Z28 Hydroboost install. Should you do it?

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • Z28 Hydroboost install. Should you do it?
    After years of inadequate brakes due to my lumpy cam I decided to pull the trigger and install a Hydroboost system. The results were surprising.
    Get your Hydroboost at the best price your going to find: ebay.us/6Jk0Ph
    CCP Hose kit for Hydroboost super deal for sure: ebay.us/nJcXGY
    CCP inline filter : ebay.us/KJlGKl
    Follow me on Social media:
    Instagram: / photomikesgarage
    “Like” the Facebook page: / photomikesgarage

Komentáře • 42

  • @lamm442
    @lamm442 Před rokem +8

    Thanks for taking the time to show every step good or bad, nice job.

  • @raven69600
    @raven69600 Před rokem +2

    I’m definitely going to do this to my Firebird! The current brakes suck, especially with what I’m doing to it. A guy at work told me about this modification. This video confirms and does a great job of setting it up. I’m just glad my engine is still out so this should be pretty smooth.
    I can just leave the hoses lose until I drop it in🤙🏽

  • @flynnseddon4697
    @flynnseddon4697 Před 2 lety +4

    thank you for making a detailed video of this process I am just doing my CPP hydro install on my 69 C10 In in BC so thanks

    • @PhotomikesGarage
      @PhotomikesGarage  Před 2 lety

      Your welcome.

    • @mt186
      @mt186 Před rokem

      How did your install go and are you happy with it? Looking to do this on my 65 C10

  • @jeffreylynch3203
    @jeffreylynch3203 Před rokem +2

    You either have a tuning issue, or, more likely, you picked a cam with a very low lobe separation angle, which won’t produce much vacuum. People want the big cam sound, which is an LSA in the low numbers, usually 106 or less. Picking the right cam would have been easier.

  • @Fl4m3thro3er
    @Fl4m3thro3er Před rokem +2

    Thank you!!! Doing this on my 1973 Rs/LT that I’m ls3 stroker swapping.

  • @martysheets6882
    @martysheets6882 Před rokem +2

    Nice Cam Brother. Thanks for the advice, and help.

  • @fat_cat8457
    @fat_cat8457 Před rokem +2

    My 72’ gmc 2500 had a 1 1/4 inch master with a vacuum booster and a 1:2 ratio bracket (super stiff brake pedal with low brake pressure). The LS that’s going in it only gets 12” of vacuum at high idle. I’m now putting a Hydroboost unit with 1 1/8 and a 1:1 bracket (semi stiff brake pedal and very high pressure)

  • @JoeSmith-pe5qv
    @JoeSmith-pe5qv Před 2 lety +2

    love them did to my 69 camaro last year

  • @TheRolfano
    @TheRolfano Před měsícem +1

    Hey @PhotomikesGarage I assume thats the original style power steering pump and nothing special right?
    Love the car! My first car in 1979 was a 1973 Z28! Hoping some day to be able to buy one.

    • @PhotomikesGarage
      @PhotomikesGarage  Před měsícem +1

      Yep it's the stock power steering pump and works fine with the hydro boost.

  • @Artoconnell
    @Artoconnell Před 3 měsíci

    Amazing Car Mike, well done

  • @1080sucks
    @1080sucks Před 8 měsíci

    Smile says it all. Appreciate the video

  • @modifyit1
    @modifyit1 Před 5 měsíci

    Great video & good info 🇨🇦

  • @alirezashirazifard8990
    @alirezashirazifard8990 Před rokem +1

    You did a excellent job making it clear and explaining everything well . By the way the short cut was awesome

  • @hsimp316
    @hsimp316 Před rokem +1

    What about brake fluid?

  • @joelsalazar7133
    @joelsalazar7133 Před měsícem

    Any new updates on this system since you have Installed it?

  • @smithjo4152
    @smithjo4152 Před rokem +1

    Thank you for this video. Silly question, did you have to bleed the brake lines as well?

  • @mikeallen3646
    @mikeallen3646 Před 7 měsíci

    nice work , i just got one and getting ready to install, how bad was the bleeding the air process? any tips i would appreciate it

  • @jameerchavis6135
    @jameerchavis6135 Před 2 měsíci

    Was this hydro boost specific to your car?

  • @cedricdeoan1214
    @cedricdeoan1214 Před 9 měsíci

    Are you getting enough vacuum from the engine for your heater

  • @smithmj2010
    @smithmj2010 Před rokem

    Do you have drum on rear and disc on front. I noticed you dont have propositioning valve. I have disc front and drum rear, with valve and its not stopping as expected.

  • @doomman700
    @doomman700 Před 11 měsíci

    If I had power steering I would in a second. Not sure it’s better than a vacuum pump though. Engine blows up and you will be struggling to stop.

    • @PhotomikesGarage
      @PhotomikesGarage  Před 11 měsíci

      It has a reservoir to allow a few stops if the engine stopped.

  • @flynnseddon4697
    @flynnseddon4697 Před rokem +1

    Hello Mike I installed my hydro boost over the winter first mechanical test yesterday and the hydro boost system heated up the steering fluid like crazy and blew the seal in the steering box in 5 mins . The in line filter flow direction is it from the hydro boost towards the pump? that's the flow direction I put it in. wondering if I have it installed the wrong way ? any ideas would be appreciated.

    • @PhotomikesGarage
      @PhotomikesGarage  Před rokem

      Hi , I've got the filter in the lower pressure return line from the Hydro boost to the pump. the older pumps can barely handle the addition of the hydroboost so I may upgrade to a heavier duty one soon.

  • @theSword-
    @theSword- Před rokem

    Many pickups have hydroboosters on them.

  • @jaxjax5322
    @jaxjax5322 Před rokem

    Do you know if the hydroboost robs horsepower?

  • @dewaynemitchell3931
    @dewaynemitchell3931 Před rokem

    Hello have a question if you can help if you have the power steering pump with two return lines do i need to run a filter on both or is one ok such as the return line from the hydroboost to the power steering pump or from the power steering pump to the power steering box

    • @PhotomikesGarage
      @PhotomikesGarage  Před rokem

      Hi, Yes you should run just one filter and I put it in the low pressure return line.
      Thanks

  • @keithworker8556
    @keithworker8556 Před rokem +1

    Haha crawl in through the wheel well ,not me

  • @alirezashirazifard8990

    Glad it stops on a dime .

  • @muscleonly1
    @muscleonly1 Před 2 lety +2

    It would have been much easier to use a vacuum cannister to increase vacuum capacity than that hydro boost

    • @jmark7390
      @jmark7390 Před 2 lety

      How do you do that?

    • @Harrybowles1969
      @Harrybowles1969 Před rokem

      Not nearly as good

    • @Handlehandlebars
      @Handlehandlebars Před rokem

      u obviously never used eather of them lol. 🙄 make comments on somthing your actually know

  • @KFreebraaap
    @KFreebraaap Před rokem +1

    We are in America not England ZEEEEEEEEEEEEEEEEEE

  • @GUERRO06
    @GUERRO06 Před 8 měsíci

    MAGA!!!

  • @theungoliant9410
    @theungoliant9410 Před rokem +1

    Zed? R u a brit?