GlowShift | How To Install A 2010-2018 6.7L Ram Cummins Triple Gauge Package
Vložit
- čas přidán 15. 06. 2024
- This GlowShift video shows you how to install our 7 Color Series Triple Diesel Gauge Package into a 2010-2018 Ram 6.7L Cummins.
Get this diesel set here: www.glowshiftdirect.com/7-col...
This Gauge Package features a Diesel Boost Gauge, EGT Pyrometer Gauge, and Trans Temp Gauge, with the option of installing a Fuel Pressure Gauge instead of the Transmission Temperature Gauge. Each Cummins Gauge Package also comes with a Ram Pillar Gauge Pod created specifically for the factory A-pillar of any 4th Generation 2010-2018 Ram 6.7L Cummins. We selected this combo set for the video based on feedback from our Tech Team, who recommended these gauges and pod as being the optimal choices and best fit for the 6.7 Cummins.
00:00 - Intro
00:16 - Tools List & Getting Started
00:26 - Additional Accessories
00:40 - Boost Line Install
02:25 - EGT Probe Install
05:37 - Trans Temp Sensor Install
11:57 - Fuel Pressure Sensor Install
14:44 - Preparing the Gauge Pod
16:28 - Wiring The Gauges
18:28 - Installing The Pillar Pod
20:56 - Powering The Gauges
23:55 - Check The Transmission Fluid Level
25:25 - Outro
We kick off the installation of this Cummins gauge set by installing our Boost Bolt Adapter to the intake grid and inserting the Boost Line Fitting into the adapter. From there we move on to installing the EGT probe by drilling into the exhaust manifold. After that, we demonstrate the process of adding either the Transmission Temperature Sensor or Fuel Pressure Sensor. Once the sensors and fittings are in place we add all three gauges to the Cummins triple pillar gauge pod, followed by the installation of the pod to the Ram truck’s factory A-pillar. This video walks you through every detail of this process step-by-step and provides a complete breakdown of everything needed to install the 4th Gen Cummins gauges and Cummins gauge pod.
Additional Accessories:
1/2” Transmission T-Fitting Adapter: www.glowshiftdirect.com/trans...
Boost Bolt Adapter: www.glowshiftdirect.com/boost...
Fuel Pressure Big Line Kit: www.glowshiftdirect.com/fuel-...
Snubber Valve Adapter: www.glowshiftdirect.com/1-8-2...
Drill & Tap Kit: www.glowshiftdirect.com/1-8-2...
Expandable Circuits: www.glowshiftdirect.com/expan...
3 Gauge Wiring Kit: www.glowshiftdirect.com/7-col...
GlowShift’s 7 Color Gauge Series features the option of the Tinted, Black, or White 7 Color Series. The Tinted 7 Series comes with a stealth-like tinted lens and black gauge face; the Black 7 Series has a black gauge face and magnified clear lens, and the White 7 Series comes with a white gauge face and magnified clear lens. All 7 Color Gauges come standard with ultra-bright analog LED displays, microprocessor-controlled stepper motor technology which allows for extremely accurate gauge readings and incredibly smooth needle movement, selectable 7 color LED through dial lighting, and an illuminated red needle that sweeps 270 degrees.
View our entire product lineup at www.glowshiftdirect.com/
Find us on social:
Facebook - / glowshift
Instagram - / glowshift
Twitter - / glowshift
#GlowShift
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process. - Auta a dopravní prostředky
I don’t even own a Cummins but this was cool and informative to watch.
I want to do this to my regular Ram gas truck 😅
Very helpful video thanks
Vraiment bien expliquer.
Ou peut on trouver le kit complet ?
Merci
On my 2012 RAM, both of the transmission lines run all the way to the front of the truck. No short line to remove. Can I cut the line on the truck? Doing this I worry about metal shavings. Thanks
Your fuse taps you installed. What one controlled the dimmers on the garages?
The one attached to the orange wires from the gauges.
How can I access the fuel filter housing to disconnect the line without tearing the whole truck apart? In the video you used two hands, there's no way without removing the throttle body and probably the battery
So for anyone wondering. I took the wheel well out and turned the wheel to the left. This gave me access to the fuel filter housing
Will this work with a 2019?
No, unfortunately it won't.