/3BWr1vq
B&H - bhpho.to/3zTEWAw
Graphics Cards (price/availability getting better but still higher than I'd like - check local stores too!)
RTX 3070, EVGA XC3: amzn.to/3yjQe0E
RTX 3060ti, EVGA XC: amzn.to/3yjQe0E
1TB M.2, Crucial
Amazon - amzn.to/3rKTOP6
B&H - bhpho.to/37ch1Qu
240 AIO:
Cooler Master ML240 Illusion:
Black or white versions: amzn.to/3xdT8Tk
Great suggestions on parts. For future I might mention the 'standoff mod' for the Mesh, it really really changes cable management in a big way!
Hey, just some quick tips for anyone looking at building with this case.
~You can fit a SSD under your sfx psu just barely
~If I could build again from scratch I wouldn't have used the asus strix z490, it really limits your AIO tube orientation depending on your AIO. The reason is because the IO plastic thing is a little chunky and blocks just enough to be obstructive
~Depending on your GPU I would definitely buy CableMod PCIE cables, I hated the way my FTW3 fit with the stock corsair cables and the extra flexible cables without the daisy chains on the made build so much cleaner
~Fan grills
*One last tip if you wanted custom PCIE cables, 50cm is ideal but 60cm can still easily work if you tuck the extra under your 280mm AIO
These are the gold comments
Really enjoying your Meshlicious series, especially since I started mine around the same time as you started it. :)
Btw what cables were those that you used with the psu?
You are one of the channels I have a notification bell. Thank you for your work!
Great video (as usual) we have a retailer in New Zealand who are finally offering this case so I will be making the plunge.
Some of your recommendations will definitely be taken into account going forward.
great video. would have liked to see the entire build for afar instead of just closeups.
5800x and 3080FE on a SF750 PSU here, works well and temps are no different to my mATX build with the motherboard standoff mod, going to move the GPU out a bit further with the riser mod and 3d printed bracket.
Going to print some sort of ducting for the FE's rear fan as well to help it draw in cooler air.
Curiosity purposes, i´m looking to get this case on my new pc and a 5800X, what´s the avg temps you are getting with that chip on this case?
I'm not near the machine at the mo so will have to check when I get back home..
These videoes have gotten sooo good. Amazing job my man
Excellent video as always. Thanks for all you do!
LOVING YOUR WEEKLY CONTENT!!!! HOPING IN THE NEAR FUTURE YOU WILL HAVE A LIVE STREAM AND OR Q AND A ! ^_^!!! SEE YOU NEXT WEEK ON YOUR CHANNEL!!! ^_^!! CANT WAIT TO SEE WHATS NEXT!!!! ^_^!
New subscriber here - been watching the Meshlicious for a while now as a potential for my first step into the SFF world. Hoping I get picked 🤞
Can't wait for the NR200P max.
I waited 3 months for my NR200P. I hope the max doesn't take too long
Has anyone used the thicker T30 fans in the Meshlicious with the AIO from the NR200p? Cheers
Could you make an upgraded video when it comes to 4080/4090 and 7700x/13700k compatabiliyt?
That build list is literally my future build. At least now i know a professional agrees with me.
@4:34 is that the best way to run the tubes?! That's so smart!
Hah, well the amount of space that you have changes based on how you orient the PSU, so if you aren’t able to run behind the power supply, that is one way to take up slack in the AIO tubing. I prefer snaking it behind the PSU but I realize not all are building with SFX power supplies in this case.
I must admit I do like the Asus board but I don't use usbc, and for me the aorus board offers more with better power delivery for my 5800x and also a back plate to absorb more heat from my 2nd nvme ssd. Just wondering but why not recommend the aorus board in the vid.
Very nice build!
You wouldn't happen to have any idea when the Cooler Master sfx white edition psu's are gonna drop? Was gonna get the sf 750 for the braided cables and then cooler master announced the white edition psu's over a month ago
Another great video keep up the great work! Have you also considered any of the stand off mods? I would love to see your input on it and any gains you might have with it. Also do you still recommended facing the PSU pointed towards the GPU side if the motherboard side has a tempered glass panel? Thanks!
You can absolutely run the glass panel with an SFX PSU fan facing out- just offset it inwards on the mounting holes. This does limit AIO tubing runs, so if that really really matters then turn the fan facing in and mount it on the outside. Then you have the flexibility to run the panel however you like.
I’m building 11700k on Z590, same AIO, with 3060Ti, 64G RAM, silver stone 750W, 2TB 980 pro.
Sound like a very good build for the case. Which 3060 ti?
hey do you like my list :
B550I gaming asus rog strix
EK water block 240
corsair SF750
i like this guy ideas n thoughts
Can someone explain to me why he suggests a 240mm AIO over a 280mm? I didn't quite understand what he was explaining.
**sigh** Figures as soon as I buy the NR200P (GREAT value, great case), something I like even better comes to market. lol
Same.
Ive had the NR200 for a few months, and i love the case, but damn that smaller footprins tickles me just right.
Can you fit evga 3080 ftw3 with standoff mod?
Why use WC fans as push instead of pull? Pull wouldn't be better for cable management (because there won't be any risk of cables touching the fan blades) and for cleaning (dust won't be trapped between the fan and the rad)?
For an AIO setup the performance choice is exhaust, that doesn’t mean you can’t go the other way for the reasons you described, of course. For cable management, fan grills are recommended if a cable might hit.
@@MachinesMore but I thought about use the fans in push position keeping the exhaust configuration, just installing the fans between the case and the radiator, instead behind the radiator
Where’s you get the cables?
I was looking at this case at one point but what turned me away was the vertical GPU mounting after learning that depending on the GPU heatsink you can get really bad thermals in that orientation as the card may use either a vapor chamber or large heat pipes which makes the capillary effect significantly less effective. As far as I know mostly affects AMD GPUs but it doesn't mean Nvidia ones are immune as it really does just depend on the cooler design. I think more testing needs to be done and people need to be made aware of it. Personally I will avoid cases that offer only vertical mounting as I don't want to risk a future GPU purchase that could have this problem in that orientation. Regular mounting or horizontal vertical mounts are okay.
Should I get a BeSilent 240mm or 280mm for this meshilicious case. I imagine the 140mm fans will be quieter than the 120s?
I don’t recommend the BQ units for this case. It can work but the in-line pump gets placed into an inconvenient and unsightly location for the tubing run. Stock 280 if you need it, but 240 with upgraded or good fans is fine too for most CPUs.
put in some cable management r/ssupd
Amazing 🌟
I know this is too early but when will the winner be announced?? 🥺
So, which case do you prefer? The NR200 or the Meshlicious?
For thermal performance and cooling options, easily the NR200. For looks, IMO the Meshlicious just looks so good in terms of displaying the components. For ease of build, both have their pros and cons but I’d call it even, both are very user friendly.
What Mobo would you recommend for a R7 in this case?
B550 I Asus or MSI B550 I. Both have usb-c front headers and decent BIOS. Either will run the chip just fine.
Do you think that a single 3.5 inch drive could fit into the build with a full size gpu? I have a refernce 6700 xt and an 8tb HDD im trying to put into the meshlicious
That’s going to be very difficult… other than with the “SFF” gpu a 3.5” drive is unsupported. I’d go external enclosure with your proposed setup, or look into another case like the NR200 which is more 3.5” friendly.
MSI triple 👍🏼
what would chip would you @Machines & More recommend more? Beacaúse I'll be using my build for gaming (pretty much esport titles only valorant apex legends.etc.) but also would like to stream a bit and I'm currently on full hd 144hz monitor and in 1080p the ryzen chip was out performing the 11400f in titles like valorant csgo and other esport games and im not sure what to get now , beacause i could go intel and save like 100€ and with msi cashback 40€ more and spend that maybe on a gpu upgrade 3060ti -> 3070.
Great question- the 5600X is faster on pretty much all fronts, of course you will more or less be GPU limited with your plans, but within those bounds you will still see the 5600X come out ahead. Personally I lean towards the 3060ti and 5600X combo just because I like being able to fine tune the chip and PBO2 (the 11400 at best you have power limits to adjust) and also having a better in socket upgrade path (5900x in the cheaper future is a lot more attractive than the 11900K, for example). Can you get either GPU easily? If not maybe make your decision based off remaining budget and which card you snag, if 3070 then 11400 (I recommend integrated graphics for this case since it uses the riser cable), if 3060ti the 5600X.
@@MachinesMore ill get the nr200 , but yeah i think go amd/w 3060ti is maybe smarter for what im going to be doing and playing
Winner announcement when?
What do you think about silverstone sfx-l unit in this case?
Should be fine, however SFX-L is big in the dimension that’s troublesome in the case, which is the cable outs being closer to the rads, and that makes cabling tougher. In fact an ATX unit is only a little worse in that department. But yeah, if aren’t running a rad or OK with the cable management, go for it!
I currently have a 10600k idk what motherboard to go for b560 doesn’t allow you to oc and z490 Dsi you think ocing in a meshlicious would be worth or should I just save my money and get a b560?
Hey! OC’ing the 10600K will yield some meaningful gains (silicon dependent of course) but out of the two that I’ve tried you can get to 5.0ghz quite easily and either a 240 or 280 would work for that. How much you stand to gain depends on the title you play or workflow you do… personally I prefer Z490 for the Comet Lake unlocked chips, and the board I’d go for would be the MSI MEG Z490 ITX. For me that’s the most complete board out of the stack, with the exception that it does not have a temp probe header like the Asus has (which will only matter for custom loop builders). From time to time the board will go on sale, it’s a premium over the B560 but you do get more control over the chip. The Asus Z490 ITX is also good but there may be some AIO and cpu block compatibility concerns just due to the huge heatsinks on the board.
@@MachinesMore my plan is rn is to use a liquid freezer 2 280mm with a aorus ultra z490i which I will most likely will Go through with… I heard the aio is a tight fit with the meshlicious so is there any aio recommendations for all black/no rgb other than the arctic 280?
What GPU is that at 5:32? That backplate looks sick
saphire nitro+ 6700xt
🤩
Support from Australia. Might be a bit far for shipping 😂
Greetings to Oz!
Why Not a 280mm aio?
You can absolutely do that, I personally prefer the cable management space with a 240, and also good 120mm fans to typical 140mm ones.
@@MachinesMore Bit if i User The 140mm noctuafans, the temps should be lower, Right?
nise video ;)
Thought I was going crazy but no, I can hear some weird noice/music at czcams.com/video/aUBuJsUTHVA/video.html I guess the Sennheiser HD 6XX are decend :D ...
without a second pcix slot i would never buy it
Give me monay ples