Kubota L2501 DIY rear remote installation

Added a DIY two spool valve remote for a top tilt hydraulic cylinder on my L2501 Kubota tractor.
Below is the parts list from surpluscenter.com (With the exception of the hydraulic cylinder). I can build a kit for you using my mounting plate and mail it out to you ready to install. You would just need to drill two holes to mount the valve where I mounted mine. Contact me at [e-mail].
2 Spool Valve
Item Number: 9-7862
1/4" Quick Coupler
Item Number: 9-1626
1/4" NPT Male x 1/4" NPT Male Straight
Item Number: 9-5404-4-4
SAE 8 Male x 1/4" NPT Female Straight Adapter
Item Number: 9-6405-8-4
3/8" x 96" JIC 8F Swivel x JIC 8F Swivel Hydraulic Hose
Item Number: 931-2296
3/8" x 60" JIC 8F Swivel x JIC 8F Swivel Hydraulic Hose
Item Number: 931-2260
JIC 8 Male x JIC 8 Female Swivel x JIC 8 Male Tee Adapter
Item Number: 9-6602-8-8-8
JIC 8 Male x SAE 8 Male 90 Degree Elbow Adapter
Item Number: 9-6801-8-8
1.00" I.D. Nylon Hose Sleeve for 3/8" Hydraulic Hose
Item Number: 9-12496-6
JIC 8 Male x JIC 8 Female Swivel 90 Degree Elbow
Item Number: 9-6500-8-8

[@IsambardKingdom]

Great video thanks - have a Kubota L2404DT that needs remotes plumbed from the loader…..

[@Confederatemule]

You did a very good job of explaining this on your Kubota. I wish you were doing it on a 5145 Mahindra with FEL. I am installing a Prince model MB21GB5C1 valve so I can operate a ditch bank flail mower to the 5145 Mahindra. I do not know where to connect the inlet & outlet lines. Keep up the good videos.

[@davidlu7627]

Exactly what I want. Thank you

[@IsambardKingdom]

No sealant required on both types of the fittings you are using just oil to help tighten them - one is a compression flare the other utilises an o ring.

[@scottjohnson9094]

Where you hooked to the loader block what fittings was it, jic8?

[@klugekustomdesigns]

Yes sir JIC8