Visiting Todd Clyne, The Polaris Triple Wedge Vintage Snowmobile Guru!
Vložit
- čas přidán 2. 10. 2023
- Todd and I trade some stories and some parts. It was a great time!
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage - Auta a dopravní prostředky
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop
The only two guys on CZcams that make me feel obligated to crack a beer every time a video starts.
Good times brother!!!
You got that right!
Just two good ole boys doing the two things the love the most. Drinking beer and working on 2-strokes.
Right on!
Great video, I am an avid watcher of both channels!
Awesome! Thank you!
Hey! My two favourite utube guys having beers together! Awesome! I appreciate you both so much for all you do in showing your projects, how to to repairs, and having fun while you do it! 👍
Thanks again for the appreciation guys! Hope that stuff works for you Todd
As for the anodized chassis I think you guys are on the right track on the 95/96 XCR guess. Looks like a totally customized sled for sure, with the long track and all the anodized stuff. Front suspension almost looks like extra 10, so maybe it’s a 97???
Anyways, great video guys! Glad to see the two of you together on the screen
Cheers 🍻🍻🍻🍻🍻
Thanks Rob!
Love it! My two favorite sled heads in one video, and between Todd’s XLT build, and your walnuts build, I’m in heaven!❤
Good to hear!
Both you guys bring so much to the table
Thanks!
Agreed!!
You guys need to do more together I just opened a beer to watch 👍👍👍🙂
It is a possibility.
Good very enjoyable 😉
Awesome vid! My 2 favorite YT channels! Cheers!
Thanks!
Love the content. Keep it up guys!
Thanks! Will do!
I worked at FL Motorsports and Tim and Kim are the best! Those sleds were off the hook. 😮
Dalebcs are awesome! I'd like to have one of these anodized sleds some day. This one belongs to Brad.
Great builds guys, keep up the good work!!
Thanks! Will do!
Cool video, nutter. I've been subscribed to Todd for a few years, now subscribed to you too. Cheers!
Awesome, thank you!
Great video ! Don’t know if you check older comments but I started watching Todd and he mentions you often as you know your videos started popping up so watched several and subscribed. Love what you guys do and appreciate it ! I’m in Maine and have a similar addictions ! You’re both gonna cost me a lot of money but knowing there are others out there makes me smile ! Take care
Thanks! Todd is a great guy!
Good old Forest Lake Motorsports. Bought my first jet ski in the 90's from there. A Yamaha Waverunner. LOL
Classic
The crossover we have all been waiting for!!
Been subscribed to both channels for awhile. Love your content fella’s! Cheers from NE Ohio
Awesome! Thank you!
I wouldnt change a thing my friend except inserting a fresh Miller Lite!!! lol
Great thanks for this
Our pleasure!
Great video you guys!
Thanks so much!
Good stuff!! Cheers! 🍻🍻🍻
Thank you! Cheers!
Todd does know a pretty sharp IT professional guy, no excuses on editing, Todd!
A+ you guys, hope to see you at Princeton next year.
See you there!
Great video!
Thanks!
The trading around parts story at about 14:00 is pretty freakin funny man 😂😂
We had a good time.
The sled with the red anodizing is most likely a Pro5 sled. Very few were made anodized. I have one myself.
Also really fun to see you both together...how isnt your 3rd gen all rusted out like my patriot blue 04 ram 😂
Great video ,
Thanks!
This made my day
Happy to hear that!
Just subscribed great video
Thanks for the sub!
Great to see you guys together. I’m starting a project but I’m trying to find out what’s the newest bulkhead I can put a wedge belly pan on ? Thanks in advance
That's probably a better question for Todd. I've not done any of those custom builds yet. I think the answer is an aggressive but I could be wrong.
Looks like a beer drinking day
Sure was!
Good Morning
Hi
Good evening
That was Marvs wife Diane's embroidery shop.
Thanks Tommy. You need to look at the sled the next time you are over.
🔥👊🔥⚙️🏍🔨
Will you be attending elk river swap meet?
Unless it's raining.
Awesome see you there. I’m going to be a swapper there.