Video

Would it fit on a 2005 mustang gt?

I have found that it's better to cut off a couple of inches off of the radiator hose after cutting it in half, before assembling everything back together. Some of those hoses are in tightly confined spaces and adding length to the hose may throw other things off or cause a kink in the hose in first bend following the splice.

Mine is stuck at -5 digital gauge. Im hooked in properly. Not sure whats going on.

Just bought these for a ‘71 I’d imagine the process is pretty similar if not identical. Does the tachometer signal come from the LS computer? If memory serves it’s a white wire but I’d have to check.

Have a 2000 2500. Has stock lift pump. Do I really need the snubber valve, or is it mostly needed to protect my gauge?

I thought you couldn't use teflon tape on anything to do with oil...

Why do you put the pyro sensor in the manifold and not in the exhaust pipe after the turbo like on a big truck

So can you do boost, fuel, and transmission or do you have to do have exhaust temp?

My wideband afr gauge came with red, yellow, orange and black wires for power. It was not specified how to wire the yellow wire in this video

👏Unos duros muy buenos videos

Does anyone know if there’s a company that makes a 4 gauge pillar for the 2nd gen??

Can you use factory cluster with these gauges hopefully I didn’t waste my money and I have figure out the wiring’s on the gauges the mph doesn’t calculate and they act like there not grounded right

Which sandwich adaptor is used here please ? Thank 👍 you!

Having an issue on a 2003 5.9 where plugged into fuses based off install guide and it remains powered even when vehicle is off and light switches

If I’m running 2 seperate gauge pods how would I run the expandable circuits if there is only 1 constant power fuse and 1 ignition fuse and 1 headlight fuse do they need to be spliced together? To make 1 plug? I’m confused someone please help

is this universal? I have a mercedes s55 amg

Do these have a dimming feature along with the headlights for night time driving

Will these gauges work on a big block Chevy ?

Put the Teflon tape on backward

My temp gauge is just pegging out, any suggestions would be greatly appreciated. My factory gage broke and it not talking it the computer so I’m having to go aftermaerkt

Will these work on 82 k5 blazer

Why doesn’t the gauge cluster ever fit right to the dash in these trucks 😂

These are nice.

Anyone know the torque specs on the main bolt of sandwich plate

Does the kit come with ALL the parts? There’s parts there I haven’t seen before

Does anyone have a link to the red female terminal connector, can’t seem to find them anywhere

I have always been skeptical about wiring in vehicles, but with this awesome guide not anymore. You guys know your stuff and ate VERY informative.

Can these be used on a stock bezel? Yall only offer black bezels and no chrome ring bezels like my factory one

I think if you don’t have AC Instead of the block off plates some little cubby holes would be cool to put stuff in, l would just use the ac vents and take the vent part out and add a backing plate

Does anyone know if I have to cut from the Hot side or the Cold side before I order one, mine is a 03 is300 2jzge I prefer a accurate reading

Are the sensor for oil temperature and oil pressure in the same location at the engine? What if I want to install both temperature and oil pressure?

When purchasing the set does it come with the taps and adapters or do I have to select them under the “add ons” section?

I want to use this on a Gen 6 Camaro with the 2.0. Guys usually use a throttle body spacer and run a barb off the throttle body spacer to a hose to the gauge. Will that method work as well with this gauge?

I love the Glow brand. I have ledglow under body lights on my Sierra street truck and c6 vette and now glow shift elite boost and wide band for the truck.

Will this work with a 2008 doge 3500?

Chrome inserts on the inside lips of the bezel would amazing. Like some of the custom sets for the 72 models so the like and needle reflects off the chrome

Does anyone know where to install a water temp sensor

Hey Glowshift, do I need the 38mm hose adapter for the same type of Subaru just the naturally aspirated version? I don’t know how big the hose is and I can’t figure it out

What do you do with the factory oil pressure sensor?????, because the ecu will constantly show check engine light if its not connected.

Ok so I understand I shouldn't daisy chain more than 4 gauges per circuit. If I wanted to add 6 gauges to my truck, I can use 2 separate circuits right? Can I put a second set of expandable circuits on my fuse panel, eg. 2 separate yellows, 2 separate reds etc. etc.?

Is this sensor independent of the computer codes? Does the check engine light not come on? Or does the red oil light only come on

On my 2012 RAM, both of the transmission lines run all the way to the front of the truck. No short line to remove. Can I cut the line on the truck? Doing this I worry about metal shavings. Thanks

How do you read the odometer mine only says 37.4 on trip A?

My android touch screen i just installed i found out it has a rpm reading on it can i tap straight into the head unit all the wires?

Wouldn't you want the reading after the thermostat? This would be reading the temperature of the coolant directly after it ran through the radiator, not really representing what the engine temp is.

My kit has the t fit and port adapter. I want to use the port adapter. On my 06 dodge 48re. I know most go to pass side dip stick test port but there doesn't seem to be fluid flow there. Does it matter what test port is used? The port on driver side next to wire harness above trans cooler line has fluid flow. Could i use that one?

Does anyone makes custom pillars? I'd love to hire someone to make one for me. Don't have the skills or time to make one but really want one for my truck. I looked everywhere and no luck. No one makes them for my truck.

Guys, does anyone make these custom pillars? I would love to hire someone to make one for me. Please let me know.

Hole cutting guide is wrong. the Wiper switch was still located above the headlight switch all the way until 1983! They didn't move the wiper switch to the steering column until 1984

This is a really good video